User’s Guide M197WA Make sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the product and give the information to your dealer when you ask for service.
Before Connecting to the PC Stand Installation Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off. 1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Insert the stand base into the product 3 Attach the monitor to the Stand Base by turning the screw to the right.
Before Connecting to the PC Detaching Stand Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off. 1 Place the set screen side down on a cushion or soft cloth. 2 Detach the monitor to the Stand Base by turning the screw to the left. 3 Turn the screw by using the screw handle 4 Pull the stand base.
Before Connecting to the PC Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range -6° ~ -2° 12°~ 18° Warning: When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s).
Before Connecting to the PC WALL MOUNT:HORIZONTAL INSTALLATION For proper ventilation,allow a clearance of 4 inches on each side and from the wall. Detailed installation instructions are available from your dealer,see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
Name and Function of the Parts Name of the Remote Control Buttons TV/PC : Selects TV or PC mode. Switches the set on. POWER TV/PC INPUT POWER INPUT MUTE PSM SSM I/II Input Each time you press the Input button it will change to TV AV Component RGB DVI HDMI If nothing is inputted for several seconds the screen will automatically move to the selected menu. TV AV Component RGB DVI HDMI OK LIST Q.VIEW MUTE PR VOL OK Switches the sound on or off.
Name and Function of the Parts Name of the Remote Control Buttons I/II : Bilingual choice and sound mode selection [TV] TV/PC MUTE POWER PSM INPUT SSM I/II To switch from Stereo to Mono sound in case of stereo transmission, or from Nicam Stereo to Nicam Mono, in case of digital transmission. to switch from Nicam Dual I to Nicam Dual II or Nicam Dual I+II in case of Nicam Dual transmission.
Name and Function of the Parts Name of the Remote Control Buttons (Depends on the country the remote control can be provided different.) PR ( ) Buttons Able to change channel. PR OK VOL VOL PR MENU SLEEP ARC/ * * PR VOL ( ) Buttons Able to adjust sound. OK Button Use when functional adjustment is completed. Double press the OK button, then Auto Config. (Only RGB input) MENU Use this button to enter the On Screen Display menu.
Name and Function of the Parts Remote Control - Using the Teletext function If you don't, the teletext may not appear correctly on the screen. TEXT LIST Q.VIEW To select the teletext on or off. The main index page or the last selected page appears on the screen together with an information headline and an option line at the bottom of the screen. PR OK VOL VOL Yellow key Favourite Program On : Rotate favourite channel Favourite Program Off : To display the previously selected TV channel.
Name and Function of the Parts Remote Control - Using the Teletext function SLEEP MENU HOLD REVEAL ARC/ MIX SIZE ? INDEX * i MODE TEXT REVEAL Press the button to reveal/conceal the hidden information, such as solutions to riddles and puzzles. Press this button again to remove the information from the display. TIME M UPDATE X INDEX To display the main index. MODE The mode will be switched in the Teletext mode. UPDATE Press the button to appear the TV programme.
Name and Function of the Parts Rear View AC IN AC IN COMPONENT IN AUDIO IN (RGB/DVI) AV IN Y AC IN S-VIDEO HDMI IN VIDEO PB VIDEO PR L ANTENNA/ CABLE IN AUDIO R R AUDIO RGB IN (PC) (MONO) L DVI-D IN (PC) AC IN Power Connector : Connect the power cord. AV Input Terminal HDMI Digital Signal Connector DVI Digital Signal Connector RGB, DVI Sound Jack : Connect to the jack in the PC sound card. D-Sub Analog Signal Connector TV Tuner Jack : Connect the antenna.
AC IN Name and Function of the Parts AV Input Terminal S-VIDEO S-Video Input Terminal VIDEO Video Input Terminal (MONO) L AUDIO R Audio Input Terminal 11
Connecting to External Devices Connecting to your PC 1. First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. Rear side of the product. COMPONENT IN AUDIO IN (RGB/DVI) AV IN Y S-VIDEO VIDEO PB HDMI VIDEO PR AC IN ANTENNA/ CABLE IN AUDIO R A L R AUDIO RGB IN (PC) (MONO) L DVI-D IN (PC) Connecting with the D-Sub signal input cable. AC IN RGB IN (PC) Rear side of the product.
Connecting to External Devices 3. Rear side of the product. Connect the power cord. COMPONENT IN AUDIO IN (RGB/DVI) AV IN Y S-VIDEO VIDEO PB HDMI VIDEO PR AC IN R Turn on power by pressing the power button on the product. ANTENNA/ CABLE IN AUDIO R 4. 1 L AUDIO RGB IN (PC) (MONO) L DVI-D IN (PC) Power button AC IN 2 Turn on the PC. 5. Select an input signal. Press the INPUT button on the remote control to select the input signal.
Connecting to External Devices Connecting to VCR/DVD 1. Connect the video/audio cable as shown in the figure below and then connect the power cord (See page 13). A When using the RCA cable. • Connect the input terminal with a proper colour match. VCR/DVD Rear side of the Product RCA Cable (Not included) VIDEO OUT VIDEO (MONO) L AUDIO R AUDIO OUT S-VIDEO B When using the S-Video cable. • Connect to the S-Video input terminal to watch high image quality movies.
Connecting to External Devices 2. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT OK Or, press the INPUT button at the top side of the product. INPUT OK A When connecting with a RCA cable. • Select AV B When connecting with a S-Video cable.
Connecting to External Devices Connecting to Set-top Box /DVD (480p/576p/720p/1080i/480i/576i) 1. Connect the video/audio cable as shown in the figure below and then connect the power cord (See page 13). • Connect the input terminal with a proper colour match. Rear side of the Product Set-top Box /DVD COMPONENT IN Y Component Cable (Not included) Y Pb PR Pr VIDEO COMPONENT IN L AUDIO R AUDIO L Audio Cable (Not included) R 2. VIDEO PB Select an input signal.
Connecting to External Devices When watching HDMI from the DVD/Set-top Box 1. Connect the HDMI cable as shown in the below figure and then connect the power cord. (see page 13) [Rear side of the Product] [Rear side of the Product] AUDIO IN (RGB/DVI) HDMI IN HDMI IN RCA Stereo cable (not included) HDMI to DVI cable (not included) HDMI cable (not included) AUDIO DVI OUTPUT L R HDMI OUTPUT [Set-top Box/DVD] 2. [Set-top Box/DVD] Select an input signal.
Connecting to External Devices When Watching TV 1. Check if the antenna cable is connected at the rear side of the product and then, connect the power cord. Rear Side of the Product COMPONENT IN AUDIO IN (RGB/DVI) AV IN Y S-VIDEO VIDEO PB HDMI VIDEO PR AC IN L ANTENNA/ CABLE IN AUDIO R AUDIO R RGB IN (PC) (MONO) L DVI-D IN (PC) ANTENNA/ CABLE IN Antenna Cable (Not included.) 2. Select an input signal. Press the INPUT button on the remote control to select the input signal.
To arrange cables using cable management 1. Tie cables together with a cable management as shown in the illustration.
Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit INPUT MENU OK VOL PR Power Indicator Power Button OSD Select/Adjust Button • This Indicator lights up blue when the display operates normally (On Mode). If the display is in Sleep (Energy Saving) Mode, this indicator colour changes to amber. • Use this button to turn the product on and off. • Use this button to select an icon or adjust the setting in the OSD screen. • Use this button to control the channel for the TV signal.
Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit MENU Button • Use this button to show/hide the OSD (On Screen Display) menu screen.
Adjusting the Screen OSD (On Screen Display) Menu Icon Function Description Set/Select the channel when using the TV Station Adjusting the picture function. Picture Adjusting the sound function. Sound Adjusting the time function. Time Selecting the special function. Special Adjusting the screen function. Screen Note OSD(On Screen Display) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation.
Adjusting the Screen OSD (On Screen Display) Screen Tracking Order PR PR MENU VOL OK VOL VOL OK VOL OK MENU PR PR Pop up the menu screen OK Move where you want to adjust Select a menu icon Adjust the status Save adjustment Exit from the menu screen. • Use the remote control to adjust the OSD screen. 1 Press the MENU Button, then the main menu of the OSD will appear. 2 To access a control, use the 3 When the icon you want becomes highlighted, press the OK Button.
Adjusting the Screen STATION ID set/Select the channel when using the TV Auto programme Station Auto programme Manual programme Programme edit Favourite programme To set OK MENU System It should be set before run auto searching. Press the buttons to select the TV system of the country or part of the world from where you want to receive the TV channels. * Supporting channel : C(V/UHF 02~69) S(Cable 01~41) BG : PAL B/G, SECAM B/G (Europe/East Europe) I : PAL I/II (U.
Adjusting the Screen STATION ID set/Select the channel when using the TV Press the buttons to select VHF/UHF for aerial channels or Cable for cable channels. To select the channel reception type. : VHF/UHF / Cable. Band Channel If you know the channel number, enter it directly with the digit buttons 0 to 9. Fine In case of poor reception, you can improve the reception by fine tuning. Use the buttons to fine tune for the best picture and sound. Search Use the Name To see the assigned channel name.
Adjusting the Screen STATION ID set/Select the channel when using the TV Favourite programme Station Auto programme Manual programme Programme edit Favourite programme Off __ __ __ __ __ __ __ __ _____ _____ _____ _____ _____ _____ _____ _____ OK MENU This function lets you select your favourite programmes directly. (8 channel) Press the buttons to select a channel.
Adjusting the Screen PICTURE ID adjust the picture function(RGB/DVI) PSM PSM CSM XD Cinema Reset < Picture Dynamic Standard Mild Game User OK MENU The PSM function automatically adjusts the screen image quality. • Dynamic Select this option to display with a sharp image. • Standard The most general and natural screen display status. • Mild Select this option to display with a mild image. • Game Select this option to enjoy dynamic image when playing a game.
Adjusting the Screen PICTURE ID adjust the picture function (TV/AV/Component/HDMI) PSM PSM CSM XD Cinema Reset < Picture Dynamic Standard Mild Game User OK MENU The PSM function automatically adjusts the screen image quality. • Dynamic Select this option to display with a sharp image. • Standard The most general and natural screen display status. • Mild Select this option to display with a mild image. • Game Select this option to enjoy dynamic image when playing a game.
Adjusting the Screen SOUND ID to adjust the sound function SSM AVL Balance < Sound 0 Flat Music Movie Sports User OK MENU SSM The best sound tone quality will be selected automatically depending on the video type that you're currently watching. • Flat : The most commanding and natural audio. • Music : Select this option to enjoy the original sound when listening to the music. • Movie : Select this option to enjoy sublime sound. • Sports : Select this option to watch sports broadcasting.
Adjusting the Screen TIME ID to adjust the time function Time Clock Off time On time Auto sleep -- : -- OK MENU Clock This function is used to set up of current time. You must set the time correctly before using On/Off time function. 1) Press the MENU button and then use button to select the TIME menu. button to select the Clock menu. 2) Press the button and then use button and then use button to set the hour(00~23). 3) Press 4) Press button and then use button to set the minutes(00~59).
Adjusting the Screen SPECIAL ID to Select the special function Special Language Child lock DDC-CI XD Demo OK MENU Language To choose the language in which the control names are displayed. Child lock Use the buttons to select On or Off. It can be set up so that it can only be used with the remote control. This feature can prevent unauthorized viewing. In order to lock the OSD screen adjustment, set the Child lock tab to the 'On' position.
Adjusting the Screen SCREEN ID to adjust the screen function Resolution Auto config. Manual config. ARC Reset < Screen 1024 x 768 1280 x 768 1360 x 768 1366 x 768 OK MENU Resolution To view the best resolution of RGB-PC mode. Select the same resolution on OSD with PC's. It's working at RGB-PC mode when vertical frequency is 60Hz. Auto config. This button is for the automatic adjustment of the screen Position, Clock and Phase. (It is not working in DVI.) Manual config.
Troubleshooting No image is displayed ● Is the product's power cord connected? • Check if the power cord is properly connected to the outlet. ● Is the power indicator turning on? • See if the power switch is turned on. ● Power is on, power indicator is blue but the screen appears extremely dark. • Adjust brightness and contrast again. ● Does the power indicator look amber? • If the product is in power saving mode, move the mouse or press any key.
Troubleshooting The screen image looks abnormal. ● Is the screen position wrong? • Adjust the Position menu in OSD . • See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel – Display – Setting menu. ● Do thin lines appear on the background screen? • Adjust the Clock menu in OSD. ● Horizontal noise appears or the characters look blurred. • Adjust the Phase menu in OSD.
Troubleshooting The audio function does not work. ● No sound? • Check if the audio cable is connected properly. • Adjust the volume. • Check if the sound is set properly. ● Sound is too low. • Adjust the volume. The TV function does not work. ● The TV signal is not being received. • See if you have selected the proper channel mode. • Use the automatic channel setup function. • Check if the TV antenna is properly connected. Screen colour is abnormal. ● Screen has poor colour resolution (16 colours).
Specifications The product specifications can change without prior notice for product improvement. LCD Panel Video Signal Screen Type Pixel Pitch 18.51 inches Wide (47.01 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 47.01 cm 0.10(H) x 0.30(V) mm Max.