d
Electrical Connections (In the UK Only) The wires in this mains lead are coloured in accordance with the following code : Important GREEN AND YELLOW : EARTH BLUE : NEUTRAL BROWN : LIVE This appliance must be earthed As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows : The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter
Table of contents Introduction Installation Operation Suggestion on food storage Care and maintenance 2 Entry 3 Important safety instruction 3 Identification of parts 4 Where to install 6 Door removal 7 Door replacement 8 Feed water pipe installation 8 Height adjustment 9 Starting 10 Adjusting the temperatures and functions 10 Refreshment center (Applicable to some models only) 16 Shelf (Applicable to some models only) 17 Wine holder (Applicable to some models only) 17 Egg bo
Introduction Entry The model and serial numbers are found on the inner case or back of refrigerator compartment of this unit. These numbers are unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Staple your receipt here. Date of purchase Dealer purchased from Dealer address Dealer phone no. Model no. Serial no.
Introduction Child entrapment warning DANGER: Risk of child entrapment. Before you throw away your old refrigerator or freezer: Take off the doors but leave the shelves in place so that children may not easily climb inside. The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.
Introduction *Dispenser model Freezer Compartment Refrigerator Compartment Milk product corner Lamp Shelf Wine holder (Plastic or wire) Door Rack Automatic Icemaker Shelf or Drawer Shelf Can Server (Optional) Snack drawer (Optional) Lamp Shelf or Drawer Shelf (Folding or Normal) Refreshment center (Optional) Egg Box Vegetable Drawer (1 or 2) Drawer Door rack Humidity switch Drawer (2 or 3) Miracle Zone (Optional) Fresh compartment (Optional) Door Rack Door rack Conversion switch (Meats/Vegetabl
Installation Where to Install 1. Place your appliance where it is easy to use. Select a good location 2. Avoid placing the unit near heat sources, direct sunlight or moisture. 3. To ensure proper air circulation around the fridge -freezer, please maintain sufficient space on both the sides as well as top and maintain at least 2 inches (5 cm) from the rear wall. 4. To avoid vibrations, the appliance must be leveled. 5. Don't install the appliance below 5°C. It may cause affect the performance.
Installation Door removal Electric Shock Hazard Disconnect electrical supply to refrigerator before installing. Failure to do so could result in death or serious injury. If your access door is too narrow for the refrigerator to pass through, remove the refrigerator door and pass the refrigerator laterally. Remove the lower cover by lifting upward, and remove clip, and then pull up the feed water tube while pressing area shown in the figure to the right.
Installation Pass the refrigerator laterally through the access door as shown in the right figure. Pass the refrigerator Max 5 4 3 2 1 Min 1 FRZ TEMP 2 REF TEMP 3 4 5 Max Door replacement Mount them in the reverse sequence of removal after they pass through the access door. Feed water pipe installation (*Dispenser model only) Before installation Automatic ice maker operation needs water pressure of 147~834 kPa (1.5~8.
Installation Height adjustment If the freezer compartment door is lower than the refrigerator compartment door Level the door by inserting flat ( - type) driver into the groove of the left height adjusting screw and rotate it clockwise ( ). If the freezer compartment door is higher than the refrigerator compartment door Level the door by inserting flat ( - type) driver into the groove of the right height adjusting screw and rotate it clockwise ( ).
Operation Starting When your refrigerator is first installed, allow it to stabilize at normal operating temperatures for 2-3 hours prior to filling it with fresh or frozen foods. If operation is interrupted, wait 5 minutes before restarting.
Operation *Dispenser model NOTE • 11 Your model may not include every option.
Operation This function save the display power Press the FREEZER and EXPRESS FRZ. buttons simultaneously and hold them for 5 seconds until the Ding sounds. All LED/LCDs will then turn ON, then OFF. When the power saving mode is activated, the display will remain off until the next time the door is opened. Then, it will come on whenever a door is opened or a button is pressed and remain on for 20 seconds after the last door opening or button selection.
Operation Dispenser use (on some model) Select among crushed ice, water, and cubed ice and press the push switch with a glass or other container. Crushed Ice Light the crushed ice lamp by pressing the selection button. • Water Light the water lamp by pressing the selection button. Cubed Ice Light the cubed ice lamp by pressing the selection button. Reference : Hold your cup in place for a couple of seconds after dispensing ice or water so the last few drops go in to your cup instead of the floor.
Operation Ice is lumped together When ice is lumped together, take the ice lumps out of the ice storage bin, break them into small pieces, and then place them into the ice storage bin again. When the ice maker produces too small or lumped together ice, the amount of water supplied to the ice maker need to adjusted. Contact the service center. ❈ If ice is not used frequently, it may lump together. When ice maker does not operate smoothly Power failure Ice may drop into the freezer compartment.
Operation The other functions Door open warning 3 times of warning sounds at the interval of 30 seconds if a minute passes with the door of refrigerator and the hombar door opened or completely closed. Please contact with the local service center if warning continue to sound even after closing the door. Diagnosis (failure detection) function Diagnosis function automatically detects failure when failure is found in product during the use of refrigerator.
Operation Refreshment center (Applicable to some models only) How to use Open the refreshment center door. You can access the refreshment center without opening refrigerator door and thus saving electricity. Inner lamp is lit in refrigerator compartment when the refreshment center door opens. Thus it is easy to identify the contents. Never use the refreshment center door as a chopping board and take care not to damage it with sharp tools. Never rest your arms or severely press on it.
Operation Shelf (Applicable to some models only) Folding Shelf You can store taller items such as a gallon container or bottles by simply pushing in front half of shelf underneath back half of shelf. Pull toward you to return to a full shelf. Wine holder (Applicable to some models only) Wine holder adjustment (Type 1) Bottles can be stored laterally with this wine corner. This can be attached to any shelf.
Operation Humidity control in the vegetable compartment The humidity can be controlled by adjusting the humidity control switch to the left/right when storing vegetables or fruits.
Operation Miracle Zone Temperature Transition Corner (Applicable to some models only) By pressing the button, store vegetables, fruits or other types of food such as meat to be defrosted, raw fish, etc. Temperature Change at Miracle Zone (Applicable to some models only) Method to Use You can select optimum temperature range depending on types of foods stored. - 3-step of temperature selection including -3°C, -1°C and 4°C is available.
Suggestion on food storage Location of foods (Refer to identification of parts) Wine holder Store wine. Snack drawer Store small foods such as bread, snacks, etc.. Freezer compartment shelf Store various frozen foods such as meat, fish, ice cream, frozen snacks, etc.. Freezer compartment door rack Freezer compartment drawer Store small packed frozen food. Temperature is likely to increase as door opens. So, do not store long-term food such ice cream, etc.. Store meat, fish, chicken, etc.
Suggestion on food storage Storing foods Store fresh food in the refrigerator compartment. How food is frozen and thawed is an important factor in maintaining its freshness and flavor. Do not store food which goes bad easily at low temperatures, such as bananas, and melons. Allow hot food to cool prior to storing, placing hot food in the refrigerator could spoil other food, and lead to higher energy consumption. When storing the food, cover it with vinyl wrap or store in a container with a lid.
Care and maintenance How to dismantle parts NOTE • Dismantling is done in the reverse sequence of assembly. Be sure to unplug the power plug before dismantling and assembly. Never apply severe force to dismantle parts. Parts may be damaged. Separate the lamp by pulling it out ➂ while slightly pressing ➀ and rotating ➁ the lamp cover. Turn the bulb counterclockwise. Use a 40-watt bulb (max.) which can be purchased at a service center.
Care and maintenance To remove the lamp cover, press the protrusion under the lamp cover to the front and then pull the lamp cover out. Turn the bulb counterclockwise. Max. 40 W bulb for refrigerator is used and can be purchased at a service center. Lamp in refrigerator compartment Refreshment center Separate the bin ( ) to upward. Separate the upper rack of the refreshment center and then pull out the refreshment center cover ( ). The refreshment center can be removed by pulling it upwards.
0 Care and maintenance 0 Suggestion on food storage General information Vacation time During average length vacations, you will probably find it best to leave the refrigerator in operation. Place freezable items in freezer for longer life. When you plan not to operate, remove all food, disconnect the power cord, clean the interior thoroughly, and leave each door OPEN to prevent odor formation.
Care and maintenance Trouble shooting Before calling for service, review this list. It may save you both time and expense. This list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Occurrence Possible cause Solution Runing of refrigerator Refrigerator compressor does not run. Refrigerator runs too much or too long Refrigerator control is off. Set refrigerator control. See setting the controls. Refrigerator is in defrost cycle.
Care and maintenance Occurrence Possible cause Refrigerator compressor does not run. Thermostat is keeping the refrigerator at a constant temperature. This is normal. The refrigerator goes on and off to keep the temperature constant. Freezer control is set too cold Set the freezer control to a warmer setting until the freezer temperature is satisfactory. Refrigerator control is set too cold. Set the refrigerator control to a warmer setting Refrigerator control is set too cold. See above solution.
Care and maintenance Possible cause Occurrence Solution Sound and noise Louder sound levels when refrigerator is on. Today’s refrigerators have increased storage capacity and maintain more even temperatures. It is normal for sound levels to be higher. Louder sound levels when compressor comes on. Refrigerator operates at higher pressures during the start of the ON cycle. This is normal. The sound will level off as the refrigerator continues to run. Vibrating or rattling noise.
Care and maintenance Occurrence Possible cause Solution Odors in refrigerator Interior needs to be cleaned. Clean interior with sponge,warm water and baking soda. Food with strong odor is in the refrigerator. Cover food completely. Some containers and wrapping materials produce odors. Use a different container or brand of wrapping materials. Door(s) will not close. Food package is keeping door open. Move packages that keep door from closing. Door(s) will not close.
Care and maintenance Occurrence Possible cause Dispenser will not dispense ice. Ice has melted and frozen around auger due to infrequent use, temperature fluctuations and/or power outrages. Remove ice storage bin, and thaw and the contents. Clean bin, wipe dry and replace in proper position. When new ice is made, dispenser should operate. Ice dispenser is jammed. Ice cubes are jammed between the ice maker arm and back of the bin. Remove the ice cubes that are jamming the dispenser.
P/NO : MFL38287401 Printed in Poland
