Owners manual

37
ge
me
e.
e.
oto
er
Image size – Touch to set the
size (in pixels) of the picture
you take. Select a pixel value
from the numerical options:
3M
(2048x1536), 2M (1600x1200),
1M (1280x960), VGA (640x480),
QVGA (320x240)
.
ISO – The ISO rating determines
the sensitivity of the camera’s
light sensor. The higher the ISO,
the more sensitive the camera
will be. This is useful under
darker conditions when you
cannot use the flash. Select from
ISO values of
Auto , 400,200
and 100 .
White balance – Choose from
Auto , Incandescent , Sunny ,
Fluorescent , and Cloudy .
Timer – The self-timer allows
you to set a delay after the
shutter is pressed. Select
Off ,
3 secs., 5 secs., or 10 secs.
This is ideal if you want to be
included in a photo.
Image quality – Choose from
Super fine , Fine , and Normal .
The finer the quality, the sharper
the photo. However, the file size
will increase as a result, which
means you’ll be able to store
fewer photos in the memory.
Auto review – If you set Auto
review on, it will show you the
picture you have just taken
automatically.
Shutter sound – Select one of
the four shutter sounds.
Tag location – Activate to use
your phone’s location-based
services. Take pictures wherever
you are and tag them with the
location. If you upload tagged
pictures to a blog that supports
geotagging, you can see the
pictures displayed on a map.
NOTE: This function is only
available when GPS is active.
Reset – Restore all camera
default settings.