Full Product Manual

2 5
OPERATION
EN GLI SH
T imer O n/ O ff
The Timer feature serves as an ext ra timer in the
kitchen that beeps when the set time has run out. It
does not start or stop cooking.
The Timer feature can be used during any of the oven
control functions.
Setting th e T imer
1
Set the oven mode knob to the O ff position.
2
Press T imer O n/ O ff. 0 : 0 0 with H R inside it
appears and T imer flashes in the display.
3
Press plus( + ) or minus( - ) to set the desired
time. Plus( + ) increases the time and minus( - )
decreases the time.
4
Press T imer O n/ O ff or Start to start the Timer.
The remaining time countdown appears in the
display.
N O T E
If Timer On/ Off is pressed again after the timer
has started, the timer function is canceled.
5
When the set time runs out, End shows in the
display. The indicator tones sound every 1 5
seconds until T imer O n/ O ff is pressed.
N O T E
•
If the remaining time is not in the display, recall
the remaining time by pressing T imer O n/ O ff.
•
Press T imer O n/ O ff twice to set the time in
minutes and seconds.
•
Press T imer O n/ O ff once to set the time in
hours and minutes.
Canceling th e T imer
1
Press T imer O n/ O ff once.
The display returns to the time of day.
W i- Fi
The Wi-Fi button is used to connect the appliance to
a home Wi-Fi network.
1
Set the oven mode knob to the O ff position.
2
Press and hold T imer O n/ O ff for 3 seconds.
3
The power on chime sounds, SEt appears in the
display, and the Wi-Fi icon ( ) blinks.
4
Register the appliance on the Wi-Fi network
using the smart phone app.
5
To disconnect the appliance from the network,
delete it from the registered appliances in the app.
N O T E
See the Smart Functions section in the owner’ s
manual for more details.
Settings
Set the oven mode knob to the O ff position.
Press and hold Start T ime for three seconds
(LSE46 1 7 model only) or press Setting.
Then press the Start T ime (LSE46 1 7 model only) or
Setting key repeatedly to toggle through and change
oven settings.
The Setting key allows you to:
•
set the hour mode on the clock (1 2 or 24 hours)
•
enable/ disable convection auto conversion
•
adj ust the oven temperature
•
activate/ deactivate the preheating alarm light
•
set the beeper volume
•
switch the temperature scale between Fahrenheit
and Celsius
•
activate/ deactivate the cooktop beeper
Setting th e H our Mode
The control is set to use a 1 2-hour clock. To reset the
clock to 24-hour mode, follow the steps below.
1
Set the oven mode knob to the O ff position.
2
Press and hold Start T ime for 3 seconds
(LSE46 1 7 model only) or press Setting.
3
Press plus( + ) or minus( - ) to set the desired
hour mode on the clock.
4
Press Start to accept the desired change.
Setting Conv ection A uto Conv ersion
When Conv . Bake and Conv . Roast are selected,
Convection Auto Conversion automatically converts the
standard recipe temperature entered to a convection
temperature by subtracting 25 ° F / 1 4 ° C. This
auto-converted temperature shows on the display. For
ex ample, select Conv . Bake, enter 350 ° F, and 325 ° F
shows on the display after preheat.
Convection Auto Conversion is enabled by default. To
change the setting, follow these instructions.
1
Set the oven mode knob to the O ff position.
2
Press and hold Start T ime for 3 seconds
(LSE46 1 7 model only) or press Setting. Then
press Start T ime (LSE46 1 7 model only) or
Setting repeatedly until “
” appears in the
display.
3
Press plus( + ) or minus( - ) to turn the feature on/
off.
4
Press Start to accept the change.