User guide

43Installation
Installation
3
Initialize
[Factory Set]
You can reset the recorder to all its factory
settings. Some options cannot be reset
(Rating and Password). The [Setup Wizard]
menu appears on the screen after the
factory settings.
NOTE
• If you reset the unit to its original factory settings
using [Factory Set] option, you have to set the
network settings activation again.
• The [Initialization] option is not available while
recording or [Lock] in the [Setup] menu is set to
[On].
• If you select [Factory Set] in the Setup menu, All
the channels will be deleted.
[Internal HDD Format]
Everything recorded on the HDD will be
erased.
1. Press HOME.
2. Use
U
/
u
/
I
/
i
to select [Setup] in the
[Home] menu, and press ENTER ( ).
3. Use
U
/
u
to select [OTHERS] option from the
[Setup] menu, and press ENTER ( ).
4. Use
U
/
u
to select [Initialize], and press
ENTER ( ) to display the sub-options.
5. Use
U
/
u
to select [Internal HDD Format],
and press ENTER ( ).
Select [No] and press ENTER ( ) to cancel.
6. Use
I
/
i
to select [Yes], and press
ENTER ( ) to start the HDD format.
Select [OK] and press ENTER ( ) to return
to the previous step.
Software
[Information]
Displays the current software version.
[Update]
You can update the software by connecting
the unit directly to the software update
server (see page 102-103).
Disclaimer Notice
Press ENTER ( ) to view the notice of Network
Service Disclaimer on page 108.
Auto Power Off
The screen saver appears when you leave
the player in Stop mode for about ve
minutes. If you set this option to [On], the unit
automatically turns itself o after the Screen
Saver is displayed for 25 minutes.
Set this option to [O ] to leave the screen
saver until the unit is operated by the user.
NOTE
If you set [Auto power o] to [On], the unit will be
turned o automatically after displaying [No signal]
or [Not programmed] message for 30 minutes.
Power Save Mode
Selects whether this recorder is in power
save mode when the power is turned o. This
option is not available when a timer recording
is set.
[On]
The front panel display is o and only
signals arriving at the antenna input are
passed through when the recorder is
turned o.
[O]
Turns o the [Power Save Mode] function.