0323N_1-en_rev00 3/24/06 5:22 PM Page 1 P/NO : 38289U0323N (0603-REV00) Printed in Korea
0323G_1-en_rev02 3/22/06 1:36 AM Page 2
0323G_1-en_rev02 3/22/06 12:06 PM Page 1 ACCESSORIES IN PU TV T INPU PO W ER T AR C PI P TE XT PR - TV DV D PIP PI P PR + VC R SIZ E POSTI PIP ON INP UT EX IT LI ST M EN U I/I I OK Owner's Manual VO L Q.V IEW MU TE 1 4 5 6 9 FAV RE ? VE AL INDE Batteries 3 8 0 M E PR 2 7 * TI Owner’s Manual SL EE P ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product.
0323G_1-en_rev02 3/22/06 1:36 AM Page 2 CONTENTS ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 CONTENTS INTRODUCTION On Screen Menus Selection and Adjustment . . . . .34 Controls / Connection Options . . . . . . . . . . . . . . . . . . . . . . . . . .4-9 Remote Control Key Functions . . . . . . . . . . . . . . . . . . . . . . . . .10-11 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . .
0323G_1-en_rev02 3/22/06 1:36 AM Page 3 TV MENU CONTENTS Screen Menu Options Auto Configure (RGB [PC] mode only) . . . . . . . . . . . .64 Manual Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 Setting the Picture Format . . . . . . . . . . . . . . . . . . . . . .66-67 Selecting Wide VGA/XGA mode . . . . . . . . . . . . . . . . . . .68 Initializing (Reset to original factory settings) . . . . . . . . . . . . . . . .69 APPENDIX Programming the Remote . . . . .
0323G_1-en_rev02 3/22/06 1:36 AM Page 4 INTRODUCTION CONTROLS This is the front panel of models 42PC1RV* TVs. ■ This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. INTRODUCTION Front Panel Controls INPUT MENU PR VOL OK Power/Standby Indicator • illuminates red in standby mode. • illuminates white when the set is switched on.
0323G_1-en_rev02 3/22/06 1:36 AM Page 5 This is the front panel of models 42PC3RV* TVs. ■ This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. PROGRAMME Buttons PR INTRODUCTION Front Panel Controls VOLUME Buttons VOL OK OK Button MENU MENU Button INPUT INPUT Button ON/OFF Button Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates white when the set is switched on.
0323G_1-en_rev02 3/22/06 1:36 AM Page 6 INTRODUCTION CONNECTION OPTION This is the back panel of models 42PC1RV*, 42PC3RV* TVs. Back Connection Panel 42PC1RV* only INTRODUCTION AV IN 2 AUDIO Input Connections are available for listening stereo sound from an external device. R AUDIO L/MONO VIDEO Input Connects the video signal from a video device.
0323G_1-en_rev02 3/22/06 1:36 AM Page 7 This is the front panel of models 26LC2R*, 32LC2R* TVs. ■ This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. INTRODUCTION Front Panel Controls PR PROGRAMME Buttons VOL VOLUME Buttons OK OK Button MENU MENU Button INPUT INPUT Button R /I ON/OFF Button Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates white when the set is switched on.
0323G_1-en_rev02 3/22/06 1:36 AM Page 8 CONTROLS This is the back panel of models 26LC2R* TVs. Back Connection Panel R L/MONO AUDIO INTRODUCTION AUDIO Input Connections are available for listening stereo sound from an external device. VIDEO VIDEO Input Connects the video signal from a video device.
0323G_1-en_rev02 3/22/06 1:36 AM Page 9 This is the back panel of models 32LC2R* TVs. Back Connection Panel AUDIO L/MONO VIDEO AV IN 2 AC IN 2 1 3 AUDIO Input Connections are available for listening stereo sound from an external device. VIDEO Input Connects the video signal from a video device.
0323G_1-en_rev02 3/22/06 1:36 AM Page 10 INTRODUCTION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Switches the set on from standby or off to standby. INPUT TV TV POWER INTRODUCTION INPUT DVD ARC VCR TEXT PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT TV INPUT Returns to the TV viewing from any mode. Switches the set on from standby. INPUT If you press the button once, the input source OSD will appear on screen.
0323G_1-en_rev02 3/22/06 1:36 AM Page 11 MODE Selects the remote operating modes. INPUT TV DVD ARC VCR TEXT PIP PR- PIP SIZE POSTION PIP PR+ 1 PIP INPUT THUMBSTICK Allows you to navigate the on-screen menus and adjust (Up/Down/Left the system settings to your preference. Right) OK Accepts your selection or displays the current mode. INTRODUCTION INPUT TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ‘Teletext’ section.
0323G_1-en_rev02 3/22/06 1:36 AM Page 12 INSTALLATION STAND INSTALLATION ■ This feature is not available for all models. 1 2 A INSTALLATION 4 3 B C ■ Place the set with the screen facing down on a cushion or soft cloth as shown in Figures 1. Before unfolding the stand,please make sure two locks (A)on the bottom of the stand push outward. ■ Pull the stand out as shown above in Figures 2 ~ 3.
0323G_1-en_rev02 3/22/06 1:36 AM Page 13 STAND INSTALLATION (Only 32LC2R*) Carefully place the set screen side down on a cushioned surface that will protect set and screen from damage. 2 Place the hook of the stand in the back of the set as shown. 3 Install the 4 bolts provided securely, in the back of the set.
0323G_1-en_rev02 3/22/06 1:36 AM Page 14 INSTALLATION BASIC CONNECTION (42PC1RV*, 42PC3RV*) ■ These models have two cable arrangement methods according to the stand type. Stand type 1 Arrange the cables as shown picture. INSTALLATION Stand type 2 1 Hold the C A B L E M A N A G E M E N T with both hands and push it as shown. CABLE MANAGEMENT 2 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section.
0323G_1-en_rev02 3/22/06 1:36 AM Page 15 BASIC CONNECTION (Only 26LC2R*, 32LC2R*) 1 Connect the cables as necessary. After connecting the cables neatly, arrange the cables to the Cable Holder. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section. Install the C A B L E M A N A G E M E N T as shown. 3 Bundle the cables using the supplied twister holder.
0323G_1-en_rev02 3/22/06 1:36 AM Page 16 INSTALLATION INSTALLATION ■ ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. GROUNDING Power Supply INSTALLATION Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
0323G_1-en_rev02 3/22/06 1:36 AM Page 17 HOW TO JOIN THE PRODUCT ASSEMBLY TO THE WALL TO PROTECT THE SET TUMBLING ■ ■ Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people.
0323G_1-en_rev02 3/22/06 1:36 AM Page 18 CONNECTIONS & SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied. ■ Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket CONNECTIONS & SETUP ANTENNA IN ANTENNA IN RF Coaxial Wire (75 ohm) VHF Antenna Turn clockwise to tighten.
0323G_1-en_rev02 3/22/06 1:36 AM Page 19 VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. ■ This part of CONNECTIONS & SETUP mainly use pictures for the 42PC1RV*, 42PC3RV* models.
0323G_1-en_rev02 3/22/06 1:36 AM Page 20 CONNECTIONS & SETUP 2 1 AV IN 1 VCR SETUP ( S-VIDEO VIDEO ) AUDIO When connecting with an S-Video cable 1 Connect the S-VIDEO output of the VCR to the S - V I D E O input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. ANT IN ANT OUT OUTPUT SWITCH 3 2 VCR IN S-VIDEO OUT (R) AUDIO (L) VIDEO 4 1 Connect the audio outputs of the VCR to the A U D I O input jacks on the set.
0323G_1-en_rev02 3/22/06 1:36 AM Page 21 EXTERNAL EQUIPMENT CONNECTIONS 1 V I D E O jacks between TV Connect the A U D I O/V and external equipment. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) AV V IN 2 R AUDIO L/MONO MONO VIDEO 2 1 Camcorder Video Game Set 3 Operate the corresponding external equipment. Refer to external equipment operating guide.
0323G_1-en_rev02 3/22/06 1:36 AM Page 22 CONNECTIONS & SETUP DVD SETUP When connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T V I D E O jacks on the set. 2 Connect the audio outputs of the DVD to the C O M P ON E N T A U D I O jacks on the set. DVD B (R) AUDIO (L) R 2 1 COMPONENT IN VIDEO AUDIO UDIO 2 1 AV OUT 5 Select Component1 or Component2 input source with using the I N P U T button on the remote control.
0323G_1-en_rev02 3/22/06 1:36 AM Page 23 When connecting with a HDMI cable 1 Connect the HDMI output of the DVD to the H D M I I N jack on the set. 2 Select HDMI input source with using the I N P U T button on the remote control. RGB IN (PC/DTV) REMOTE AUDIO IN CONTROL IN (RGB) HDMI IN VARIABLE AUDIO UDIO OUT RS-232C IN (CONTROL & SER SERVICE) VICE) 1 COMPONENT IN Refer to the DVD player's manual for operating instructions.
0323G_1-en_rev02 3/22/06 1:36 AM Page 24 CONNECTIONS & SETUP STB (SET-TOP BOX) SETUP When connecting with a component cable Digital Set-top Box B 1 Connect the video outputs (Y, PB, PR) of the digital set-top box to the C O M P O N E N T V I D E O jacks on the set. 2 Connect the audio output of the digital set-top box to the C O M P O N E N T A U D I O jacks on the set. (R) AUDIO (L) R 2 1 COMPONENT IN VIDEO 3 Turn on the digital set-top box.
VARIABLE 0323G_1-en_rev02 3/22/06 1:36 AM Page 25 AUDIO OUT RS-232C IN (CONTROL & SERVICE) When connecting with a D-sub 15 pin cable 1 Connect the RGB output of the digital set-top box to the R G B I N ( P C / D T V ) jack on the set. 2 Connect the audio outputs of the set-top box to the A U D I O I N ( R G B ) jack on the set. (R) AUDIO (L) 1 2 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
0323G_1-en_rev02 3/22/06 1:36 AM Page 26 CONNECTIONS & SETUP PC SETUP ■ This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable CONNECTIONS & SETUP 26 1 Connect the TV to the PC with the PC cable. 2 Connect the PC audio output to the TV’s A U D I O I N ( R G B ) input. 3 Turn on the PC.
0323G_1-en_rev02 3/22/06 1:36 AM Page 27 Supported Display Resolution (RGB[PC] mode) (26LC2R*/ 32LC2R*) Supported Display Resolution (RGB[PC] mode) (42PC1RV*/ 42PC3RV*) Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.5 70.8 640x350 31.5 70.8 720x400 31.5 70.8 720x400 31.5 70.8 640x480 31.5 59.9 640x480 31.5 59.9 800x600 37.9 60.3 848x480 31.5 60.0 1024x768 48.4 60.0 852x480 31.5 60.0 1280x768 47.
0323G_1-en_rev02 3/22/06 1:36 AM Page 28 CONNECTIONS & SETUP TURNING THE TV ON If your TV will be turned on, you will be able to use its features. INPUT TV Turning on the TV DVD ARC 1 First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , INPUT, P R D / E button on the TV or press the POWER, T V, INPUT, PR +/-, Number(0~9 9 ) button on the remote control and then the TV will switch on.
0323G_1-en_rev02 3/22/06 1:36 AM Page 29 SPECIAL FUNCTIONS PIP (Picture-In-Picture) PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. PIP function is available in the Component, RGB, HDMI mode. (But, it can’t adjust 480i/576i resolution of Component mode.
0323G_1-en_rev02 3/22/06 1:36 AM Page 30 SPECIAL FUNCTIONS PIP (Picture-In-Picture) Input Source Selection for Sub Picture Press the P I P I N P U T button to select the input source for the sub picture. Each press of P I P I N P U T button is pressed, each input source for the sub picture is displayed. (It is available in TV, AV1, AV2 mode.) Sub Picture Size Adjustment (PIP mode only) Press the S I Z E button to adjust the sub picture size.
0323G_1-en_rev02 3/22/06 1:36 AM Page 31 TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
0323G_1-en_rev02 3/22/06 1:36 AM Page 32 SPECIAL FUNCTIONS TELETEXT TOP Text The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block / group / page selection 1 2 3 4 With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block.
0323G_1-en_rev02 3/22/06 1:36 AM Page 33 Special Teletext Functions ? A REVEAL Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display. A SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display.
0323G_2-en_rev02 3/22/06 1:37 AM Page 34 TV MENU ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. The OSD mainly use pictures for the 42PC1RV*, 42PC3RV*. 1 Press the M E N U button and then D / E button to display each menu. 2 Press the G button and then D / E button to select a menu item. 3 Change the setting of an item in the sub or pull-down menu with F / G button.
0323G_2-en_rev02 3/22/06 1:37 AM TV MENU Page 35 Setting up TV stations AUTO PROGRAMME TUNING TEXT PIP PIP PR- Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the PR+/- or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
0323G_2-en_rev02 3/22/06 1:37 AM TV MENU Page 36 Setting up TV stations MANUAL PROGRAMME TUNING TEXT PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT Manual programme lets you manually tune and arrange the stations in whatever order you desire. LIST MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then D / Station menu. E button to select the Q.VIEW VOL 2 Press the G button and then D / programme. button and then D / E button to select Manual E button to select Storage.
0323G_2-en_rev02 3/22/06 1:37 AM Page 37 FINE TUNING ARC Normally fine tuning is only necessary if reception is poor. VCR TEXT PIP PR- PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then D / Station menu. E button to select the Q.VIEW VOL 2 3 Press the G button and then D / programme. Press the G E button to select Manual button and then D / E button to select Fine. 4 Press the F / and sound. 5 Press the O K button to store it.
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 38 Setting up TV stations ASSIGNING A STATION NAME ARC You can assign a station name with five characters to each programme number. VCR TEXT PIP PIP PR- SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then D / Station menu. E button to select the Q.VIEW VOL 2 3 Press the G button and then D / programme. Press the G button and then D / E button to select Manual E button to select Name.
0323G_2-en_rev02 3/22/06 1:38 AM Page 39 PROGRAMME EDIT ARC This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. VCR TEXT PIP PR- PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU I/II EXIT SLEEP OK Q.VIEW 1 Press the M E N U button and then D / Station menu. 2 Press the G button and then D / Programme edit.
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 40 Setting up TV stations FAVOURITE PROGRAMME This function lets you select your favourite programmes directly. LIST MENU I/II EXIT SLEEP Repeatedly press the F A V button to select stored favourite programmes. OK Q.VIEW VOL 1 2 Press the M E N U button and then D / the Station menu. Press the G button and then D / Favourite programme. E E Press the G button.
0323G_2-en_rev02 3/22/06 1:38 AM Page 41 CALLING THE PROGRAMME TABLE TEXT You can check the programmes stored in the memory by displaying the programme table. PIP PIP PR- SIZE POSTION PIP PR+ LIST PIP INPUT MENU I/II EXIT SLEEP OK A Displaying programme table Press the L I S T button to display the Programme table menu. Q.VIEW VOL The programme table appears on the screen. PR MUTE One programme table contains ten programmes as shown. 1 2 3 4 5 6 ! NOTE a.
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 42 Picture Menu Options PSM (Picture Status Memory) Dynamic Standard Mild Select this option to display with a sharp image. The most general and natural screen display status. Select this option to display with a mild image. User 1/2 Select this option to use the user-defined setting. TEXT PIP PIP PR- SIZE POSTION PIP PR+ LIST PIP INPUT I/II MENU EXIT SLEEP OK Q.VIEW VOL PR MUTE 1 Press the M E N U button and then D / the Picture menu.
0323G_2-en_rev02 3/22/06 1:38 AM Page 43 Picture Adjustment (PSM-User option) Contrast Brightness Colour Sharpness Tint TEXT Adjusts the difference between the light and dark levels in the picture. Increases or decreases amount of white in the your picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Adjusts the balance between red and green levels.
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 44 Picture Menu Options CSM (Colour Status Memory) TEXT To initialize values (reset to default settings), select the C o o l option. PIP PIP PR- Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Q.
0323G_2-en_rev02 3/22/06 1:38 AM Page 45 Manual Colour Temperature Control (CSM - User option) TEXT PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT To adjust red, green, blue to any colour temperature you prefer. LIST MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 1 Press the M E N U button and then D / the Picture menu. E 1 button to select 2 Press the G button and then D / E button to select CSM. 3 Press the G button and then D / E button to select User.
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 46 Picture Menu Options FUNCTION TEXT XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. PIP PR- PIP LIST It’s not available to use this function in RGB-PC mode. SIZE POSTION PIP PR+ PIP INPUT MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then D / the Picture menu. 2 Press the G button and then D / E button to select XD.
0323G_2-en_rev02 3/22/06 1:38 AM Page 47 ADVANCED-CINEMA TEXT Set up the TV for the best picture appearance for viewing movies. PIP PR- When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in Analog TV, AV, S-Video and Component 480i/576i mode. PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Q.
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 48 Picture Menu Options ADVANCED-BLACK LEVEL TEXT When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the screen. PIP PR- This function works in the following mode: AV (NTSC-M), SVideo (NTSC-M) or HDMI. PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then D / the Picture menu.
0323G_2-en_rev02 3/22/06 1:38 AM Page 49 RESET TEXT PIP PR- PIP SIZE LIST PIP INPUT MENU EXIT 1 Press the M E N U button and then D / the Picture menu. 2 Press the G button and then D / E E POSTION PIP PR+ I/II SLEEP button to select OK button to select Reset. Q.VIEW VOL PR MUTE 3 Press the G button to initialize the adjusted value. • Returns to the default settings PSM, CSM, XD, Advanced at the factory.
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 50 Sound Menu Options SSM (Sound Status Memory) TEXT You can select your preferred sound setting; Surround MAX, Flat, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. PIP PR- SSM lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the programme content.
0323G_2-en_rev02 3/22/06 1:38 AM Page 51 Sound Frequency Adjustment (SSM - User option) TEXT PIP PIP PR- Adjust the sound equalizer. SIZE POSTION PIP PR+ LIST MENU PIP INPUT I/II EXIT SLEEP OK 1 Press the M E N U button and then D / the SOUND menu. E button to select Q.VIEW 2 Press the G button and then D / E button to select SSM. Sound button to select User. SSM AVL Balance Speaker 3 Press the G button and then D / 4 Press the G button.
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 52 Sound Menu Options AVL (Auto Volume Leveler) TEXT PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT AVL automatically keeps on an equal volume level even if you change programmes. LIST MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then D / E button to select the SOUND menu. Q.
0323G_2-en_rev02 3/22/06 1:38 AM Page 53 BALANCE ADJUSTMENT TEXT You can adjust the sound balance of speaker to the levels you prefer. PIP PR- PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Q.VIEW VOL 1 Press the M E N U button and then D / E the SOUND menu. 2 Press the G button and then D / 3 Press the G PR button to select Sound SSM AVL Balance Speaker E button to select Balance. button and then F / G 0 button to make desired adjustment.
0323G_2-en_rev02 3/22/06 7:54 AM TV MENU Page 54 Sound Menu Options SPEAKER You can adjust the internal speaker status. TEXT PIP PR- In AV, COMPONENT, RGB and HDMI with HDMI to DVI cable, speaker and/or variable audio can be outputted even though there is no video signal. PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP If you want to use your external hi-fi stereo system, turn off the internal speakers of the set.
0323G_2-en_rev02 3/22/06 1:38 AM Page 55 STEREO/DUAL RECEPTION When a programme is selected, the sound information for the station appears after the programme number and station name disappear. INPUT TV DVD ARC VCR TEXT PIP PR- DUAL I DUAL II DUAL I+II Sends the primary broadcast language to the loudspeakers. Sends the secondary broadcast language to the loudspeakers. Sends a separate language to each loudspeaker.
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 56 Sound Menu Options NICAM RECEPTION If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I / I I button repeatedly. 1 When NICAM mono is received, you can select NICAM MONO or FM MONO.
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 57 Time Menu Options CLOCK SETUP TEXT PIP PIP PR- You must set the time correctly before using on/off time function. If current time setting is erased by a power failure or the set is unplugged, reset the clock. SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 1 Press the M E N U button and then D / select the Time menu.
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 58 Time Menu Options ON/OFF TIME TEXT The Off time automatically switches the set to standby at the preset time. PIP PR- Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Once the on time/off time is set, these functions operate daily at the preset time. Q.
0323G_2-en_rev02 3/22/06 1:38 AM Page 59 AUTO SLEEP If set to on and there is no input signal, the TV turns off automatically after 10 minutes. Time Clock Off time On time Auto sleep 1 Press the M E N U button and then D / E button to select the Time menu. DE F G OK MENU 1 2 Press the G button and then D / 3 Press the G button and then D / 4 E button to select Auto sleep. E button to select On or Off..
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 60 Special Menu Options CHILD LOCK TEXT The TV can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. PIP PIP PR- This set is programmed to remember which option it was last set to even if you turn the set off. SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 1 Press the M E N U button and then D / the Special menu.
0323G_2-en_rev02 3/22/06 1:38 AM Page 61 ISM (Image Sticking Minimization) Method A frozen of still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time. TEXT PIP PR- PIP SIZE LIST PIP INPUT MENU EXIT It’s not available to use this function in 26LC2R*, 32LC2R* models.
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 62 Special Menu Options LOW POWER TEXT This is the function to reduce the power consumption of the set. PIP PR- It’s not available to use this function in 26LC2R*, 32LC2R* models. PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Q.
0323G_2-en_rev02 3/22/06 1:38 AM Page 63 XD DEMO TEXT PIP PIP PR- SIZE POSTION PIP PR+ PIP INPUT Use it to see the difference between XD Demo on and XD Demo off. It’s not available to use this function in RGB[PC] mode. LIST MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then use D / E button to Q.VIEW VOL select the Special menu. PR MUTE 2 Press the G button and then use D / X D D e m o. 3 Press the G button to begin X D D e m o.
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 64 Screen Menu Options AUTO CONFIGURE (RGB [PC] mode only) Automatically adjusts picture position and minimizes image shaking. TEXT PIP PR- After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Auto configure This function is for the automatic adjustment of the screen position, clock, and phase.
0323G_2-en_rev02 3/22/06 1:38 AM Page 65 MANUAL CONFIGURE TEXT If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. PIP PR- PIP LIST To correct the screen size, adjust C l o c k. SIZE POSTION PIP PR+ PIP INPUT MENU EXIT I/II SLEEP This function works in the following mode : RGB[PC], RGB[DTV], HDMI (480p/576p/720p/1080i), COMPONENT (480p/576p/720p/1080i). OK Q.
0323G_2-en_rev02 3/22/06 11:57 AM TV MENU Page 66 Screen Menu Options SETTING THE PICTURE FORMAT You can watch the screen in various picture formats; S p e c t a c l e, O r i g i n a l, 4 : 3, 1 6 : 9, 1 4 : 9 Z o o m 1 and Z o o m 2. INPUT TV TV POWER INPUT DVD ARC If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
0323G_2-en_rev02 3/22/06 1:38 AM Page 67 • Zoom1 Following selection will lead you to view the picture without any alternation, while filling the entire screen. However, the top and bottom portions of the picture will be cropped. • Zoom2 Choose Z o o m 2 when you want the picture to be altered, both horizontally extended and vertically cropped. The pic ture taking a halfway trade off between alteration and screen coverage.
0323G_2-en_rev02 3/22/06 1:38 AM TV MENU Page 68 Screen Menu Options SELECTING WIDE VGA/XGA MODE TEXT PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT To see a normal picture, match the resolution of RGB mode and selection of VGA/XGA mode. LIST MENU EXIT This function works in the following mode: RGB[PC] mode. I/II SLEEP OK VGA Mode: 42PC1RV*, 42PC3RV* XGA Mode: 26LC2R*, 32LC2R* Q.VIEW Screen 1 Press the M E N U button and then use D / select the Screen menu.
0323G_2-en_rev02 3/22/06 1:38 AM Page 69 Initializing (Reset to original factory settings) This function operates in current mode. To initialize the adjusted value TEXT PIP PR- PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then D / the Screen menu. E button to select Q.VIEW VOL PR MUTE 2 3 Press the G button and then D / Reset. Ebutton to select 1 2 3 4 5 6 7 8 9 Press the G button.
0323G_2-en_rev02 3/22/06 1:38 AM Page 70 APPENDIX PROGRAMMING THE REMOTE The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode APPENDIX 1 Test your remote control.
0323G_2-en_rev02 3/22/06 1:38 AM Page 71 PROGRAMMING THE REMOTE VCRs Brand AIWA AKAI Codes Codes Brand MAGNAVOX 031 067 012 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 SAMSUNG 043 046 124 146 MARANTZ 033 023 037 031 103 039 043 129 033 MARTA MATSUI MEI MEMOREX 040 033 007 108 116 135 041 010 064 110 111 117 119 MGA MINOLTA MITSUBISHI 023 039 043 053 017 031 037 131 008 025 034 046 138 009 033 109 136 012 018 063 033 033 013 066 063 072 144 147 031 05
0323G_2-en_rev02 3/22/06 1:38 AM Page 72 APPENDIX TROUBLESHOOTING CHECKLIST The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. ■ Are batteries installed with correct polarity (+ to +, - to -)? ■ Correct remote operating mode set: TV, VCR etc.? ■ Install new batteries. ■ The remote control doesn’t work Power is suddenly turned off Is the sleep timer set? Check the power control settings.
0323G_2-en_rev02 3/22/06 1:38 AM Page 73 TROUBLESHOOTING CHECKLIST The audio function does not work. Press the V O L + / - ( o r V o l u m e ) button. ■ Sound muted? Press M U T E button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers ■ Adjust Balance in menu option.
0323G_2-en_rev02 3/22/06 1:38 AM Page 74 APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
0323G_2-en_rev02 3/22/06 1:38 AM Page 75 PRODUCT SPECIFICATIONS MODELS 32LC2R* 26LC2R-TJ 32LC2R-TJ with stand 681.0 x 542.0 x 172.0 mm 26.8 x 21.3 x 6.8 inches 811.0 x 630.0 x 235.0 mm 31.9 x 24.8 x 9.3 inches without stand 681.0 x 490.8 x 119.0 mm 26.8 x 19.3 x 4.6 inches 811.0 x 566.8 x 123.5 mm 31.9 x 22.3 x 4.9 inches with stand without stand 18.5 kg / 40.8 lbs 15.2 kg / 33.5 lbs 21.9 kg / 48.2 lbs 18.5 kg / 40.
0323G_3-en_rev02 3/22/06 1:33 AM Page 76 APPENDIX EXTERNAL CONTROL DEVICE SETUP Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the TV’s functions externally. Connect the serial port of the control device to the RS-232C jack on the TV back pane l.RS232C connection cables are not supplied with the TV.
0323G_3-en_rev02 3/22/06 1:33 AM Page 77 RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) RXD TXD GND DTR DSR RTS CTS PC TV SET 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 3-Wire Configurations(Not standard) TXD RXD GND DSR DTR CTS RTS RXD TXD GND DTR DSR RTS CTS PC TV SET 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 TXD RXD GND DTR DSR RTS CTS Set ID - Use this function to specify a set ID number. - Refer to ‘Real Data Mapping 1’. See page 81.
0323G_3-en_rev02 3/22/06 1:33 AM Page 78 APPENDIX Command Reference List COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power k a 0~1 02. Aspect Ratio k c * 03. Screen Mute k d 04. Volume Mute k e COMMAND1 COMMAND2 DATA (Hexadecimal) 15. Balance k t 0 ~ 64 16. Colour Temperature k u 0~3 0~1 17. Red Adjustment k v 0 ~ 3C 0~1 18. Green Adjustment k w 0 ~ 3C 05. Volume Control k f 0 ~ 64 19. Blue Adjustment k $ 0 ~ 3C 06. Contrast k g 0 ~ 64 20.
0323G_3-en_rev02 3/22/06 1:33 AM Page 79 0 5 . Volume Control (Command2:f) 0 1 . Power (Command2:a) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Data 1 : Power On Acknowledgement [a][ ][Set ID][ ][OK][Data][x] To show Power On/Off. To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 Refer to ‘Real data mapping 1 ’. See page 81.
0323G_3-en_rev02 3/22/06 1:33 AM Page 80 APPENDIX 10. Sharpness (Command2:k) 15. Balance (Command2:t) To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. To adjust balance. You can also adjust balance in the SOUND menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 Data Min: 0 ~ Max: 64 Refer to ‘Real data mapping 1’. See page 81. Refer to ‘Real data mapping 1’. See page 81.
0323G_3-en_rev02 3/22/06 1:33 AM Page 81 20. Abnormal State (Command2:z) 24 . Orbiter Pixel Setting (Command1:j, Command2:s) To recognize an abnormal state. To adjust pixel number in orbiter function. This feature is not available for all models. This feature is not available for all models. Transmission [k][z][ ][Set ID][ ][FF][ ][Cr] Transmission [j][s][ ][Set ID][ ][Data][Cr] Data FF: Read Data Min: 1 ~ Max: 3 Acknowledgement [z][ ][Set ID][ ][OK][Data][x] Refer to ‘Real data mapping 1’.
0323G_3-en_rev02 3/22/06 1:33 AM Page 82 APPENDIX 27. Key (Command1:m, Command2:c) 29. Input select (Command1:x, Command2:y) To send IR remote key code. To adjust input source for sub picture in PIP mode Transmission [m][c][ ][Set ID][ ][Data][Cr] Transmission [x][y][ ][Set ID][ ][Data][Cr] Data: Structure Data: Key code - Refer to page 84. Acknowledgement [c][ ][Set ID][ ][OK][Data][x] MSB 0 28.
0323G_3-en_rev02 3/22/06 1:34 AM Page 83 IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
0323G_3-en_rev02 3/22/06 1:34 AM Page 84 APPENDIX REMOTE CONTROL IR CODES APPENDIX 84 (Hexa) Code Function Note Code Function 0F TV R/C Button 71 GREEN R/C Button 0B INPUT R/C Button 63 YELLOW R/C Button 08 POWER R/C Button (Power On/Off) 61 BLUE R/C Button C4 POWER ON Discrete IR Code (Only Power On) 02 VOL + R/C Button C5 POWER OFF Discrete IR Code (Only Power OFF) 03 VOL - R/C Button 60 PIP R/C Button 00 PR + R/C Button 0E SLEEP R/C Button 01 PR - R/C Bu
0323G_3-en_rev02 3/22/06 1:34 AM Page 85
0323N_3-en_rev00 3/24/06 5:24 PM Page 86
