0323E_cover-en_rev00 7/3/06 9:33 AM Page 1 LCD TV PLASMA TV OWNER'S MANUAL LCD TV MODELS PLASMA TV MODELS 26LC2R 27LC2R * 32LC2R * 32LC3R * 42PC1RV * 42PC3RV * 42PC3RA * * Please read Information Manual included before reading this manual and operating together your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover this information to your dealer when you P/NO : and quote require 38289U0323E service.
0323E_en_1-rev00 7/3/06 7:59 AM Page 2
0323E_en_1-rev00 7/3/06 7:59 AM Page 1 ACCESSORIES Ensure that the dealer where following accessories are included you purchased the product. with your TV. If accessory is an contact the missing, please ACESORI I NP U T T V NP UT I P O W A R C T EX T R E R TV P IP P DV D PI P - P IP P R + V C R SI ZE P O P IP ST ION IN P E XT I U T LI ST M EN U I / I I O K Owner's S LE EP V O L Q .
0323E_en_1-rev00 7/3/06 7:59 AM Page 2 CONTENTS ACCESSORIES...........................................1 On Screen Menus Selection and INTRODUCTION CONTE S TVMENU Controls/ConnectionOptions..........................4-9 RemoteControlKeyFunctions.........................10-11 InstallingBatteries..........................11 INSTALLATION StandInstallation............................................12-13 Setting Adjustment . . . .34 . up TV stations Autoprogrammetuning.........................
0323E_en_1-rev00 7/3/06 7:59 AM Page 3 TVMENU Screen Menu Options .64 AutoConfigure(RGB[PC]modeonly). ManualConfigure........................................65 . . . . . . . . . . SettingthePictureFormat......................66-67 SelectingWideVGA/XGAmode...................67 Initializing (Resettooriginalfactorysettings). . . . . . . . . . . . . . . CONTE S .68 APPENDIX ProgrammingtheRemote.................................69 Programmingcode..............................
7/3/06 0323E_en_1-rev00 7:59 AM Page 4 INTRODUCTION CONTROLS This is the front This is INTRODUC a panel of models 42PC1RV * TVs. simplified representation of the front panel. Here shown may be somewhat different from your TV. Front Panel Controls Power/Standby Indicator ? illuminates red in ? illuminates white when the set is switched standby mode. on.
/3/06 0323E_en_1-rev00 This is the front This is a 7:59 panel AM Page 5 of models 42PC3RV * 42PC3RA * TVs. , simplified representation of the front panel. Here shown may be somewhat different from your TV. Front Panel Controls PROGRAMME Buttons INTRODUC VOLUME Buttons OK Button MENU Button INPUT Button ON/OFF Button Remote Control Sensor Power/Standby Indicator ? illuminates red in ? illuminates white when the set is switched standby mode. on.
0323E_en_1-rev00 7/3/06 7:59 AM 6 Page INTRODUCTION CONNECTION OPTION This is the back of models 42PC1RV * 42PC3RV * 42PC3RA * TVs. panel , , Back Connection Panel 42PC1RV * INTRODUC only AUDIO Input Connections are available for listening an external device. AUDIO stereo sound from VIDEO VIDEO Input Connects the video device.
7/3/06 7:59 This is the front panel 0323E_en_1-rev00 This is a AM 7 Page of models 26LC2R * 27LC2R * 32LC2R * 32LC3R * TVs. , simplified representation of the front , panel. , Here shown may be somewhat different from your TV. Front Panel Controls 26LC2R * 27LC2R * 32LC2R * , , INTRODUC R PROGRAMME Buttons PR Remote Control Sensor VOL Power/Standby VOLUME Buttons Indicator ? illuminates red in ? illuminates white when the set is switched standby mode. on.
0323E_en_1-rev00 7/3/06 7:59 AM 8 Page CONTROLS This is the back of models 26LC2R * 27LC2R * TVs. panel , Back Connection Panel AUDIO INTRODUC Input Connections available for listening an external device. AUDIO VIDEO VIDEO Input Connects the video device.
7/3/06 0323E_en_1-rev00 This is the back 7:59 AM 9 Page of models 32LC2R * 32LC3R * TVs. panel , Back Connection Panel 32LC2R * 32LC3R * AUDIO MON AUDO AUDIO VIDEO Input Connections are available for listening an external device. stereo sound from V DEO VIDEO Input Connects the video AC IN signal video device.
7/3/06 0323E_en_1-rev00 7:59 AM Page 10 INTRODUCTION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control POWER sensor on the TV. Switches the set on from INPUT TV POWER TV INPUT INTRODUC ARC VCR PIP PR- SIZE INPUT POSTION PIP PR+ Returns to the TV Switches the set DVD PIP viewing on from (TV, AV1 , ARC I/II SLEEP OK POSITION PR PIP INPUT 456 789 * 0 TIME REVEAL , input AV4 , picture format.
7/3/06 0323E_en_1-rev00 7:59 AM Page 11 MODE Selects the remote operating modes. INPUT TV 1 TV POWER INPUT TELETEXT These buttons BUTTONS For further DVD ARC details, used for teletext. see the 'Teletext' section. VCR TEXT PIP PR- are PIP SIZE POSTION PIP PR+ 1 THUMBSTICK (Up/Down/Left Right) PIP INPUT OK VOLUME UP /DOWN LIST MENU EXIT Allows you to navigate the on-screen menus and the system settings to your preference.
7/3/06 0323E_en_1-rev00 7:59 AM Page 12 INSTALLATION STAND INSTALLATION This feature is not available for all models. 1 2 A INSTAL O 4 3 B C Place the set with the screen facing down on a cushion or soft cloth as shown in Figures 1. Before unfolding the stand,please make sure two locks (A)on the bottom of the stand push outward. Pull the stand out as shown above in Figures 2 3.
0323E_en_1-rev00 7/3/06 7:59 AM Page 13 STAND INSTALLATION (Only 32LC2R ) * Carefully place the product screen side down cushioned surface that will protect and screen from damage. a Place the stand product on the on product product as shown. Install the 4 bolts product securely, in provided.
0323E_en_1-rev00 7/3/06 7:59 AM Page 14 INSTALLATION BASIC CONNECTION (42PC1RV * , 42PC3RV * 42PC3RA * ) These models have two cable arrangement methods Stand Arrange INSTAL O Stand 1 type as shown to the stand type. picture. 2 Hold the CABLE hands and according 1 the cables type , push it MANAGEMENT with both as shown. CABLE MANAGEMENT 2 Connect the cables as necessary. To connect an additional equipment, see the External equipmentConnections section.
7/3/06 0323E_en_1-rev00 7:59 AM Page 15 BASIC CONNECTION (Only 26LC2R * , 27LC2R * 32LC2R * 32LC3R * ) , , Connect the cables as necessary. After connecting the cables neatly, arrange the cables to the Cable Holder. 1 To connect an additional equipment, see the External equipment Connections section. Install the CABLE MANAGEMENT 2 as INSTAL O shown. CABLE MANAGEMENT Bundle the cables 3 using the supplied twister holder.
0323E_en_1-rev00 7/3/06 7:59 AM Page 16 INSTALLATION The TV can The TV is be installed in various ways such designed to be mounted as on a wall, or on a desktop etc. horizontally. GROUNDING Power Ensure that you connect the earth possible electric shock. If sible, have a qualified wire to ground grounding methods electrician install a are prevent not pos- separate circuit breaker. Do not try to ground the unit by connecting wires, telephone lightening rods, or gas pipes.
7/3/06 0323E_en_1-rev00 HOW TO 7:59 AM JOIN Page 17 THE PRODUCT ASSEMBLY TO THE WALL TO PROTECT THE SET TUMBLING Set it up close to the wall so the product doesn't fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn't fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people.
7/3/06 0323E_en_1-rev00 7:59 AM Page 18 CONNECTIONS & SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION For optimum picture quality, adjust An antenna cable and converter are antenna direction. not supplied.
7/3/06 0323E_en_1-rev00 7:59 AM Page 19 VCR SETUP To avoid picture Typically a of the frozen still leave (interference), picture from may remain visible screen When noise connecting with adequate VCR. If the 4:3 a on an the an distance between the VCR and TV. picture format is used; the fixed images antenna Connect the ANT OUT socket of the VCR to the 1 ANTENNA IN socket on the sides on screen. 2 VCR the set.
7/3/06 0323E_en_1-rev00 7:59 AM Page 20 CONNECTIONS & SETUP VCR SETUP When with connecting a Euro Scart V1 V2 Connect the Euro scart socket of the VCR to the A V 1 1 Euro scart socket on COMPONENT IN the set. VIDEO video tape into the VCR and press PLAY VCR. (Refer to the VCR owner's manual.) Insert 2 a on AUDIO AVIN3 the MONO () S-VIDEO VIDEO AUDIO 1 Select AV1 3 input source with using the INPUT button on the remote control.
0323E_en_1-rev00 7/3/06 7:59 AM Page 21 EXTERNAL EQUIPMENT CONNECTIONS 1 Connect the AUDIO / VIDEO and external (Video red) = equipment. yellow, Audio Left jacks Match = the between TV jack VN4 colors white, and Audio Right AUDIO = MONO VIDEO 2 Select AV4 button on input source with the remote control. using the INPUT (except 42PC3RV , 42PC3RA * ) - If connected to AV IN3 input, select AV 3 1 * Camcorder input source.
7/3/06 0323E_en_1-rev00 7:59 AM 22 Page CONNECTIONS & SETUP DVD SETUP When connecting Connect the video 1 with Connect the audio 3 jacks outputs of the NENT IN AUDIO Turn the DVD on component cable outputs (Y, PB, PR) of the COMPONENT IN VIDEO 2 a jacks player, on on DVD DVD B (R) R to the 1 2 DVD to the COMPOAV1 AV2 the set. insert CONETIS&UP Select Component input button on a DVD. AVIN3 MONO () source with using AUDIO the INPUT the remote control.
7/3/06 0323E_en_1-rev00 When 7:59 AM input on a S-Video cable output of the DVD to the S-VIDEO input jacks on outputs of the DVD to the AUDIO (R) DVD the set. Connect the audio 2 23 connecting with Connect the S-VIDEO 1 Page the set. AV1 AUDIO AV2 (L) 2 S-VIDEO 1 COMPONENT IN the DVD 3 Turn 4 Select AV 3 on player, insert a VIDEO DVD. AUDIO MONO input source with using the INPUT button on the remote control.
7/3/06 0323E_en_1-rev00 7:59 AM Page 24 CONNECTIONS & SETUP STB SETUP (SET-TOP BOX) When connecting with a component cable Digital Connect the video 1 outputs (Y, PB, PR) to the COMPONENT Connect the audio 2 IN VIDEO of the jacks on digital jacks on Turn 4 Select the digital set-top digital set-top box.) the on box.
7/3/06 0323E_en_1-rev00 When 7:59 Page 25 connecting with Connect the RGB 1 AM RGB IN D-sub 15 a output of the digital set-top box (PC DTV) jack on AUDIO IN Digital to the (R) AUDIO (L) RGB-DTV OUTPUT Set-top the set. Connect the audio 2 pin cable outputs of the set-top box (RGB) jack on the set. to the 1 2 3 Turn on the digital set-top box. (Refer digital set-top box.
7/3/06 0323E_en_1-rev00 7:59 AM 26 Page CONNECTIONS & SETUP PC SETUP This TV provides Plug When and connecting Play capability, meaning with a D-sub 15 that the PC to the TV's adjusts automatically settings. pin cable PC 1 Connect the PC audio 2 CONETIS&UP putput to the TV's AUDIO IN (RGB) input. Turn 4 Select RGB ton on 2 [PC] input source with using the I N P U T but- REMOTE CONTROL IN AUDIO IN (RGB) UDIO OUT the remote control.
7/3/06 0323E_en_1-rev00 7:59 Supported Display (26LC2R / * AM Page Resolution 27 (RGB[PC] mode) 32LC2R / 27LC2R / 32LC3R / 42PC3RA * * * Supported Display * ) (42PC1RV * Resolution (RGB[PC] mode) / 42PC3RV * ) Horizontal Vertical Frequency(KHz) Frequency(Hz) Resolution 640x350 31.5 70.8 720x400 31.5 70.8 640x480 31.5 800x600 Horizontal Vertical Frequency(KHz) Frequency(Hz) 640x350 31.5 70.8 720x400 31.5 70.8 59.9 640x480 31.5 59.9 37.9 60.3 848x480 31.
7/3/06 0323E_en_1-rev00 7:59 AM 28 Page CONNECTIONS & SETUP TURNING THE TV ON INPUT TV If your TV will be turned on, you will be able to use its features. TV POWER INPUT DVD ARC VCR TEXT Turning on the TV PIP PR- First, connect power cord correctly. At this moment, the TV switches to 1 standby SIZE POSTION PIP INPUT mode.
7/3/06 0323E_en_1-rev00 7:59 AM On-Screen Menu Installation 1 guide menu Language / Country appears Press the DE 29 Page on TV screen Selection when it is turned on for the first time. F G button and then, OK button to select your desired F G button and then, OK button to select your country. language. Press the DE 2 If you 1 want to change Language Country Press the MENU button and then Special menus can 3 DE button to select the menu.
0323E_en_1-rev00 7/3/06 7:59 AM Page 30 SPECIAL FUNCTIONS PIP (Picture-In-Picture) INPUT TV TV POWER INPUT DVD PIP lets you view 2 different One source will be large, inputs (sources) and the other your TV on source will show screen at the same time. ARC a smaller inset TEXT PIP PR- PIP function is available in the adjust 480i/576i Watching resolution Component, RGB, of Component mode.) HDMI mode.
0323E_en_1-rev00 7/3/06 7:59 AM Page 31 TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
7/3/06 0323E_en_1-rev00 7:59 AM Page 32 SPECIAL FUNCTIONS TELETEXT TOP Text The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block group With the blue button you Use the yellow button to With the green button you Alternatively Direct can page Corresponding permits progress from block to block.
7/3/06 0323E_en_1-rev00 7:59 AM 33 Page Teletext Functions Special ? A REVEAL Press this button to Press this button A display concealed information, such as solutions again to remove the information from the display. of riddles or puzzles. SIZE Selects double height text. enlarge the top half of the page. button again to enlarge the bottom half of the button again to return to the normal display. Press this button to Press this Press this A page.
7/3/06 0323E_en_2-rev00 8:02 AM 34 Page TV MENU ON SCREEN MENUS SELECTION AND Your TV's OSD The OSD ( On mainly Display ) Screen use pictures may differ from what is shown in this manual. slightly for the 42PC1RV * 42PC3RV * 42PC3RA * , , 1 Press the MENU button and then D / E button to 2 Press the G button and then D / E button to select 3 Change You the setting can move of to the ADJUSTMENT an item in the sub higher level menu display a menu each . menu. item.
7/3/06 0323E_en_2-rev00 8:02 AM Page 35 Setting up TV stations AUTO PROGRAMME TUNING TEXT PIP PIP PR- Up to 100 TV stations can be stored can be tuned using POSTION PIP INPUT by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the PR +/or NUMBER buttons to scan the stations you have programmed. Stations SIZE PIP PR+ automatic or LIST MENU I/II EXIT SLEEP manual modes. OK All stations that can be received are stored by this method.
0323E_en_2-rev00 7/3/06 8:02 AM 36 Page TV MENU Setting up TV stations MANUAL PROGRAMME TUNING TEXT PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT Manual programme lets you manually tune and arrange the stations in whatever order you desire. LIST MENU I/II EXIT SLEEP OK 1 Press the M E N U button and then DE button to select the Station 2 menu. Q.VIEW VOL Press the G button and then DE button to select Manual PR MUTE 123 programme.
7/3/06 0323E_en_2-rev00 8:02 AM Page 37 FINE TUNING ARC Normally fine tuning is only necessary if reception is poor. VCR TEXT PIP PR- PIP SIZE POSTION PIP PR+ LIST PIP INPUT I/II MENU EXIT SLEEP OK 1 Press the M E NU button and then DE button to select the Station menu. Q.VIEW VOL 2 Press the G button and then DE button to select Manual PR MUTE programme. 123 45 3 4 Press the G button and then DE button to select Fine.
0323E_en_2-rev00 7/3/06 8:02 AM TV MENU Page 38 Setting up TV stations ASSIGNING A STATION NAME ARC You can assign a station name with five characters to each programme number. VCR TEXT PIP PIP PR- SIZE POSTION PIP PR+ LIST PIP INPUT MENU I/II EXIT SLEEP OK 1 Press the MEN U button and then DE button to select the Station menu. Q.VIEW VOL 2 MUTE programme.
7/3/06 0323E_en_2-rev00 8:02 AM Page 39 PROGRAMME EDIT ARC This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. VCR TEXT PIP PR- PIP SIZE POSTION PIP PR+ LIST PIP INPUT I/II MENU EXIT SLEEP OK Q.VIEW 1 VOL Press the M E NU button and then DE button to select the Station PR menu.
0323E_en_2-rev00 7/3/06 8:02 AM Page TV MENU 40 Setting up TV stations FAVOURITE PROGRAMME This function lets you select your favourite programmes directly. LIST MENU I/II EXIT Repeatedly press the SLEEP FAV button to select stored favourite programmes. OK Q.VIEW VOL 1 PR Press the M E N U button and then DE button to select MUTE the Station menu. 123 456 2 Press the G button and then DE button to select 789 Favourite programme. * 10 FAV ? 3 Press the G button.
7/3/06 0323E_en_2-rev00 8:02 AM Page 41 CALLING THE PROGRAMME TABLE TEXT check the programmes stored in the memory the programme table. You can by displaying PIP PR- PIP SIZE POSTION PIP PR+ LIST MENU PIP INPUT I/II EXIT SLEEP OK A Displaying programme table Press the LIST button to display the Programme The programme table appears on the table Q.VIEW menu. VOL PR screen. MUTE One programme table contains ten programmes as shown. 123 456 ! a.
0323E_en_2-rev00 7/3/06 8:02 AM Page Picture Menu TV MENU PSM 42 Status (Picture Dynamic Select this Standard The most Mild Select this option Select this option User 1/2 option to Memory) display with and natural general to to a screen with display PIP PIP PR- SIZE POSTION PIP PR+ PIP INPUT status. image. the user-defined setting. a TEXT sharp image. mild display use Options LIST I/II MENU EXIT SLEEP OK Q.
0323E_en_2-rev00 7/3/06 Picture 8:02 AM Page 43 Adjustment (PSM-User option) Contrast Adjusts the difference between the light and dark levels in the picture. Bri Increases gh t n e s s or PIP SIZE POSTION PIP PR+ PIP INPUT decreases amount of white in the your picture. Colour Adjusts intensity Sharpness Adjusts the of all colours. level of crispness in the dark areas of the edges between the light and LIST I/II MENU EXIT picture.
0323E_en_2-rev00 7/3/06 8:02 AM Page TV MENU CSM 44 Picture Menu (Colour To initialize values (reset Status to default Options Memory) settings), select the No r m TEXT al PIP PIP PR- SIZE POSTION PIP PR+ PIP INPUT option. Choose one of three automatic colour enhance hotter colours such intense colours with more as red, adjustments. or Set to set to cool to warm see to less LIST blue. MENU EXIT I/II SLEEP OK Q.
0323E_en_2-rev00 7/3/06 8:02 AM Manual Colour (CSM - User Page 45 Temperature Control option) TEXT PIP PIP PR- To adjust red, green, blue to any colour temperature you SIZE POSTION PIP PR+ PIP INPUT prefer. LIST MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 123 1 Press the M E N U button and then DE button to select the Picture Picture menu. PSM CSM 2 Press the G button and then DE button to select CSM. 3 Press the G button and then DE button to select User.
7/3/06 0323E_en_2-rev00 8:02 AM 46 Page TV MENU Picture Menu Options FUNCTION TEXT XD is LG electronic's real HD source PIP PR- unique picture improving technology to display a through an advanced digital signal processing algo- PIP SIZE POSTION PIP PR+ PIP INPUT rithm. It's not available to LIST this function in RGB-PC mode. use MENU EXIT I/II SLEEP OK Press the MENU button and then DE button to select 1 the Picture menu. Q.
7/3/06 0323E_en_2-rev00 8:02 AM Page 47 ADVANCED-CINEMA TEXT Set up the TV for the best picture appearance for PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT viewing movies. This feature operates only in Analog TV, AV, S-Video and LIST Component 480i/576i mode. MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 123 Picture 1 Press the M E N U button and then DE button to select PSM CSM the Picture menu. Advanced Reset 2 Press the G button and then DE button to select Advanced.
7/3/06 0323E_en_2-rev00 8:02 AM Page 48 ADVANCED-BLACK LEVEL TEXT When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the This function works in the Video (NTSC-M) or mode: AV following PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT screen. (NTSC-M), S- LIST MENU EXIT HDMI. I/II SLEEP OK 1 Press the MENU button and then DE button to select the Picture Q.
0323E_en_2-rev00 7/3/06 8:02 AM Page 49 RESET TEXT PIP PR- PIP SIZE LIST MENU EXIT 1 2 PIP INPUT I/II SLEEP Press the MENU button and then DE button to select the Picture POSTION PIP PR+ OK menu. Press the G button and then DE button to select Reset. Q.VIEW VOL PR MUTE 3 Press the G button to initialize the ? Returns to the default at the adjusted 123 value. settings PSM, CSM, XD, 456 Advanced Picture factory.
7/3/06 0323E_en_2-rev00 8:02 AM TV MENU SSM 50 Page Sound Menu (Sound Status Options Memory) TEXT You can select your Music, Movie quency of the preferred setting; Surround MAX, Flat, and can also Sports you adjust the sound fre- or PIP PIP PR- sound SIZE POSTION PIP PR+ PIP INPUT equalizer. SSM lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the LIST MENU EXIT I/II SLEEP programme content.
0323E_en_2-rev00 7/3/06 Sound (SSM Adjust 8:02 AM Page 51 Frequency Adjustment User - the sound option) TEXT PIP PIP PR- SIZE POSTION PIP PR+ PIP INPUT equalizer. LIST MENU I/II EXIT SLEEP OK 1 Press the M E N U button and then DE button to select Q.VIEW VOL the Sound PR menu. MUTE 2 Press the G button and then DE button to select SSM. 3 Press the G button and then DE button to select User. Sound SSM AVL Balance 0 Speaker 4 Press the G button.
0323E_en_2-rev00 7/3/06 8:02 AM Page TV MENU AVL 52 Sound Menu (Auto Volume Options Leveler) TEXT AVL automatically keeps change programmes. on an equal volume level even if you PIP PR- PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK 1 Press the MENU button and then DE button to select the Sound Q.VIEW menu. VOL PR Sound 2 Press the G button and then DE button to select AVL .
0323E_en_2-rev00 7/3/06 8:02 BALANCE AM Page 53 ADJUSTMENT TEXT You can adjust the sound balance of speaker to the levels you PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT prefer. LIST MENU EXIT I/II SLEEP OK Q.VIEW VOL 1 PR Press the M E N U button and then DE button to select the Sound Sound menu. SSM AVL 2 Press the G button and then DE button to select Balance. Balance 0 Speaker 3 Press the desired 4 G button and then F G button to make adjustment.
0323E_en_2-rev00 7/3/06 8:02 AM Page TV MENU 54 Sound Menu Options SPEAKER You can adjust the internal In AV, COMPONENT, RGB[PC], RGB[DTV] nal be speaker signal. audio can TEXT speaker status. outputted even PIP PR- PIP SIZE PIP INPUT and HDMI mode, inter- though there is no video LIST MENU EXIT If you want to internal POSTION PIP PR+ I/II SLEEP your external hi-fi stereo system, turn off the of the set.
0323E_en_2-rev00 7/3/06 8:02 AM 55 Page STEREO/DUAL RECEPTION INPUT TV TV POWER INPUT DVD When a programme is selected, the sound information for the station appears after the programme number and station name disappear. ARC PIP PR- DUAL I Sends the DUAL II Sends the DUAL I+II Sends primary broadcast language to PIP broadcast language POSTION PIP PR+ LIST secondary loudspeakers. SIZE PIP INPUT the loud- speakers.
0323E_en_2-rev00 7/3/06 8:02 AM 56 Page TV MENU Sound Menu Options NICAM RECEPTION If the set is equipped with the receiver for NICAM reception, Instantaneous Companding Audio Multiplex) digital sound can be Sound output can the I/II button be selected according to the high quality NICAM (Near received. type of received broadcast as follows by pressing repeatedly.
0323E_en_2-rev00 7/3/06 8:02 AM Page TV MENU 57 Time Menu Options CLOCK SETUP TEXT You must set the time correctly before If current time is erased by unplugged, setting a using power failure or PIP PIP PR- on/off time function. SIZE POSTION PIP PR+ PIP INPUT the set is reset the clock. LIST MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 1 123 Press the MENU button and then D / E button to 456 select the Time menu.
0323E_en_2-rev00 7/3/06 8:02 AM 58 Page TV MENU Time Menu Options ON/OFF TIME TEXT The Off time preset automatically switches the set to at the standby SIZE POSTION PIP PR+ PIP INPUT time. Two hours after the set is switched time function it will unless has PIP PIP PR- automatically switch been pressed. back to on by the on standby mode a LIST button MENU EXIT I/II SLEEP OK Once the on time/off time is set, these functions operate daily at the preset time. Q.
0323E_en_2-rev00 7/3/06 8:02 AM Page 59 AUTO SLEEP If set to ically on and there is no input signal, the TV turns off automat- after 10 minutes. Time Clock Off time On time Auto sleep Press the M E N U button and then D / E button to select 1 the Time DE menu. FG OK MENU 1 2 Press the G button and then D / E button to select Auto sleep. Time Clock Off time Press the G button and then D / E button to select On 3 or Off..
7/3/06 0323E_en_2-rev00 8:02 AM Page TV MENU 60 Special Menu Options CHILD LOCK TEXT This set is set to to remember which if you turn the set off. programmed even option it was PIP PIP PR- The TV can be set so that the remote control is needed to trol it. This feature can be used to prevent unauthorized viewing. SIZE POSTION PIP PR+ PIP INPUT con- last LIST MENU I/II EXIT SLEEP OK Q.
7/3/06 0323E_en_2-rev00 ISM 8:02 AM Page 61 (Image Sticking Minimization) A frozen of still PC/video game displayed on the prolonged periods ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time.
0323E_en_2-rev00 7/3/06 8:02 AM Page TV MENU 62 Special Menu Options LOW POWER TEXT This is the function to reduce the power It's not available to 32LC2R * , 32LC3R * use consumption of the set. this function in 26LC2R * 27LC2R * , PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT , models. LIST MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 123 456 1 Press the M E N U button and then D / E button to select the Special Special menu.
7/3/06 0323E_en_2-rev00 8:02 AM Page 63 XD DEMO Use it to see TEXT PIP PIP PR- the difference between XD Demo on SIZE PIP INPUT and XD Demo off. LIST I/II MENU EXIT It's not available to use this function in RGB[PC] POSTION PIP PR+ SLEEP mode. OK Q.VIEW 1 Press the MENU button and then select the use VOL D / E button to PR MUTE Special menu. 123 456 2 Press the G button and then XD use D/E button to select Special Demo.
0323E_en_2-rev00 7/3/06 8:02 AM TV MENU 64 Page Screen Menu AUTO CONFIGURE Options (RGB [PC] mode only) TEXT PIP PR- Automatically adjusts picture position shaking. and minimizes PIP SIZE POSTION PIP PR+ PIP INPUT image After adjustment, if the image is still not correct, your functioning properly but needs further adjustment. set is LIST MENU EXIT I/II SLEEP OK Auto configure Q.VIEW VOL adjustment of the screen posiand The tion, clock, phase.
7/3/06 0323E_en_2-rev00 8:02 AM 65 Page MANUAL CONFIGURE TEXT If the picture if characters isn't clear after auto are still adjustment and especially trembling, adjust the picture phase PIP PIP PR- SIZE POSTION PIP PR+ PIP INPUT manually. LIST To correct the screen adjust size, This function works in the Cl following o c k. mode : COMPONENT I/II SLEEP RGB[PC], (480p/576p/720p/1080i), (480p/576p/720p/1080i). RGB[DTV], MENU EXIT OK HDMI Q.
7/3/06 0323E_en_2-rev00 8:02 AM 66 Page SETTING THE PICTURE FORMAT You watch the can in various screen Original, 4:3, 16:9, picture formats; Spectacle 14:9 and Zo , Full INPUT , TV TV POWER INPUT om. DVD ARC If a fixed displayed on the screen for a long time, that fixed become imprinted on the screen and remain visible. image image may There might VCR is be uncomfortable in full mode. Then change TEXT PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT into other mode.
7/3/06 0323E_en_2-rev00 8:02 AM 67 Page Zoom1 ? selection will lead you to view the picture without any alternation, while filling the entire screen. However, the top and ! bottom G Following portions of the picture will be cropped. You only select 4:3 16:9 Component, RGB, mode only. can (Wide) HDMI Zoom2 ? NOTE , in Choose Zoom2 when you want the picture to be altered, both horizontally extended and vertically cropped.
0323E_en_2-rev00 7/3/06 8:02 AM Page TV MENU 68 Screen Menu Options INITIALIZING (RESET TO ORIGINAL FACTORY SETTINGS) TEXT PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT This function operates in current mode. To initialize the adjusted value LIST MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then DE button to select the Screen Q.VIEW VOL PR menu. MUTE 123 2 3 Press the G button and then DE button to select 456 Reset. 789 Screen Press the G button. config.
0323E_en_2-rev00 7/3/06 8:02 AM 69 Page APPENDIX PROGRAMMING THE REMOTE The remote is a multi-brand or a universal remote. It can be programmed to most remote-con- operate trollable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a 1 code into a remote mode Test your remote control.
7/3/06 0323E_en_2-rev00 8:02 AM Page 70 APPENDIX VCRs Brand Codes AIWA 034 AKAI 016 043 125 146 046 Brand Codes MAGNAVOX 031 033 067 068 012 031 124 MARANTZ ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 MARTA 101 MATSUI 027 030 040 102 104 105 107 109 112 113 115 120 122 022 043 048 135 SANYO003 007 010 014 SANSUI 035 037 129 MEI 031 033 028 031 033 MEMOREX 003 010 014 031 CAPEHART 108 033 034 053 072 CRAIG 003 040 135 13
7/3/06 0323E_en_2-rev00 8:02 AM Page 71 TROUBLESHOOTING CHECKLIST The does operation not work normally. Check to causing The control remote doesn't Power is work if there is any off Install new Is the sleep operating Check the power control picture on ly No or poor slowon color picture poor Power product is turned problem bars or Poor on.
7/3/06 0323E_en_2-rev00 8:02 AM Page 72 APPENDIX TROUBLESHOOTING CHECKLIST The audio function does not work. Press the VOL+ Picture OK No - (or Volume) button. Sound muted? Press M U T E button. & Try sound another channel. The problem Are the audio cables installed from No output of the one speakers Adjust A Unusual sound from inside the There is The product problem a is signal in PC mode. Vertical bar APENDIX stripe ground & Noise & product option.
0323E_en_2-rev00 7/3/06 8:02 AM Page 73 MAINTENANCE Early malfunctions have your new Cleaning the 1 Here's a 2 it to Make a the Cleaning the To dirt remove Please be sure prevented. Careful and regular cleaning can extend the amount of time you will unplug the power cord before you begin any cleaning. to turn the power off and way to keep the dust off your little fabric softener wipe sure be sure Screen great water and use can TV.
0323E_en_2-rev00 7/3/06 8:02 AM 74 Page APPENDIX PRODUCT SPECIFICATIONS MODELS 681.0 with stand 26.8 Dimensions (Width x Height x x x 26LC2R * 27LC2R * 26LC2R-ZJ 26LC2RB-ZJ 26LC2RA-ZJ 27LC2R-ZJ 542.0 21.3 Weight 681.0 x mm 686.0 x 27.0 21.7 x 550.0 x 235.0 mm 9.3 inches x 686.0 x 27.0 x 19.4 40.8 lbs 14.5 33.5 lbs 11.4 kg / 32.0 kg / 25.1 490.8 26.8 x with stand 18.5 without stand 15.2 kg / kg / 19.3 x x 119.0 mm 4.6 inches 493.5 x x 119.
7/3/06 0323E_en_2-rev00 8:02 AM Page 75 MODELS 811.0 with stand 31.9 Dimensions (Width x Height x x 32LC2R * 32LC3R * 32LC2R-ZJ 32LC2RB-ZJ 32LC2RA-ZJ 32LC3R-ZJ 630.0 24.8 x x x 235.0 923.0 mm 9.3 inches 36.4 x x 577.0 22.7 x x 255.0 mm 10.0 inches Depth) 811.0 without stand Weight x 566.8 x x with stand 21.9 without stand 18.5 kg / 48.2 kg / 40.8 22.3 x 123.5 923.0 mm 4.9 inches 31.9 36.4 lbs 19.8 lbs 17.9 x x 522.0 20.6 x x 124.0 mm 4.
0323E_en_2-rev00 7/3/06 8:02 AM Page 76 APPENDIX 42PC3RV * , 42PC3RA * 42PC1RV * MODELS 42PC1RV-ZJ 42PC1RVA-ZJ including stand Dimensions (Width x Height x 29.5 x 748.5 x stand including stand excluding stand Weight requirement Power Consumption 1129.0 x 44.4 27.4 x 695.0 x 748.5 x x 333.6 mm 13.1 inches x 103.7 1129.0 x 44.4 x 27.4 mm 4.1 inches 695.0 x x 103.7 mm 4.1 inches kg / 61.1 lbs 31.5 kg / 69.4 lbs 24.2 kg / 53.4 lbs 24.2 kg / 53.
7/3/06 0323E_en_3-rev00 10:30 AM Page 77 APPENDIX EXTERNAL CONTROL DEVICE SETUP Connect the RS-232C system) input jack to an and control the TV's functions Connect the serial nection cables RS-232C REMOTE CONTRO are external control device (such as a computer or an A/V control externally. port of the control device to the RS-232C not supplied with the TV. jack on the TV back panel.RS-232C con- Setup UDIO IN (RGB) RS-232C IN CONTRO SERV CE) Type of Connector; No.
7/3/06 0323E_en_3-rev00 8:03 AM 78 Page APPENDIX RS-232C Configurations Configurations ( Standard 7-Wire RS-232C cable ) PC TV SET RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DSR DSR 3-Wire Configurations ( Not standard ) PC TV SET RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DTR 6 4 DTR DSR 6 4 DSR RTS7 8 CTS RTS7 7 RTS CTS8 7 RTS CTS8 8 CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID - Use this function to - Refer to 'Real Data speci
7/3/06 0323E_en_3-rev00 8:03 AM Page 79 Command Reference List COMMAND1 COMMAND2 k 01. Power DATA COMMAND1 (Hexadecimal) 0~1 a * 15. Balance DATA (Hexadecimal) 0~64 t Ratio k c 03. Screen Mute k d 0~1 17. Red 04. Volume Mute k e 0~1 18. Green 05. Volume Control k f 0~64 19. Blue 06. Contrast k g 0~64 20 Abnormal Status 07. k h 0~64 21. ISM Method j p 08. Colour k i 0~64 22. Low Power j q 09. Tint k j 0~64 23. Orbiter Time Setting j r 1~FE 10.
7/3/06 0323E_en_3-rev00 8:03 AM 80 Page APPENDIX 01. Power 05. (Command2:a) To control Power On/Off of the TV. Transmission Volume To adjust You [k][a][ ][Set ID][ ][Data][Cr] Power Off : Data 1 : can Power On volume. also Transmission Acknowledgement [a][ ][Set ID][ ][OK][Data][x] volume with the volume buttons adjust [k][f][ ][Set ID][ ][Data][Cr] DataMin:0~Max:64 To show Power On/Off. Transmission (Command2:f) remote control.
7/3/06 0323E_en_3-rev00 10. 8:03 AM Page 81 15. Balance Sharpness (Command2:k) To adjust You can the also screen sharpness. adjust sharpness Transmission To in the PICTURE menu. [k][k][ ][Set ID][ ][Data][Cr] 1'. See page 82. mapping Transmission 16. Color Screen (On trolling remotely. Display) on/off when con- [k][l][ ][Set ID][ ][Data][Cr] Control Lock Mode Transmission To panel on/off, 13. PIP DW Data 1: Lock using ton can on the TV, on use panel this mode.
7/3/06 0323E_en_3-rev00 8:03 AM 82 Page APPENDIX 20. Abnormal State To recognize 24 (Command2:z) an . abnormal state. Orbiter Pix el Setting To adjust pixel (Command1:j, Command2:s) number in orbiter function. This feature is not available for all models. This feature is not available for all models.
7/3/06 0323E_en_3-rev00 27. 8:03 AM 83 Page Key (Command1:m, Command2:c) To send IR remote Transmission Data: - select Input code. To [m][c][ ][Set ID][ ][Data][Cr] code Key key 29. (Command1:x adjust input Transmission Refer to page 85 source , Command2:y) for sub picture in PIP mode [x][y][ ][Set ID][ ][Data][Cr] Data: Structure Acknowledgement [c][ ][Set ID][ ][OK][Data][x] MSB LSB 00000000 28.
0323E_en_3-rev00 7/3/06 8:03 AM 84 Page APPENDIX IR CODES 1. How to Connect Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes Output waveform modulated with 37.
0323E_en_3-rev00 7/3/06 8:03 AM Page 85 REMOTE CONTROL IR CODES Code (Hexa) Function Code Note (Hexa) Function Note 0F TV R/C Button 71 GREEN R/C Button 0B INPUT R/C Button 63 YELLOW R/C Button 08 POWER R/C Button 61 BLUE R/C Button C4 POWER ON Discrete IR Code (Only On) 02 VOL + R/C Button C5 POWER OFF Discrete IR Code (Only Power OFF) 03 VOL R/C Button 60 PIP R/C Button 00 PR+ R/C Button 0E SLEEP R/C Button 01 PR- R/C Button 20 TEXT R/C Button