Owner’s manual Please read this manual carefully before operating your device. MODEL : PD239W/ PD239P/ PD239Y/ PD239TW/ PD239TP/ PD239TY/ PD239SP ENGLISH Bluetooth® The actual device may differ from the image.
Safety information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous.
CAUTION: yy The apparatus should not be exposed to water (dripping or splashing) and objects filled with liquids, such as vases, shouldn’t be placed on the apparatus. yy Minimum distance around the apparatus for sufficient ventilation, no less than 5 cm. yy The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains etc. yy No naked flame sources, such as lighted candles, should be placed on the apparatus.
Contents Safety information . . . . . . . . . . . . . . . . . . . . . . 2 STEP 1 Getting Started . . . . . . . . . . . . . . . . . . 6 Supplied items . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . 6 Power On / Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 STEP 2 Charging Battery . . . . . . . . . . . . . . . . 7 STEP 3 Inserting Photo Paper . . . . . . . .
STEP 1 Getting Started Product Overview Switch (Power) Supplied items Paper exit slot Micro USB port (for recharging) LG Pocket Photo Printer Reset hole LED indicator USB cable ZINK Photo Paper Charger Simple manual yy Depending on the model, supplied items may differ. (ex. Charger, Photo Paper etc.
Power On / Off STEP 2 Charging Battery This device uses built-in battery. Before using it, charge the battery in full. (Refer to below) On: Slide the switch to direction of the arrow. Off: Slide the switch to the opposite direction. Battery charging time : 1.5 hours ,,Note yy When turning the device on, LED indicator flashes for 5 sec. Then printing is available. yy For more information, see “About LED indicator”.
Charger (AC Adapter) yy Model : ADS-5MA-06A 05050GPG/ ADS-5MA-06A 05050GPCU/ ADS-5MA-06A 05050GPB/ ADS-5MA06A 05050GPI/ ADS-5MA-06A 05050GPSA yy Manufacturer : SHENZHEN HONOR ELECTRONIC CO. ,LTD. yy Input : 100 - 240 V ~, 50 / 60 Hz Max. 0.3 A yy Output : 5 V 0 1.0 A >>Caution y Handle with care during charging to prevent y electric shock. yy Do not place near heating appliance. yy Do not disassemble or deform. yy Do not give shock on. yy Avoid too high or low temperature or humidity.
STEP 3 Inserting Photo Paper 1. Open the upper cover. 2. Unwrap the pack of the photo papers. 3. Slide Smart Sheet (Blue) and photo papers together into the Paper insert slot. Smart Sheet will be ejected automatically before first printing. yy Do not insert more than 1 pack (10 Photo papers and 1 Smart Sheet). Otherwise 2 papers may be ejected at once or paper jam may occur. y y Once the pack is unwrap, keep the remaining papers after using in an airtight plastic bag.
Cleaning printer head using Smart Sheet Smart sheet (Cleaner) When you insert new smart sheet and photo papers, this device scans the barcode of smart sheet to maintain optimized photo paper. (It will be ejected before the first printing.) Note on Smart sheet When using Smart Sheet, it should be used with photo papers in the same pouch. yy Using smart sheet from other pouch may result in low quality. yy If print quality is abnormal or low, print out the smart sheet 3-5 times repeatedly.
Use exclusive photo paper for LG Pocket Photo. Otherwise, the print quality cannot be guaranteed, and it may cause damage of Pocket Photo. Note on Photo paper yy Do not damage or bend the papers. yy Using soiled paper may result in malfunction. yy Ensure to use the papers within its valid date. yy Using photo papers from other company may result in malfunction, paper jam or low quality. yy Do not place inside a car or, expose to direct sunlight or moisture.
Paper Jam Solution Using NFC Do not pull the paper out. Turn the device off and on again, the paper will be ejected automatically. yy If there are foreign material or dust on the roller, it may not be ejected properly. In that case, remove the foreign material of the head with scotch tape first. And then, clean using smart sheet and try again. Refer to “Printing using NFC” . Taging: Tagging for the first time, it links to Play Store where you can download LG Pocket Photo App.
yy To optimize printing photo, activate all modes and use pocket photo App. App Setting Bluetooth® Set the options in [Setting].
Installing App for iPhone From App Store Search for “LG Pocket Photo”. Using QR code Scan the QR code on the product box. Setting Bluetooth of iPhone 1. On your iPhone’s home screen, touch [Settings]. 2. Touch “Bluetooth” and touch the slider to turn Bluetooth [On]. 3. To connect your Pocket Photo device to the iPhone, turn on your device and make sure it is discoverable mode. 4. When you find the device, touch the model name of Pocket Photo on the screen.
STEP 5 Printing Photo Printing using Android phone Printing using Bluetooth ( Bluetooth® ) Bluetooth® Preparation : Turn the device on, and start printing with the LED indicator turning on. 1. Run LG Pocket Photo App on Android phone. 2. Select a photo to print, and touch [ ]. 3. Touch [OK], then it will start searching for Bluetooth devices. yy To print, set print mode or the number of photo on the preview screen. 4.
Printing using NFC ( ) Check whether your Android phone supports NFC first. Bluetooth® yy How to read NFC tag : Bring your smartphone close to the NFC tag on the device. NFC 1. Tagging for the first time, it links to Play Store where you can download LG Pocket Photo App. 2. Go to [Setting] in the App installed, and check [NFC]. 16 3. Choose a photo to print and tag, then printing is started immediately. From this time, you can run the App and print a photo by just tagging.
>>Caution yy If NFC tag is not read, check its position on LG Pocket Photo and smartphone. Then try again. (Depending on the type of smartphone, the position of NFC tag on it may differ.) yy If your smartphone case is plated with chrome, NFC is unavailable. Depending on your case’s material or thickness, NFC may not be read well. yy Do not place the smartphone on the pocket photo when using NFC.(Same image can be printed repeatedly.
Setting Pocket Photo App of Android phone You can check remaining battery, the number of photos printed, Help, Where to buy paper, device version, update, MAC address, and setting of print mode, etc. 1. Run LG Pocket Photo App on Android phone. (To check [Device information], set to [On] the Bluetooth of smartphone.) [ ] Paper Full [ ] Image Full Auto Power Off 2. Go to Setting. 3. Touch [Device Information]. Prints without white space. (The edge of the image can be cut off.
yy If Smart Sheet is in the device, it will be ejected before starting printing. Printing using iPhone Printing using Bluetooth ( ) Bluetooth® Preparation : Turn the device on, and start printing with the LED indicator turning on. 1. Run LG Pocket Photo App on iPhone. 2. Select a photo to print, and touch [ ]. 3. “Do you want to print?” message appeares. Touch [OK] to start printing. yy To print set print mode or the number of photo on the preview screen.
Setting iPhone Pocket Photo App You can check remaining battery, the number of the photos printed, Help, Where to buy paper, device version, update, MAC address, and setting of print mode, etc. 1. Run LG Pocket Photo App on iPhone. (To check [Device information], set to [On] the Bluetooth of iPhone.) [ ] Paper Full [ ] Image Full Auto Power Off 2. Go to Setting. 3. Touch Setting options to change. Prints without white space. (The edge of the image can be cut off.) Prints an image as a whole.
Using the edit mode You can edit a photo quality, color or size using edition tool on the menu. Use the edit function with a variety of image correction filter Notes on the printing yy The printed image may differ from the orginal image due to the printing method (thermal transfer printing). yy Use the lastest App of LG Pocket Photo ( when printing a photo, it makes optimized image.) yy The higher resolution the image has, the higher quality the printed photo has.
yy If pairing multiple smartphone, re-pairing may occur. >>Caution y Do not pull paper out by force during y printing. yy Do not open the upper cover during printing. yy Do not place an object in front of the Paper exit slot. yy If the device is vibrated or given shock, the quality of the printed photo may be reduced. yy Printing for Passport / VISA image may be unsuitable as the case may be. Printing the image taken in studio is recommended.
4. Touch [Update]button to update the device. Checking Label In case there are more than a LG Pocket Photo device, check MAC address on the product label to choose one you want to use. ,,Note yy During the device update procedure, do not turn off the power or press Reset button. yy This device cannot be updated to previous version. yy If there is no higher version, the Message [This is the lastest version.] appears. 1. Open the upper cover.
About LED Indicator The LED indicators shows the device condition. 2. You can find the product label. ,,Note When power is turned on, you cannot open the upper cover. To open it, turn off the power. LED color Condition/ Power Waiting/ On Updating/ Blink 24 Description Waits for printing. Device turns itself off, if it is left unused for a while.
Off Error/ blink Charging Full charge To print, turn on the device. Update Failed To print, turn on the device. Battery is fully charged. While continuous Battery is high printing, battery temperature temperature is (above 45 °C) overheated. (Wait for a while.) Error/Blink No paper, Paper jam, Cancelled, Opened, Low/high temperature, Unsupported file format Low battery/ Blink To print, charge the device.
Printing/ Blink Transferring data via Bluetooth or Printing After continuous printing the device Cooling mode/ may automatically Blink cool down its internal temperature. Wait for a while to print again. 26 Specifications Photo size 50 mm x 76 mm (Dot size : 640 x 1224) Image file type/ size PNG (Max: 1350x1050), JPEG (Baseline) / less than 10 MB (Progressive JPEG is not supported.
LED indicator Power / Waiting / Bluetooth transmitting / Charged / Discharged / Error / Condition of printer/ Update Communication Bluetooth 4.0 External connector Micro USB port for charging battery Bus Power Supply (USB) (Adapter) DC 5 V 0 1.0 A Battery life 500 mAh Li-Polymer rechargeable battery Power supply AC adapter (DC 5 V 0 1.
Troubleshooting Symptom No power Cause / Solution The battery is discharged. Be sure the device is connected to charger or PC properly when charging. Bluetooth paring Switch Bluetooth off and on does not work well. again on your smartphone, then pair with the device in the smartphone’s settings. Turn on the device and try printing (pairing) again in 5 sec. Be sure the device is on. The paper is jammed before printing. The paper is jammed during printing. The printed photo has lines.
White space appears at the edge of the paper. When print mode is set to [ ] , white space may appears if the aspect ratio of the paper and your image is not the same. When print mode is set to [ ] , the edge of the image can be cut off or white space at the edge of the paper may appear. Quality of printed photo is too low. In case you magnify an image using [ ] menu in the App, the quality of the printed photo may be reduced.
Device does not print. Preheating is needed. Wait for about 2 min. Be sure there are papers in the device. It may take time to print after Smart Sheet is ejected. Be sure the photo file is less than 10 MB. Only baseline JPEG, PNG (Max: 1350x1050) format is supported. Device is turned off Check [Auto Power Off ] time automatically. in the App’s setting. Above solutions do Press Reset hole with a not work. pointed thing like mechanical pencil to initialize.