User manual

78
CUSTOMIZINGSETTINGS
Menu Description
Colour
Temperature
In Expert mode, you can customize the options of
each mode.
Gamma: Select 1.9, 2.2,or 2.4.
a. Method:2Points
- Pattern:Inner, Outer
- Points:Low,High
- Red/Green/Blue: The adjustment range for
each colour is from -50 to +50.
- Applytoallinputs: The values of the Colour
Temperature is applied to all the input modes.
b.Method:20PointIRE
- Pattern:Inner, Outer
- IRE (Institute of Radio Engineers) is the unit
indicating the size of a video signal and can be
set to 5,10,15, … 100.You can ne-tune for
each setting as shown below.
- Luminance: The adjustment range is 50 to
500.
- Red/Green/Blue: The adjustment range is -50
to +50.
- Applytoallinputs: The values of the Colour
Temperature is applied to all the input modes.
Colour
Management
System
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow
colours. Allows an expert to adjust the tint using a
test pattern. Six colours (Red/Green/Blue/Cyan/
Magenta/Yellow) can be selectively adjusted without
affecting other colours. You may not see colours
change on a normal picture even after adjustment.
- SaturationRed/Green/Blue/Cyan/Magenta/
Yellow,TintRed/Green/Blue/Cyan/Magenta/
Yellow,LuminanceRed/Green/Blue/Cyan/
Magenta/Yellow:
The adjustment range is -30 to +30 each.
* Depending on input signal or other picture settings, the range of detailed
items for adjustment may differ.