Owners manual

20
INSTALLATION
ENGLISH
1
Remove the top hinge cover screws .
Lift the hook (not visible), located at the
bottom of the front side of the cover
,
with a flat-head screwdriver.
2
Using a 10mm or 13/32-inch socket
wrench, remove the three bolts and lift off
the top hinge. Set parts aside.
Reversing the Doors
(On Freezer Drawer Models)
CAUTION
When lifting the hinge, be careful that
the door does not fall forward.
3
Lift the door from the middle hinge pin and
remove the door.
4
Remove the four screws
1
, the hinge
pin insert
2
and the hinge pin brackets
3
from the bottom right side of the door.
5
Reinstall the hinge pin brackets
1
, screws
2
and hinge pin insert
3
on the bottom
left side of the door.
CAUTION
Place the door, inside facing up, on a
non-scratching surface.
3
3
6
Use a ¼ inch hex socket wrench to loosen
the hinge pin
1
and remove. Remove the
two bolts
2
, the screw
3
and the hinge
4
.
3
4
1_MFL67855701_Eng.indd 20 2013.7.24 11:45:16 AM