Owners manual

25
INSTALLATION
ENGLISH
14
Using a 13/32 in. socket wrench with a 2
in. extension and a screwdriver, tighten the
two bolts and the screw, and assemble
the bottom hinge on the left side of the
flange.
15
Attach the hinge pin using a ¼ in. socket
wrench.
16
With a flat-head screwdriver, carefully pry
off and remove the cover over the bolt
holes on the left side of the refrigerator.
17
Remove the outer lower decorative screw
from the flange on the frame between
the freezer and refrigerator doors. (You
will need this hole for the middle hinge
bracket.)
18
Flip the middle hinge bracket and position
it on the left side of the refrigerator and
reattach it with two bolts and a screw.
19
Place the freezer door down on the bottom
hinge pin.
20
Reattach the middle hinge pin using a ¼
inch socket wrench. Replace the washer.
NOTE
The bracket has been flipped, but the
hinge pin stays in the same orientation
with its hexagonal end facing upward.
Bottom Hinge Pin
Middle Hinge Pin
Washer
Middle Hinge Bracket
Bottom Hinge
Pin
1_MFL67855701_Eng.indd 25 2013.7.24 11:45:25 AM