Owners manual

ENGLISH

OPERATION

Stairways and Landings

Use the Dusting Brush or Upholstery Nozzle on

stairs and landings. Make sure the vacuum cleaner

is placed so that it cannot tip or fall. See page 12 for

instructions on selecting and using attachments.

Agitator Motor Overload

Protection

The agitator has a built-in protection against motor

damage should the agitator jam. If the agitator

slows down or stops, the agitator overload protector

shuts off the agitator motor. The suction motor will

remain on at this time.

To correct problem: Turn off and unplug vacuum

cleaner, remove obstruction and press the reset

button.

Thermal Overload Protection

This vacuum cleaner has a thermal overload

protector which automatically activates to protect

the vacuum cleaner from overheating. If a clog

disturbs the normal flow of air to the motor, the

thermal protector turns the motor off automatically

to allow the motor to cool in order to prevent

possible damage to the vacuum cleaner.

To correct the problem: Turn the vacuum cleaner

off and unplug the power cord. Check for and

remove clogs, if necessary. Also check and clean

any dirty filters.

Wait approximately 30 minutes and plug the

vacuum cleaner in and turn back on to see if the

motor protector has reset. The thermal protector

system will not reset until the vacuum cleaner has

completely cooled down.