ENGLISH Portable Navigation OWNER’S MANUAL LN500 Series Please read this manual carefully before operating your Navigation device. Keep it for future reference. Designs and specifications are subject to change without prior notice for improvement.
Table of contents Safety note 5-10 Supplied parts 11 Part names 12-13 Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Rear / Side panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Connecting devices 14-21 Installation sequence for the suction-cup mount . . . . .14-15 Detaching the suction-cup mount . . . . . . . . . . . . . . . . . .16 Installing the external GPS antenna (Optional) . . . . . .16-17 Installing Microsoft ActiveSync . . . . . . . .
Table of contents Finding a location with navigation 32-45 Address Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-33 Go to your Destination . . . . . . . . . . . . . . . . . . . . . . . . . .33 Add to My Places . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Recent Places . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 My Places . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Favourite Groups . . . . . . . . . . . . . . . . . . .
Table of contents Installation 53-55 Installing the Navigator “PC Portal” . . . . . . . . . . . . . .53-54 Recommended PC System Requirements . . . . . . . . . . .54 Starting the “PC Portal” Wizard . . . . . . . . . . . . . . . . . . . .55 Using software 56-63 Using the “PC Portal” . . . . . . . . . . . . . . . . . . . . . . . .56-58 Installing Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Removing Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety note CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Safety note Always operate the vehicle in a safe manner. Do not become distracted by the navigation while driving, and always be fully aware of all driving conditions. Minimize the amount of time spent viewing the navigation screen while driving and use voice prompts when possible. Do not enter destinations, change settings, or access any functions requiring prolonged use of the unit’s controls while driving. Pull over in a safe and legal manner before attempting such operations.
Safety note Note that malfunctions may occur if you use the product in places where static electricity occurs frequently. Do not use the unit near water. Do not touch the unit with wet hands. Do not attempt to disassemble or repair the product yourself. Do not use the product for other purposes than those described in this guide. Do not use for many hours at extremely low or high temperatures. (-10°C~60°C) Avoid leaving the product in hot or humid places.
Safety note If you notice unusual odours, excessive heat coming from the product, anything else that seems unusual, do not use the product and contact our Customer Service Centre. Always use soft and dry cotton cloth when cleaning the product. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. When attaching a navigation holder, remove impurities from the surface before attaching, and press the suction lever to avoid falling.
Safety note • If you attach the vacuum disk on the glass for a long period of time, the pressure in the disk slowly reduces and the vacuum disk may fall off. • The Navigator holder may fall off at a sudden stop, thus causing a dangerous situation. We recommend it should be installed close to the dashboard so it can be supported properly. • Applying too much force to adjust while the connecting arm is tightly fixed, may deform the rubber disk connecting all the components.
Safety note • Never leave your unit/accessories (including windshield mount, car charger etc) visible in an unattended vehicle, since it’s an easy target for thieves. • Back up your data using our provided software in the CD. • In order to protect the screen and the unit, always store it in the carry case. • Do not use the memory card (SD card) with any other devices since the memory card could be damaged. • The unit has to be outdoors to locate the current position from satellite.
Supplied parts Main Body GPS Antenna (Optional) Cigarette Lighter Carrying Case Adapter (Optional) Suction-Cup USB Cable Mount Installation CD Quick Reference Guide Contents may be changed without notice.
Part names Front panel 2 1 3 4 RESET 1. LCD 2. MENU button Moves to the main menu screen Power sleep Entering power sleep mode. ON: Press and hold. OFF: Press and hold again. Volume Up Increases the volume level. 3. 5 4. Volume Down Decreases the volume level. 5. RESET hole If the unit does not operate properly, press the reset button using a ball point pen or a similar tool. To activate the menu function on LCD screen, touch the LCD screen with a finger.
Part names Rear / Side panel 1 2 3 6 4 5 7 1. External GPS Antenna Port (Optional) 5. Memory Card Slot Insert an SD Memory Card. 2. Speaker Gives voice guidance service. 6. 3. Docking connector Power ON / OFF button ON: Slide switch up. OFF: Slide switch down. 4. USB port 7. Power supply connector DC 5V Deleting or altering the map data in the built-in memory or the SD memory card randomly, may cause problems in the navigation function.
Connecting devices Installation sequence for the suction-cup mount 1. 2. Select the most suitable position on the windscreen. Clean the surface of the windscreen, to remove any dust and grease. 3. Place the suction-cup mount on a suitable position on the windscreen. 4. Push back the lever to the left until you hear a click, fixing the suction-cup mount in position. 5. Align the docking connector at the suction-cup mount to mount then push the unit down until you hear a click.
Connecting devices 6. Plug the small end of the cigarette lighter adapter into the power supply connector at the side of the unit. 7. Plug the other end into your vehicle’s 12V (cigarette lighter) socket. 8. To adjust the angle of the mount, slacken the adjustable knobs at the suction-cup and then turn it gently. In addition to tilting the mount up and down and from side to side, you can also rotate the mount, from the left, -45-45°. 9. When you finish, tighten up the knobs again.
Connecting devices Detaching the suction-cup mount 1. To separate the mount, pull the lever to the right. 2. If the mount still doesn’t detach from the windscreen, pull up handle of suction cup to move the suction rubber. Installing the external GPS antenna (Optional) This unit has a built-in GPS antenna to receive the satellite signals. The external GPS antenna is sold separately and may improve the receiving condition of satellite signals when the signals are poor. 1. 2.
Connecting devices When Installing the antenna inside the vehicle (on the dashboard or shelf) Affix the external GPS antenna on as level a surface as possible where the external GPS antenna faces outside the window. (The GPS antenna is fastened with double-sided tape.) • Make sure the surface is free of moisture, dust, grime, oil, etc., before affixing the sheet. • The double-sided tape contains a strong adhesive and may leave a mark on the dashboard if removed.
Connecting devices Installing Microsoft ActiveSync In order to synchronize your data between your PC and the unit, you need the Microsoft ActiveSync program. 1. 2. Click ActiveSync “setup.exe”. Click “Next” to install Microsoft ActiveSync on your PC. 3. Read the following license agreement carefully and select “I accept the terms in the license agreement”. 4. Click “Next”. 5. Enter your information. 6. Click “Next”. 7.
Connecting devices 5. 6. The “Add New Hardware Wizard” should automatically install the USB drivers. Follow the on screen instructions to establish a partnership and synchronize your unit with your PC. Downloading files: ActiveSync 1. 2. 3. Open Windows Explorer on your PC. The Mobile Device is displayed in Window explorer. Create the folder you want to use. Select the file you want to save, then drag and drop it to the removable disk. • ActiveSync installation is required for USB operation.
Connecting devices Data exchange via card reader. You can transfer data via ActiveSync. However, if you wish to copy large quantities of data (Music and Photo files) to the memory card these can also be stored directly to the memory card. 1. 2. 3. Insert the SD card into your card reader. Insert the card reader into your computer's USB port. An icon is displayed in the system tray if successfully connected. Not supplied. Downloading files: Removable disk 1. 2. 3. Open Windows Explorer on your PC.
Connecting devices Disconnecting the USB device Wait until you get a message that you can safely unplug the device before disconnecting the USB device. 1. The safe to remove icon is in the system tray. 2. Click on the icon to eject the unit from the PC and select the ‘Safely remove’ message. A message will appear indicating that it is now safe to disconnect the unit. You can now go ahead and unplug the memory card reader from the PC. 3. 4.
Before operation Starting up The navigation software and the digital map material are supplied in the built-in memory. Installation is fairly automatic. Built-in memory: The application and maps are stored in the built-in memory. Push the Power button up to turn on the device. The Map screen is displayed It may take some time until the GPS receiver initially acquires enough satellites' data during the first use of the GPS navigation equipment.
Before operation Navigation features The Navigation System provides the following features for easy navigation: • Route calculation within seconds. • High quality 2D/3D maps with display of street names. • Address input via a full-size keyboard optimized for finger input address. • Storing of any location one click away. • Cross border navigation without switching maps. • Address retrieval from History, Favourites, Points of Interest (POI) or Microsoft® Outlook® contacts.
Getting started with navigation Navigation Menu Tapping “Navi menu ” button brings up a menu that allows you to access some of the most frequently used functions of the navigator. Address Screen The “Address” button lets you navigate to an address. For a complete description of how to navigate to an address, see "Enter Address" on the page 31. Recent Places Screen The “Recent Places” button lets you navigate to a previously visited destination.
Getting started with navigation POI Screen When you tap the “POI” button, the first screen of popular place categories appears. The “POI” button lets you navigate to thousands of interesting places, such as beaches, parks, hotels, museums, and restaurants. For more information, see "POI" on the page 38. Route Manager Screen You can tap the “Route Manager” button to determine the map display and to show the generated route after you have selected a location.
Getting started with navigation Menu Buttons Tap this button to go to the Main Map screen. Tap this button to configure the settings options. Tap this button to open the Media Player. Tap this button to recalculate the route. The Cancel Route button, on the Route Manager menu, stops the current navigation and clears the route. This feature is active only after a destination has been set. Tap this button to move between the Setup and Extras menus.
Getting started with navigation Main Map When you tap the “Map” button on the Navigation menu screens, the Main Map screen appears. You can use the icons displayed on this screen to view your route. Tap “Zoom Out” or “Zoom In” buttons to increase or decrease the detail of the map view. When tapping the “Zoom Out” button, the map displays more of the route. Tap the compass to change the map view display as follows: 2D map view with the forward direction at the top.
Getting started with navigation The GPS bar is a toggle button that displays the remaining travel distance and travel time, and estimated time of arrival. Point on the Map You can navigate to any point by tapping its location directly on the Main Map screen in both 2D and 3D map view. This feature is especially helpful when you want to navigate to a specific point on the map, but you don’t have the street address.
Getting started with navigation Screen Buttons The following buttons appear on many of the navigation screens. When you tap the “OK” button for a selected address, group, or place, Navigator automatically opens the next screen in the sequence. When you tap the “Back” button, the navigation returns you to the previous screen. When you tap the “Go” button, the navigation calculates the route to your selected destination.
Getting started with navigation Cycling Through Screens Every navigation function in the system, such as Address, POI, or My Favourites consists of a sequence of screens. You can cycle through the screen sequences by either: • Selecting an item from the list and tapping it. • Selecting an item from the list and tapping the “OK” button. The sequence ends with the Show on Map screen, where the destination is displayed and the “Go” button is available for you to calculate a route.
Getting started with navigation Enter Address When you tap the “Address” button, the “Select State” screen appears. You can use the keyboard to enter the characters of the state name. For more information, see "Address screen" on the page 32. After you have selected a state, the Navigator displays the “Mode” screen. This sequence displays the following address screens: City, Street, Address Number. You can also navigate a city or a street only.
Finding a location with navigation Address Screen 1. You can use the keyboard to enter the characters of the address name. 2. The characters appear in the Address field. The Navigator automatically searches the Address list for the first occurrence of the entered characters. 3. After you have selected a city, the Navigator displays the next address field, such as street and address number. 4. You can also tap the “OK” button to move through the sequence of address screens.
Finding a location with navigation You can change your address search method by tapping the Mode button to select from a variety of address formats, as described in Address Modes (See "Enter Address" on page 31). • If the entered characters are not found at the beginning of the name in the Address list, the Smart Search System automatically searches for the entered characters throughout the entire list, for example, in the middle or the end of the name.
Finding a location with navigation Add to My Places Lets you add an address to your list of favourite locations, as shown in the figure below. For more information, see “My Places” on page 35. Recent Places The Recent Locations screen lets you select an existing destination from a list of destinations that you have previously travelIed to. 1. To navigate to a recent destination, tap the “Recent Places” button. 2. From the Recent Locations screen, select a location and tap the “OK” button. 3.
Finding a location with navigation My Places A Favourite is a destination that you have stored for easy retrieval. 1. To access a favourite destination, open the Navigations menu and tap the “My Places” button. 2. The My Favourites screen displays your favourites groups. 3. When you tap on a selected group, the Navigator automatically displays its stored locations. 4. Tap the selected location to show your destination on a map. 5. Tap the “Go” button to calculate your route.
Finding a location with navigation Favourite Groups You can tap the “Edit” button from the “My Places” screen to add, edit, or delete groups, as described below. Enter the group name and select an icon to identify the group. The icon identifies all destinations located in that group, as displayed on the map. You can change the name and icon. The My Friends group cannot be edited. When you tap this button, the selected group and its associated entries are removed. The My Friends group cannot be deleted.
Finding a location with navigation You can disable the alerts for all groups by selecting the 1st Alert setting to Off. You can disable the alerts for a particular group by clearing the checkbox next to the selected group. Activate that disabled alert by selecting the checkbox next to the group. Favourite Alert settings affect all Favourites group. The 2nd Alert must be set to go off at closer distance than the 1st Alert. Alerts can be set for a group but not for individual locations.
Finding a location with navigation POI (Points of Interest) The POI list is a collection of hundreds of interesting or useful places organized by easy-to-find categories. For example, you can use the Navigator to guide you to a shopping centre, hotel, restaurant, or gas station. 1. From the Navigations menu, tap the “POI” button. 2. The POI Popular Category screen appears, which lets you quickly select from common points of interest. 3.
Finding a location with navigation Subcategories Many categories have subcategories to provide for an even greater list of choices. For example, "Petrol Station" may have many subcategories each representing a particular brand name. The same is also true for "Hotels". "Restaurants" have subcategories that represent different types of food, such as American, Italian, and French.
Finding a location with navigation Enter the location distance to search for a designated place. For example, if you enter 5 km, the Navigator only searches within a five kilometre radius. When you select a large search radius, you risk the chance of finding too many locations, which makes it harder to find the place that you are searching for. It is best to start with a small search radius size, and then make it larger if necessary.
Finding a location with navigation Route Manager From the Navigations menu, tap the “Route Manager” button to display Navigator’s route navigation features, as described in the sections below.
Finding a location with navigation Route Summary The “Route Summary” button lets you display an overview of your complete route on the Map screen, the total driving distance to your destination, the estimated travel time, and the complete destination address. Detour You can specify that certain roads be permanently excluded from your route calculations. Use this feature when you want to avoid congested roads, toll roads, or unsafe streets. 1. From the “Route Manager” menu, tap the “Detour” button. 2.
Finding a location with navigation Route Playback This feature lets you record your route as you’re driving and then to play it back on the Main Map screen. 1. To record a route, tap the “Record” button in the Route Playback screen. The navigator shows the Main Map screen and navigates you to the selected destination. 2. To stop recording, return to the Route Playback screen and tap the “Stop” button. 3. To playback your recording, select the data file, and tap the “Play” button.
Finding a location with navigation Multistop planner Edit Way Points lets you plan a route with up to 5 stops. When you tap the “Go” button, the route is calculated in stages, from the departure point to the first stop. When you reach the first stop, the route recalculates to the second stop, and so on. Setting Stops Along the Route 1. From the “Select/Add Multistop Route” screen, tap the “Add” button to add a stop by Address, POI, My Favourites, or Recent Locations. 2.
Finding a location with navigation Route Options You can use Route options to determine what road categories to avoid or allow and to set the default route type when Navigator calculates your selected destination. Avoid Roads Toll, Highway, and Ferry route sections are avoided or allowed as determined by whether they are selected, when Navigator calculates a route. You cannot allow or avoid specific toll roads or ferry routes.
Setup Display Tap the “Display” button to determine how Navigator’s map view is displayed, as shown below. Dimension The 2D and 3D Mode buttons lets you display the map view in 2-dimensional or 3-dimensional views for either day or night driving. Day&Night The Day and Night Mode buttons lets you display the map view for either day or night driving. Map Display The Pedestrian Mode button lets you toggle between travelling as a pedestrian or in a vehicle.
Setup Map Views The map views below let you see the differences between 2d/3d day/night conditions.
Setup Units & Time You can tap the “Units & Time” button to specify units of measure system and adjust the time as displayed on your Navigator. Distance Unit Miles : Display and announce in miles Kilometres : Display and announce in kilometres. Adjust Hour You will see the current values of GMT, and use one time zone, Greenwich Mean TIME (GMT). Language Lets you select the language for text and voice travel messages and driving directions.
Setup Unreliable GPS Signal Warns that the GPS signal is too low and unreliable for navigation. This prompt is automatically active by default. Travelling to... Reminder at the start of each journey. This prompt is automatically active by default. Say Rd You can set the type of the guidance name that you will use to navigate the route. GPS Status The Navigator uses the GPS receiver to pinpoint your location.
Setup GPS Not Found When you first start the Navigator you will hear the message “Signal too low”. This message means that your navigation device hasn’t yet located a reliable GPS signal. Check that your device is connected to the cigarette lighter and has a clear view of the sky. The “GPS not found” message means that there is no GPS antenna or the antenna is not properly installed. Please check that: • The GPS antenna has a clear view of the sky for uninterrupted GPS reception.
Setup From the Setup menu, tap the “More” button, to display the Navigator add-ons as described in the section below. Tutorial When you first start the Navigator, a message box appears prompting you to open the Navigator Guided Tour program. The Guided Tour is an excellent way of becoming familiar with the different navigation features available. You can also start the Navigator Guided Tour any time, by tapping the “Tutorial” button from the “Extras” menu.
Setup Select Map This feature lets you change the currently selected map to another map saved on your SD memory card. If you want to store additional maps on your memory card. You can tap the “Select Map” button to display the maps saved on your SD memory card. The Select Map screen displays map details and version numbers. The map currently used appears at the top of the list. Lets you refresh the screen when a new memory card is inserted into the device. Lets you permanently remove a selected map.
Installation Installing the Navigator “PC Portal” It should be install the Microsoft .Net Framework 2.0 from the install screen. 1. Insert the Navigator CD into the PC's CD-ROM drive. The “PC Portal” Installation wizard prompts you to select the language used for the installation process. When you have selected a language, click “OK”. 2. Read the Welcome message and click “Next”. 3.
Installation 8. From the Select Language dialog box, you can select the display language for the “PC Portal”. Select the Launch “PC Portal” checkbox for “PC Portal” to immediately start and click “OK”. Alternatively, you can start the “PC Portal” from the Microsoft® Windows® Programs menu. 9. Select from up to two connected devices. (LN500) You can uninstall the “PC Portal” by opening the Microsoft® Windows Programs menu, selecting LGE > Uninstall “PC Portal”.
Installation Starting the “PC Portal” Wizard The first time you start the “PC Portal”, the “PC Portal” Wizard automatically starts, letting you install Navigator software, supported languages and voice prompts, and maps. For a complete description of the “PC Portal”, see Using the “PC Portal” on page 56. 1. Click the Microsoft® Windows® Start button. 2. Click the Programs > LGE > “PC Portal”. The “PC Portal” appears. 3.
Using software Using the “PC Portal” Click “Install Software” and select from the following components to install to your device: • LGE: GPS navigation software • Tutorial: Tutorial guide To install Navigator components: 1. From the Install Software screen, select from the list of components, as described above. 2. Click the Install button. 3. Navigator “PC Portal” installs the selected components to the device’s main memory. Click “Manage Maps” to install or remove a map.
Using software Click the “Backup/Restore” button to backup the following Navigator items: • Favorites: All locations that are displayed in Navigator’s Favorites screens. • Trips: All locations that appear in Navigator’s Multistops screens. • LGE Settings: Setting configurations, such as map views (2D/3D and Day/Night), prompts, units of measurement, and map and route setting preferences. When you select Backup, “PC Portal” makes a copy and stores the information to your computer.
Using software Click to import favorite locations from your PC to the selected My Favorites group on your device. For more information, see “Importing Favorite Locations” on page 60. Click the “Select Language” button to show a list of languages that you can choose from to display the “PC Portal”. Click the “About” button to check software version. Click the “User Manual” button to see a user manual. Click Install Languages to install a language to your device. To install languages: 1.
Using software Installing Maps 1. From the Desktop Maps pane, select a map. 2. From the “Target” context box, select a target option, such as Storage Card or Main Memory. 3. When you select a Target option (Storage Card, Main Memory) the “PC Portal” displays the following information: • Required: The amount of free space necessary to install the map on the selected Target option. • Available: The amount of free space available for the selected Target option.
Using software Removing Maps You can remove a map by selecting a map in the Device Maps pane and clicking the “Add/Remove” button. Before removing maps, you must set in Media Player (Music, Photo) mode. And then, you can remove a map. Importing Favorite Locations Import Favorites lets you import content created externally as a new Favorites category. You can download a category of favorite destinations from your PC to your device. Destination data must be contained in a comma-separated values (.csv) file.
Using software The .csv file contains the following fields: Fav. Name Notes Longitude Latitude Altitude City Street Address Fav.place 1 Comm. 1 39.21370 8033 Munich Adaloweg 173 38.78903 • The longitude, latitude, and altitude are numerical values. All other fields contain string values. • Even if the .csv file does not contain longitude, latitude, and altitude values, the separating commas must still be included. • The .
Using software General Warning Messages The following warning messages can appear when you’re working with Navigator “PC Portal”. Lost connection If at any point during the installation or data transfer, transfer the connection to the device is lost, the following message is displayed: "Connection to the device has been lost. Please check your connection.
Using software If maps from a previous version is located on your computer, the following message is displayed: "Existing maps data found. Do you want to keep it?" Clicking “Yes” lets you install maps from previous versions. Previous maps The following message appears when you have selected an installed map and clicked the Actions button: "Selected maps shall be removed from your device.
Photo Viewer Getting Started You can open the Photo Viewer by clicking the “Photo” button. The Photo Viewer lets you view pictures from your unit. This application recognizes JPG and BMP files. The Photo Viewer’s main features let you zoom in or zoom out, rotate an image, and display a series of pictures through a slide show. Browse to an Image When you open the Photo Viewer, the Photo list screen is displayed, showing the top level folders on your device.
Photo Viewer Viewing Image Tap an image file icon in the Photo list screen to view. The image appears in the View Image screen, as shown below. The following buttons are provided to let you display images from the View Image screen: The m or M button lets you display the previous or next image in the sequence of image files located in the selected folder. The X button lets you pause the slide show. To play again, touch the B button.
Music Player Getting Started You can open the Music Player by clicking the “Music” button. • Sampling Frequency: 8 - 48kHz (MP3) • Bit rate: within 8 - 320 kbps (MP3) (include VBR) Playing Music Tap a music file in the Music list screen to listen. The m or M button lets you select the skip or search in the music files located in the selected folder. Skip the next track Tap briefly the M button to select the next track. Skip the previous track Tap briefly the m button within 5 seconds of playing time.
Music Player The “Repeat” button lets you set the repeat playback mode. : Plays repeatedly the current selected file. : Plays repeatedly within folder. The “Shuffle” button lets you set the random playback mode. : Plays randomly within folder. : Plays randomly all files. You can tap the “Return” button to close the Music Player and return to the Source menu. The “List” button lets you return to the Music list screen. You can select one of 2 modes. It displays the change of sound output during playback.
Troubleshooting Navigation program and map data protection • If you want to operate this product properly, there should be the same programs (Contained in LGE folder) and maps (Contained in LGE folder) in the SD memory card (Built-in memory) which are provided by LGE. • Don't erase or modify the contents in the LGE folder! (It contains important data for Navigation. Deleting this data will prevent the Navigator from operating correctly.) • Don't delete inner data of the product by using ActiveSync.
Troubleshooting Cannot hear the voice guide. You can hear the voice guide when you select “Guidance” in “Setup”. But during actual driving, the voice guide is not heard. If the volume is too low, adjust the volume on the right unit. Cannot see the map. This is when you cannot see the map even when you have executed the navigation menu. This happens when the data within the memory is damaged. Delete all the data within the memory and reinstall the data.
Troubleshooting What is GPS? The Global Positioning System (GPS) is a satellite-based navigation system made up of a network of 24 satellites placed into orbit by the U.S. Department of Defence. GPS was originally intended for military applications, but in the 1980s, the government made the system available for civilian use. GPS works in any weather conditions, anywhere in the world, 24 hours a day. There are no subscription fees or setup charges to use GPS.
Specifications ITEM SPECIFICATION REMARK OS CPU MEMORY Win CE 5.0 Centrality Atlas-II ARM9 LN500 : 512MB DISPLAY 3.5 inch TFT LCD Resolution 320 X 240 LED type Backlight Touch Screen LG Philps LCD Mono, Internal Speaker Typical 1.0W (1EA) AUDIO GPS SiRF star III, Internal Antenna NAVI Full Map MAP Sensis POWER Built-in Memory Analog resisitive type Voice Guidance DC 5.0 +/- 0.
Support-Hotline * You can download the Update Software from http://www.lge.com/support/software.jsp for free. * You can purchase the Upgrade Map from LG Authorized Service Centres. For more information, contact Call Centre or Website. LG Subsidiary Country Service Number LG Electronics Australia Pty Ltd. AUSTRIA 800 18 740 421 850 111 154 * For the latest Call Center numbers, please visit Website (www.lge.
