7/20/06 0323G_1-en_rev06 8:53 AM Page 1 LCD TV PLASMA TV OWNER'S MANUAL LCD TV MODELS PLASMA TV MODELS 26LC2R 32LC2R * 42PC1RV * 42PC3RV * * Please read Information Manual included before reading this manual and operating together your Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you P/NO This figure is the logo of 26LC2R-TJ, 32LC2R-TJ for Australia.
0323G_1-en_rev04 6/5/06 3:34 PM Page 2
0323G_1-en_rev04 6/5/06 3:34 PM 1 Page ACCESSORIES Ensure that the dealer where following accessories are included you purchased the product. with your TV. If an accessory is missing, please contact the ACESORI I NP U T TV NP UT I P O W A R C E R T E PI TV XT PP R DV D PI P - P IP P R + V C R SI ZE P O P IP ST ION IN P E XT I UT LI ST M EN U I/ I I OK Owner's SL E E P V O L Q.
0323G_1-en_rev04 6/5/06 3:34 PM Page 2 CONTENTS ACCESSORIES...........................................1 On Screen Menus Selection and INTRODUCTION CONTE S TVMENU Controls/ConnectionOptions..........................4-9 RemoteControlKeyFunctions.........................10-11 InstallingBatteries..........................11 INSTALLATION StandInstallation............................................12-13 Setting Adjustment . . . .34 . up TV stations Autoprogrammetuning.........................
0323G_1-en_rev04 6/5/06 3:34 PM Page 3 TVMENU Screen Menu Options .64 AutoConfigure(RGB[PC]modeonly). ManualConfigure........................................65 . . . . . . . . . . SettingthePictureFormat......................66-67 SelectingWideVGA/XGAmode...................68 Initializing (Resettooriginalfactorysettings). . . . . . . . . . . . . . . CONTE S .69 APPENDIX ProgrammingtheRemote..................................70 Programmingcode.............................
/5/06 0323G_1-en_rev04 3:34 PM Page 4 INTRODUCTION CONTROLS This is the front This is INTRODUC a panel of models 42PC1RV * TVs. simplified representation of the front panel. Here shown may be somewhat different from your TV. Front Panel Controls Power/Standby Indicator ? illuminates red in ? illuminates white when the set is switched standby mode. on.
6/5/06 0323G_1-en_rev04 This is the front This is a 3:34 panel PM Page 5 of models 42PC3RV * TVs. simplified representation of the front panel. Here shown may be somewhat different from your TV. Front Panel Controls PROGRAMME Buttons INTRODUC VOLUME Buttons OK Button MENU Button INPUT Button ON/OFF Button Remote Control Sensor Power/Standby Indicator ? illuminates red in ? illuminates white when the set is switched standby mode. on.
0323A_en_1_rev08 10/26/06 10:49 AM 6 Page INTRODUCTION CONNECTION OPTION This is the back of models 42PC1RV * 42PC3RV * 42PC3RA * TVs. Here shown may be somewhat differ- panel , , ent from your TV. Back Connection Panel 42PC1RV * INTRODUC only AUDIO Input Connections are available for listening an external device. AUDIO stereo sound from VIDEO VIDEO Input Connects the video device.
6/5/06 3:34 This is the front panel 0323G_1-en_rev04 This is PM Page 7 of models 26LC2R * 32LC2R * TVs. , simplified representation a of the front panel. Here shown may be somewhat different from your TV. INTRODUC Front Panel Controls PROGRAMME Buttons PR VOL VOLUME Buttons OK OK Button MENU MENU Button INPUT INPUT Button R /I ON/OFF Button Stand ? This feature is not available for all models.
6/5/06 0323G_1-en_rev04 3:34 PM 8 Page CONTROLS This is the back panel of models 26LC2R * TVs. Back Connection Panel AUDIO INTRODUC VIDEO VIDEO 2 SVDEO a REMOTE AUDIO IN CONTROL IN (RGB) 10 9 11 7 component video/audio device to 8 Remote Control Port a PC/DTV to HDMI signal to HDMI port with HDMI Power Cord Socket 11 6 AV attempt to operate the TV on DC power. Output Connect second TV socket on the set.
6/5/06 0323G_1-en_rev04 This is the back 3:34 panel PM 9 Page of models 32LC2R * TVs. Back Connection Panel AUDIO Input Connections are available for listening an external device. stereo sound from AUDIO VIDEO VIDEO Input Connects the video device.
6/5/06 0323G_1-en_rev04 3:34 PM Page 10 INTRODUCTION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control POWER sensor on the TV. Switches the set on from INPUT TV POWER TV INPUT INTRODUC ARC VCR PIP PR- SIZE INPUT POSTION PIP PR+ Returns to the TV Switches the set DVD PIP or off to standby. TV INPUT TEXT standby on from from any mode. standby. If you press the button once, the input source OSD will appear on screen.
0323G_1-en_rev04 6/5/06 3:34 PM Page 11 Selects the remote MODE operating modes. INPUT TV 1 TV POWER INPUT TELETEXT These buttons BUTTONS For further DVD ARC details, used for teletext. see the 'Teletext' section. VCR TEXT PIP PR- are PIP SIZE POSTION PIP PR+ 1 THUMBSTICK (Up/Down/Left Right) PIP INPUT OK Adjusts /DOWN LIST MENU your selection Accepts VOLUME UP EXIT Allows you to navigate the on-screen menus and the system settings to your preference.
6/5/06 0323G_1-en_rev04 3:34 PM Page 12 INSTALLATION STAND INSTALLATION This feature is not available for all models. 1 2 A INSTAL O 4 3 B C Place the set with the screen facing down on a cushion or soft cloth as shown in Figures 1. Before unfolding the stand,please make sure two locks (A)on the bottom of the stand push outward. Pull the stand out as shown above in Figures 2 3.
0323G_1-en_rev04 6/5/06 3:34 PM Page 13 STAND INSTALLATION (Only 32LC2R ) * This feature is not available for all models. Carefully place cushioned screen from the set screen surface that will side down protect set on a and damage. Place the hook of the stand in the back of the set as INSTAL O shown. Install the 4 bolts provided securely, in the back of the set.
0323G_1-en_rev04 6/5/06 3:34 PM Page 14 INSTALLATION BASIC CONNECTION (42PC1RV * , 42PC3RV * ) These models have two cable arrangement methods Stand Arrange INSTAL O Stand 1 type as shown type. picture. 2 Hold the CABLE hands and to the stand 1 the cables type according push it MANAGEMENT with both as shown. CABLE MANAGEMENT 2 Connect the cables as necessary. To connect an additional equipment, see the External equipmentConnections section.
6/5/06 0323G_1-en_rev04 3:34 PM Page 15 BASIC CONNECTION (Only 26LC2R * , 32LC2R * ) Connect the cables as necessary. After connecting the cables neatly, arrange the cables to the Cable Holder. 1 To connect an additional equipment, see the External equipment Connections section. Install the CABLE MANAGEMENT 2 as Bundle the cables 3 INSTAL O shown. using the supplied twister holder.
0323G_1-en_rev04 6/5/06 3:34 PM Page 16 INSTALLATION INSTALLATION The TV can The TV is be installed in various ways such designed to be mounted as on a wall, or on a desktop etc. horizontally. GROUNDING Power Ensure that you connect the earth possible electric shock. If sible, have a qualified wire to ground grounding methods electrician install a are prevent not pos- separate circuit breaker.
6/5/06 0323G_1-en_rev04 HOW TO 3:34 PM JOIN Page 17 THE PRODUCT ASSEMBLY TO THE WALL TO PROTECT THE SET TUMBLING Set it up close to the wall so the product doesn't fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn't fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people.
6/5/06 0323G_1-en_rev04 3:34 PM Page 18 CONNECTIONS & SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION For optimum picture quality, adjust An antenna cable and converter are antenna direction. supplied.
6/23/06 0323G_1-en_rev04 11:49 AM 19 Page VCR SETUP To avoid picture Typically a of the noise frozen still picture from may remain visible screen leave (interference), on connecting with adequate VCR. If the 4:3 a the This part of CONNECTIONS & SETUP When an an distance between the VCR and TV. picture format is used; the fixed images mainly use pictures IN socket ANTENNA on the sides for the 42PC1RV * 42PC3RV * models.
6/5/06 0323G_1-en_rev04 3:34 PM Page 20 CONNECTIONS & SETUP VCR SETUP When Connect the S-VIDEO 1 with connecting S-Video cable an output of the VCR to the S-VIDEO the set. The input on pared to normal picture quality is improved; composite (RCA cable) input. com- ANT IN ANT OUT VCR IN S- EO OUT OU SW PUT CH (AUDIOL)VEO 34 Connect the audio 2 input jacks 20 VCR to the AUDIO VIDEO a Select AV 4 button ! G on or AV 1 input 1 COMPON the set.
6/5/06 0323G_1-en_rev04 3:34 PM 21 Page EXTERNAL EQUIPMENT CONNECTIONS 1 Connect the AUDIO/VIDEO and external (Video red) = equipment. yellow, Audio Left jacks Match = the between TV jack VN2 colors white, and Audio Right = AUDIO MONO VIDEO 2 Select AV 2 button - on input source with the remote control. If connected to A V using (except the I N P U T IN 1 input, select AV1 input IN input, select AV input source. - Camcorder If connected to A V source.
0323G_1-en_rev04 6/5/06 3:34 PM 22 Page CONNECTIONS & SETUP DVD SETUP When 1 2 connecting Connect the video with outputs (Y, PB, PR) of the COMPONENT VIDEO Connect the audio NENT AUDIO component cable a jacks on B (R) R AUDIO (L) to the the set. outputs of the jacks DVD DVD 1 DVD to the COMPO- 2 COMPONENT VDO N UDO the set. on AV OUT 3 Turn the DVD on player, insert a DVD.
6/5/06 0323G_1-en_rev04 When 3:34 PM connecting with Connect the HDMI 1 Page jack on 23 a HDMI cable output of the DVD to the HDMI IN RGB IN the set. REMOTE CONTROL IN Select HDMI 2 on input source with using AUDIO IN (RGB) OUT U the I N P U T button the remote control. RS-232C IN SERVICE) 1 Refer to the DVD 3 player's manual for operating instruc- tions. DVD HDMI-DVD OUTPUT ! NOTE receive the video and audio with HDMI cable.
6/5/06 0323G_1-en_rev04 3:34 PM 24 Page CONNECTIONS & SETUP STB SETUP (SET-TOP BOX) When connecting with a component cable B Connect the video 1 outputs (Y, PB, PR) to the COMPONENT VIDEO Connect the audio 2 of the jacks on jacks on R AUDIO (R) digital the set. to the 2 1 the set. COMPONENT N VDO Turn 3 the CONETIS&UP using ! set-top box. digital digital set-top box.
6/5/06 0323G_1-en_rev04 When 3:34 Page 25 connecting with Connect the RGB 1 PM RGB IN D-sub 15 a output of the digital set-top box (PC DTV) jack on AUDIO IN Digital to the (R) AUDIO (L) RGB-DTV OUTPUT Set-top the set. Connect the audio 2 pin cable outputs of the set-top box (RGB) jack on the set. to the 1 2 3 Turn on the digital set-top box. (Refer digital set-top box.
6/5/06 0323G_1-en_rev04 3:34 PM 26 Page CONNECTIONS & SETUP PC SETUP This TV provides Plug When and connecting Play capability, meaning with a D-sub 15 that the PC adjusts automatically to the TV's settings. pin cable PC 1 Connect the PC audio 2 CONETIS&UP output to the TV's AUDIO IN (RGB) input. Turn 4 Select RGB on on 2 1 the PC. 3 ton RGB-PC OUTPUT PC SOUND Connect the TV to the PC with the PC cable.
6/5/06 0323G_1-en_rev04 3:34 Supported Display (26LC2R / * PM Page Resolution 32LC2R * 27 (RGB[PC] mode) ) Supported Display (42PC1RV * Resolution (RGB[PC] mode) / 42PC3RV * ) Horizontal Vertical Frequency(KHz) Frequency(Hz) Resolution 640x350 31.5 70.8 720x400 31.5 70.8 640x480 31.5 800x600 Horizontal Vertical Frequency(KHz) Frequency(Hz) 640x350 31.5 70.8 720x400 31.5 70.8 59.9 640x480 31.5 59.9 37.9 60.3 848x480 31.5 60.0 1024x768 48.4 60.
0323G_1-en_rev04 6/5/06 3:34 PM 28 Page CONNECTIONS & SETUP TURNING THE TV ON If your TV will be turned on, you will be able to use its features. INPUT Turning on TV the TV TV POWER INPUT DVD ARC 1 connect power cord First, correctly. At this moment, the TV switches to VCR TEXT standby mode.
6/5/06 0323G_1-en_rev04 3:34 PM Page 29 SPECIAL FUNCTIONS PIP (Picture-In-Picture) PIP lets you view 2 different inputs (sources) on your TV same time. One source will be large, and the other at the will show a smaller inset screen INPUT source TV TV POWER INPUT image. DVD ARC (But, it can't Component, RGB, HDMI mode. adjust 480i/576i resolution of Component mode.
0323G_1-en_rev04 6/5/06 3:34 PM Page 30 SPECIAL FUNCTIONS PIP Input (Picture-In-Picture) Source Selection for Sub Picture Press the PIP INPUT button to select the input source Each press of PIP INPUT button is pressed, each (It is available in TV, AV1, AV2 mode.) Sub Picture Size Press the S I Z E button to the sub With S I Z E button in PIP mode, sub SPECIALFUNTO 30 Moving input Adjustment (PIP adjust picture picture the Sub Picture is for the sub source picture.
0323G_1-en_rev04 6/5/06 3:34 PM Page 31 TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
6/5/06 0323G_1-en_rev04 3:34 PM Page 32 SPECIAL FUNCTIONS TELETEXT TOP Text The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block group With the blue button you Use the yellow button to With the green button you Alternatively Direct can page Corresponding permits progress from block to block.
6/5/06 0323G_1-en_rev04 3:34 PM 33 Page Teletext Functions Special ? A REVEAL Press this button to Press this button A display concealed information, such as solutions again to remove the information from the display. of riddles or puzzles. SIZE Selects double height text. enlarge the top half of the page. button again to enlarge the bottom half of the button again to return to the normal display. Press this button to Press this Press this A page.
6/5/06 0323G_2-en_rev04 3:35 PM Page 34 TV MENU ON SCREEN MENUS SELECTION AND Your TV's OSD The OSD ( On mainly Display ) Screen use pictures may differ from what is shown in this manual. slightly for the 42PC1RV * 42PC3RV * , 1 Press the M E N U button and then D / E button to 2 Press the G button and then D / E button to select 3 Change You the setting can move of to the an item in the sub higher level menu ADJUSTMENT . display a menu each menu. item.
6/5/06 0323G_2-en_rev04 3:35 PM TV MENU Page 35 Setting up TV stations AUTO PROGRAMME TUNING TEXT PIP PIP PR- can be stored by programme numbers (0 to Once have the stations, you preset you will be able to use the 99). PR+/- or NUMBER buttons to scan the stations you have pro- Up SIZE POSTION PIP PR+ PIP INPUT to 100 TV stations LIST MENU I/II EXIT SLEEP grammed. Stations can be tuned using automatic or OK manual modes.
0323G_2-en_rev04 6/5/06 3:35 PM 36 Page TV MENU Setting up TV stations MANUAL PROGRAMME TUNING TEXT PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT Manual programme lets you manually tune and arrange the stations in whatever order you desire. LIST MENU I/II EXIT SLEEP OK 1 Press the MENU button and then DE button to select the Station menu. Q.VIEW VOL 2 3 4 PR Press the G button and then DE button to select Manual MUTE programme.
6/5/06 0323G_2-en_rev04 3:35 PM Page 37 FINE TUNING ARC Normally fine tuning is only necessary if reception is poor. VCR TEXT PIP PR- PIP SIZE POSTION PIP PR+ LIST PIP INPUT I/II MENU EXIT SLEEP OK 1 Press the M E NU button and then DE button to select the Station menu. Q.VIEW VOL 2 Press the G button and then DE button to select Manual PR MUTE programme. 123 45 3 4 Press the G button and then DE button to select Fine.
0323G_2-en_rev04 6/5/06 3:35 PM TV MENU Page 38 Setting up TV stations ASSIGNING A STATION NAME ARC You can assign a station name with five characters to each programme number. VCR TEXT PIP PIP PR- SIZE POSTION PIP PR+ LIST PIP INPUT MENU I/II EXIT SLEEP OK 1 Press the M E N U button and then DE button to select the Station menu. Q.VIEW VOL 2 MUTE programme.
6/5/06 0323G_2-en_rev04 3:35 PM Page 39 PROGRAMME EDIT ARC This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. VCR TEXT PIP PR- PIP SIZE POSTION PIP PR+ LIST PIP INPUT I/II MENU EXIT SLEEP OK Q.VIEW 1 VOL Press the MENU button and then DE button to select the Station PR menu.
0323G_2-en_rev04 6/5/06 3:35 PM Page TV MENU 40 Setting up TV stations FAVOURITE PROGRAMME This function lets you select your favourite programmes directly. LIST MENU I/II EXIT Repeatedly press the SLEEP FAV button to select stored favourite programmes. OK Q.VIEW VOL 1 PR Press the M E N U button and then DE button to select MUTE the Station menu. 123 456 2 Press the G button and then DE button to select 789 Favourite programme. 3 4 10 * FAV ? Press the G button.
6/5/06 0323G_2-en_rev04 3:35 PM Page 41 CALLING THE PROGRAMME TABLE TEXT You can playing check the programmes stored in the memory the programme table. by dis- PIP PR- PIP SIZE POSTION PIP PR+ LIST MENU PIP INPUT I/II EXIT SLEEP OK A Displaying programme table Press the LIST button to display the Programme The programme table appears on the table Q.VIEW menu. VOL PR screen. MUTE One programme table contains ten programmes as shown. 123 456 ! a.
0323G_2-en_rev04 6/5/06 3:35 PM Page Picture Menu TV MENU PSM 42 Status (Picture Dynamic Select this Standard The most Mild Select this option Select this option User 1/2 option to Memory) display with and natural general to to a screen with display PIP PIP PR- SIZE POSTION PIP PR+ PIP INPUT status. image. the user-defined setting. a TEXT sharp image. mild display use Options LIST I/II MENU EXIT SLEEP OK Q.
0323G_2-en_rev04 6/5/06 Picture 3:35 PM Page 43 Adjustment (PSM-User option) Contrast Adjusts the difference between the light and dark levels in the picture. Brightness Increases C o lo or Adjusts the level of crispness in the Adjusts the balance between Tint SIZE POSTION PIP INPUT of all colours. light and dark areas of the picture. The lower the level, the softer the image. Sharpness PIP PIP PR+ decreases amount of white in the your picture.
0323G_2-en_rev04 6/5/06 3:35 PM Page TV MENU CSM 44 Picture Menu (Colour To initialize values (reset Status to default Options Memory) settings), TEXT select the Co ol PIP PIP PR- SIZE POSTION PIP PR+ PIP INPUT option. Choose one of three automatic colour enhance hotter colours such intense colours with more as red, adjustments. or Set to set to cool to warm see to less LIST blue. MENU EXIT I/II SLEEP OK Q.
0323G_2-en_rev04 6/5/06 3:35 PM Manual Colour (CSM - User Page 45 Temperature Control option) TEXT PIP PIP PR- To adjust red, green, blue to any colour temperature you SIZE POSTION PIP PR+ PIP INPUT prefer. LIST MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 123 1 Press the MENU button and then DE button to select the Picture Picture menu. PSM 2 Press the G button and then DE button to select CSM. 3 Press the G button and then DE button to select User.
6/5/06 0323G_2-en_rev04 3:35 PM 46 Page TV MENU Picture Menu Options FUNCTION TEXT XD is LG electronic's real HD source PIP PR- unique picture improving technology to display a through an advanced digital signal processing algo- PIP SIZE POSTION PIP PR+ PIP INPUT rithm. It's not available to LIST this function in RGB-PC mode. use MENU EXIT I/II SLEEP OK Q.VIEW Press the M E N U button and then DE button to select 1 the Picture VOL PR menu.
0323G_2-en_rev04 6/5/06 3:35 PM Page 47 ADVANCED-CINEMA TEXT Set up the TV for the best picture appearance for viewing PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT movies. When you operate Cinema (3:2 Pull-Down Mode or Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in Analog TV, AV, S-Video and Cinema Correction Component 480i/576i LIST MENU I/II EXIT SLEEP OK mode. Q.
6/5/06 0323G_2-en_rev04 3:35 PM Page TV MENU 48 Picture Menu Options ADVANCED-BLACK LEVEL TEXT When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the This function works in the Video (NTSC-M) or mode: AV following PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT screen. (NTSC-M), S- LIST MENU EXIT HDMI.
0323G_2-en_rev04 6/5/06 3:35 PM Page 49 RESET TEXT PIP PR- PIP SIZE LIST MENU EXIT 1 2 PIP INPUT I/II SLEEP Press the MENU button and then DE button to select the Picture POSTION PIP PR+ OK menu. Press the G button and then DE button to select Reset. Q.VIEW VOL PR MUTE 3 Press the G button to initialize the ? Returns to the default at the adjusted 123 value. settings PSM, CSM, XD, 456 Advanced Picture factory.
6/5/06 0323G_2-en_rev04 3:36 PM Sound Menu TV MENU SSM 50 Page Status (Sound Options Memory) TEXT You can select your Music, Movie quency of the preferred setting; Surround MAX, Flat, and can also Sports you adjust the sound fre- or PIP PIP PR- sound SIZE POSTION PIP PR+ PIP INPUT equalizer. SSM lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the LIST MENU EXIT I/II SLEEP programme content.
0323G_2-en_rev04 6/5/06 Sound (SSM 3:36 PM Page 51 Frequency Adjustment User - option) TEXT PIP PR- Adjust the sound PIP SIZE POSTION PIP PR+ PIP INPUT equalizer. LIST MENU I/II EXIT SLEEP OK 1 Press the MENU button and then DE button to select the SOUND menu. Q.VIEW 2 Press the G button and then DE button to select SSM. Sound SSM 3 AVL Press the G button and then DE button to select User. Balance 0 Speaker 4 Press the G button.
0323G_2-en_rev04 6/5/06 3:36 PM Page TV MENU AVL 52 Sound Menu (Auto Volume Options Leveler) TEXT PIP PR- AVL automatically keeps change programmes. on an equal volume level even PIP SIZE POSTION PIP PR+ PIP INPUT if you LIST MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then DE button to select the SOUND 2 menu. Q.VIEW VOL Press the G button and then DE button to select AVL PR Sound .
0323G_2-en_rev04 6/5/06 3:36 BALANCE PM Page 53 ADJUSTMENT TEXT You can adjust the sound balance of speaker to the levels you PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT prefer. LIST MENU EXIT I/II SLEEP OK Q.VIEW VOL 1 PR Press the MENU button and then DE button to select the SOUND Sound menu. SSM AVL 2 Press the G button and then DE button to select Balance. Balance 0 Speaker 3 Press the desired 4 G button and then F G button to make adjustment.
0323G_2-en_rev04 6/5/06 3:36 PM Page TV MENU 54 Sound Menu Options SPEAKER You can adjust the internal TEXT speaker status. PIP PR- In AV, COMPONENT, RGB and HDMI with HDMI to DVI speaker and/or variable is no video signal. audio can be outputted even PIP SIZE PIP INPUT cable, though there LIST MENU EXIT If you want to internal POSTION PIP PR+ I/II SLEEP your external hi-fi stereo system, turn off the of the set.
6/5/06 0323G_2-en_rev04 3:36 PM Page 55 STEREO/DUAL RECEPTION INPUT When a programme is selected, the sound information for the tion appears after the programme number and station name sta- TV TV POWER INPUT disap- pear. DVD ARC VCR TEXT PIP PR- DUAL I Sends the DUAL II Sends the primary loudspeakers. broadcast secondary loudspeakers.
0323G_2-en_rev04 6/5/06 3:36 PM 56 Page TV MENU Sound Menu Options NICAM RECEPTION If the set is equipped with the receiver for NICAM reception, Instantaneous Companding Audio Multiplex) digital sound can be Sound output can the I/II button be selected according to the high quality NICAM (Near received. type of received broadcast as follows by pressing repeatedly.
0323G_2-en_rev04 6/5/06 3:36 PM Page TV MENU 57 Time Menu Options CLOCK SETUP TEXT You must set the time correctly before If current time is erased by unplugged, setting a using on/off time power failure or PIP PIP PR- function. SIZE POSTION PIP PR+ PIP INPUT the set is reset the clock. LIST MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 1 123 Press the MENU button and then D / E button to 456 select the Time menu.
0323G_2-en_rev04 6/5/06 3:36 PM 58 Page TV MENU Time Menu Options ON/OFF TIME TEXT The Off time preset automatically switches the set to at the standby SIZE POSTION PIP PR+ PIP INPUT time. Two hours after the set is switched time function it will unless has PIP PIP PR- automatically switch been pressed. back to on by the on standby mode a LIST button MENU EXIT I/II SLEEP OK Once the on time/off time is set, these functions operate daily at the preset time. Q.
0323G_2-en_rev04 6/5/06 3:36 PM Page 59 AUTO SLEEP If set to ically on and there is no input signal, the TV turns off automat- after 10 minutes. Time Clock Off time On time Auto sleep Press the M E N U button and then D / E button to select 1 the Time DE menu. FG OK MENU 1 2 Press the G button and then D / E button to select Auto sleep. Time Clock Off time Press the G button and then D / E button to select On 3 or Off..
6/5/06 0323G_2-en_rev04 3:36 PM Page TV MENU 60 Special Menu Options CHILD LOCK TEXT This set is set to to remember which if you turn the set off. programmed even option it was PIP PIP PR- The TV can be set so that the remote control is needed to trol it. This feature can be used to prevent unauthorized viewing. SIZE POSTION PIP PR+ PIP INPUT con- last LIST MENU EXIT I/II SLEEP OK Q.
6/5/06 0323G_2-en_rev04 ISM 3:36 PM Page 61 (Image Sticking Minimization) A frozen of still PC/video game displayed on the screen for will result in a prolonged periods ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time. picture from Method a TEXT PIP PR- PIP LIST It's not available to use SIZE PIP INPUT I/II MENU EXIT this function in 26LC2R * 32LC2R * SLEEP , models. OK White wash Q.
0323G_2-en_rev04 6/5/06 3:36 PM Page TV MENU 62 Special Menu Options LOW POWER TEXT This is the function to reduce the power It's not available to use consumption of the set. PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT this function in 26LC2R * 32LC2R * , models. LIST MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 123 456 1 Press the M E N U button and then D / E button to select the Special Special menu.
6/5/06 0323G_2-en_rev04 3:36 PM Page 63 XD DEMO TEXT PIP PIP PR- Use it to see the difference between XD Demo on SIZE POSTION PIP PR+ PIP INPUT and XD Demo off. It's not available to use this function in RGB[PC] mode. LIST I/II MENU EXIT SLEEP OK 1 Press the MENU button and then use D / E button to Q.VIEW select the Special VOL PR menu. MUTE 2 Press the G button and then use 123 D / E button to select 456 XD 3 Demo.
0323G_2-en_rev04 6/5/06 3:36 PM 64 Page Screen Menu TV MENU AUTO CONFIGURE Options (RGB [PC] Automatically adjusts picture position shaking. and minimizes mode only) image TEXT PIP PR- After adjustment, if the image is still not correct, your functioning properly but needs further adjustment. PIP SIZE POSTION PIP PR+ PIP INPUT set is LIST MENU EXIT I/II SLEEP OK Auto configure This function is for the automatic adjustment of the screen posiphase.
6/5/06 0323G_2-en_rev04 3:36 PM 65 Page MANUAL CONFIGURE TEXT If the picture if characters isn't clear after auto still are adjustment and especially trembling, adjust the picture phase PIP PIP PR- SIZE POSTION PIP PR+ PIP INPUT manually. LIST To correct the screen adjust size, This function works in the Clock following . mode : I/II SLEEP RGB[PC], HDMI (480p/576p/720p/1080i), (480p/576p/720p/1080i). RGB[DTV], MENU EXIT OK COMPONENT Q.
6/5/06 0323G_2-en_rev04 3:36 PM Page TV MENU 66 Screen Menu Options SETTING THE PICTURE FORMAT You watch the can screen Original, 4:3, 16:9, in various picture formats; Spectacle 14:9 Zoom1 INPUT , TV and Zoom2. TV POWER INPUT DVD ARC If a fixed displayed on the screen for a long time, that fixed become imprinted on the screen and remain visible. image image may There might VCR is be uncomfortable in full mode.
6/5/06 0323G_2-en_rev04 ? 3:36 PM Page 67 Zoom1 Following selection will lead you to view the alternation, while filling the entire bottom ? portions of the picture screen. will be picture without any ! However, the top and G cropped. NOTE You only select 4:3 16:9 Component, RGB, mode only. can (Wide) HDMI Zoom2 , in Choose Z both ture o o m 2 when you want the picture to be altered, horizontally extended and vertically cropped.
0323G_2-en_rev04 6/5/06 3:36 PM Page TV MENU 68 Screen Menu Options SELECTING WIDE VGA/XGA MODE TEXT PIP PIP PR- To see a normal picture, SIZE POSTION PIP PR+ PIP INPUT match the resolution of RGB mode and selection of VGA/XGA mode. LIST This function works in the following mode: RGB[PC] MENU EXIT mode. I/II SLEEP OK VGA Mode: 42PC1RV * 42PC3RV * , XGA Mode: 26LC2R * , 32LC2R * Q.VIEW Screen config. Auto Manual config.
0323G_2-en_rev04 6/5/06 3:36 PM Page Initializing (Reset 69 to original factory settings) This function operates in current mode. To initialize the adjusted value TEXT PIP PR- PIP SIZE POSTION PIP PR+ LIST MENU EXIT PIP INPUT I/II SLEEP OK 1 Press the MENU button and then DE button to select Q.VIEW the Screen VOL menu. PR MUTE 2 Press the G button and then DE button to select 123 Reset. 456 789 3 Press the G button. Screen config.
6/5/06 0323G_2-en_rev04 3:36 PM Page 70 APPENDIX PROGRAMMING THE REMOTE The remote is a multi-brand universal remote. It or a be can programmed to operate most remote-control- lable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a 1 code into a remote mode Test your remote control.
0323G_2-en_rev04 6/5/06 3:36 PM 71 Page PROGRAMMING THE REMOTE VCRs Brand Codes AIWA 034 AKAI 016 043 125 146 046 Brand Codes MAGNAVOX 031 033 067 068 012 031 124 MARANTZ 034 033 041 Brand Codes SAMSUNG 032 040 102 104 105 107 109 112 113 115 120 122 022 043 048 135 SANYO003 007 010 014 067 125 069 AMPRO072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 MARTA 101 MATSUI 027 030 SANSUI BROKSONIC 035 037 129 MEI 031 033 CANON 028
6/5/06 0323G_2-en_rev04 3:36 PM Page 72 APPENDIX TROUBLESHOOTING CHECKLIST The does operation not work normally.
6/5/06 0323G_2-en_rev04 3:36 PM Page 73 TROUBLESHOOTING CHECKLIST The audio function does not work. Press the VOL+ Picture OK No - (or Volume) button. Sound muted? Press M U T E button. & Try sound another channel. The problem Are the audio cables installed from No output of the one speakers Adjust A Unusual sound from inside the There is The product problem a is signal in PC mode. Vertical bar stripe ground & Noise & in ambient product option.
0323G_2-en_rev04 6/5/06 3:36 PM Page 74 APPENDIX MAINTENANCE Early malfunctions have your new Cleaning the 1 Here's a 2 it to Make a the Cleaning the To remove Please be dirt sure prevented. Careful and regular cleaning can extend the amount of time you will unplug the power cord before you begin any cleaning. to turn the power off and the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm little fabric softener or dish washing detergent.
6/28/06 0323G_2-en_rev05 9:29 AM Page 75 PRODUCT SPECIFICATIONS 26LC2R * MODELS 26LC2R-TJ including stand Dimensions 32LC2R * 32LC2R * 32LC2R-TJ 32LC2RW-TJ 681.0 x 542.0 x 172.0 mm 811.0 x 630.0 x 235.0 mm 26.8 x 21.3 x 6.8 inches 31.9 x 24.8 x 9.3 inches (Width Height Depth) x x excluding stand Weight Power 811.0 x 566.8 x 123.5 31.9 x 22.3 x 4.9 inches including stand 18.5 excluding stand 15.2 kg / 40.8 lbs kg/ 33.5 lbs kg / 40.8 lbs 18.
0323G_3-en_rev05 6/23/06 11:51 AM Page 76 APPENDIX EXTERNAL CONTROL DEVICE SETUP Connect the RS-232C control system) input jack an external control device and control the TV's functions Connect the serial port of the control device 232C connection cables RS-232C to are not supplied to the RS-232C with the TV. Setup AUDIO IN RGB/DVI) RS 232C N (CONTR PC Type of Connector; APENDIX No.
6/5/06 0323G_3-en_rev04 RS-232C 3:37 PM 77 Page Configurations Configurations ( Standard 7-Wire RS-232C cable ) PC TV SET RXD 2 3 3-Wire TXD Configurations ( Not standard ) PC TV SET RXD 2 3 TXD TXD 3 2 RXD TXD 3 2 RXD GND 5 5 GND GND 5 5 GND DTR 4 6DSR DTR 4 6DTR DSR 64 DTR DSR 64 RTS 7 8 CTS RTS 7 7 RTS CTS 8 7 RTS CTS 8 8 CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 DSR Set ID - Use this function to - Refer to 'Real Data specify a Map
6/5/06 0323G_3-en_rev04 3:37 PM 78 Page APPENDIX Command Reference List COMMAND1 COMMAND2 k 01. Power DATA 0~1 a * 15. Balance 0~64 t k c k d 0~1 17. Red 04. Volume Mute k e 0~1 18. Green 05. Volume Control k f 0~64 19. Blue 06. Contrast k g 0~64 20 Abnormal Status 07. k h 0~64 21. ISM Method j p 08. Colour k i 0~64 22. Low Power j q 09. Tint k j 0~64 23. Orbiter Time Setting j r 1~FE 10. k k 0~64 24. Orbiter Pixel Setting j s 1~3 11.
6/5/06 0323G_3-en_rev04 01. Power 3:37 PM 79 Page 05. (Command2:a) To control Power On/Off of the TV. Transmission Volume To adjust You [k][a][ ][Set ID][ ][Data][Cr] : Power Off Data 1 : can Power On also Transmission Acknowledgement [a][ ][Set ID][ ][OK][Data][x] volume with the volume buttons adjust [k][f][ ][Set ID][ ][Data][Cr] DataMin:0~Max:64 To show Power On/Off. Transmission (Command2:f) volume. remote control.
6/5/06 0323G_3-en_rev04 3:37 PM 80 Page APPENDIX 10. 15. Balance Sharpness (Command2:k) To adjust You can the screen also sharpness. adjust sharpness Transmission To in the PICTURE menu. [k][k][ ][Set ID][ ][Data][Cr] 1'. See page 81. mapping Transmission 16. Color Screen (On trolling remotely. Display) on/off when con- [k][l][ ][Set ID][ ][Data][Cr] Control Lock Mode Transmission To panel on/off, 13.
0323G_3-en_rev04 6/5/06 20. Abnormal State To recognize 3:37 PM Page 81 24 (Command2:z) an . abnormal state. Orbiter Pix el Setting To adjust pixel (Command1:j, Command2:s) number in orbiter function. This feature is not available for all models. This feature is not available for all models.
6/5/06 0323G_3-en_rev04 3:37 PM Page 82 APPENDIX 27. Key (Command1:m, Command2:c) To send IR remote Transmission Data: - select Input code. To [m][c][ ][Set ID][ ][Data][Cr] code Key key 29. (Command1:x adjust input Transmission Refer to page 84. source , Command2:y) for sub picture in PIP mode [x][y][ ][Set ID][ ][Data][Cr] Data: Structure Acknowledgement [c][ ][Set ID][ ][OK][Data][x] MSB LSB 00000000 28.
0323G_3-en_rev04 6/5/06 3:37 PM Page 83 IR CODES 1. How to Connect Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes Output waveform modulated with 37.
0323G_3-en_rev04 6/5/06 3:37 PM Page 84 APPENDIX REMOTE CONTROL IR CODES Code (Hexa) APENDIX 84 Function Code Note (Hexa) Function Note 0F TV R/C Button 71 GREEN R/C Button 0B INPUT R/C Button 63 YELLOW R/C Button 08 POWER R/C Button 61 BLUE R/C Button C4 POWER ON Discrete IR Code (Only On) 02 VOL + R/C Button C5 POWER OFF Discrete IR Code (Only Power OFF) 03 VOL R/C Button 60 PIP R/C Button 00 PR+ R/C Button (Power On/Off) Power - 0E SLEEP R/C But
0323G_3-en_rev04 6/5/06 3:37 PM Page 85
0323G_3-en_rev04 6/5/06 3:37 PM Page 86