Owners manual

20
How to set convection auto conversion
function(For the Lower oven only )
When using convection bake and roast, the
Convection Auto Conversion feature will automatically
convert entered regular baking temperatures to
convection baking temperatures.
This feature is activated so that the display will show
the actual converted (reduced) temperature. For
example, if you enter a regular recipe temperature of
350°F and press the START function, the display will
show the converted temperature of 325°F.
➊ Touch the SETTING pad once.
“AUTO” will appear in the display.
➋ Touch the # 1 pad to ENABLE or
touch the # 2 pad to DISABLE.
➌ Touch the START pad to accept
the change.
How to adjust the oven thermostat
(For both the Upper & Lower ovens)
You may find that your new oven cooks differently
than the one it replaced. Use your new oven for a few
weeks to become more familiar with it. If you still think
your new oven is too hot or too cold, you can adjust
the thermostat yourself.
Do not use thermometers,such as those found in grocery
stores, to check the temperature setting of your oven.
These thermometers may vary 20–40 degrees.
NOTE:
This adjustment will not affect the broiling or the Self
Clean temperatures. The adjustment will be retained
in memory after a power failure.
The oven temperature can be increased (+) or
decreased (-) as much as 35°F or 19°C.
NOTE:
Once the temperature is increased or decreased, the display
will show the adjusted temperature until it is readjusted.
NOTE:
The thermostat adjustment for Bake will also affect
Convection Bake or Convection Roast.
To Adjust the Oven Temperature
(For the Lower oven only)
➊ Touch SETTING pad 2 times for the
lower oven, "L-AJ" will appear in
the display.
➋ Using the number pad enter the
temperature correction you wish
to adjust. Example: to adjust the
oven temperature UP 15 degrees,
touch 15.
➌ Touch START pad to accept the
change.
➍ To lower the oven temperature
enter 15 then touch SETTING pad
to DECREASE the temperature,
(for - value).
➎ Touch START pad to accept the
change.
(For the Upper oven only)
➊ Touch SETTING pad 3 times for
the lower oven, “U-AJ" will appear
in the display.
➋ Using the number pad enter the
temperature correction you wish
to adjust.
Example: to adjust the oven
temperature UP 15 degrees,
touch 15.
➌ Touch START pad to accept the
change.
➍ To lower the oven temperature
enter 15 then touch SETTING pad
to DECREASE the temperature,
(for - value).
➎ Touch START pad to accept the
change.
OPERATING INSTRUCTIONS
SPECIAL FEATURES OF YOUR OVEN CONTROL
Your new touch pad control has additional features that you may choose to use. The following pages
describe these features and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day.
They remain in the control’s memory until the steps are repeated.
When the display shows your choice, touch the START pad. The special features will remain in memory after a
power failure.
SETTING
SETTING
SETTING
START
LOCKOUT
START
LOCKOUT
START
LOCKOUT
START
LOCKOUT
START
LOCKOUT
1
2
or
SETTING
SETTING
1 5
1 5