LCD TV PLASMA TV OWNER'S MANUAL LCD TV MODELS PLASMA TV MODELS 26LC2R * 32LC2R * 42PC3RV * Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. P/NO : 38289U0577G (0608-REV01) Printed in Korea www.lg.
577Gen-1 06/8/24 8:33 AM Page 1 WARNING / CAUTION WARNING / CAUTION To prevent fire this or shock hazards, do not expose to rain product moisture. or FCC NOTICE TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. Class B This ply device digital has been tested and found to equipment with the limits for a Class B digital device, com- pur- suant to Part 15 of the FCC Rules.
577Gen-1 06/8/24 8:33 AM Page 2 SAFETY INSTRUCTION IMPORTANT SAFETY INSTRUCTIONS instructions shall be Important safety booklet WARNIG or supplied sheet, or provided with each apparatus. This information shall be given in operating instructions in an instruction for installation be located before any a separate for use and with the apparatus. This information shall be in given a language acceptable to the country where the apparatus is intended to be used.
77Gen-1 06/8/24 8 8:33 Use or AM 3 Page only with the cart, stand, tripod, bracket, specified by the manufacturer, or sold with the apparatus. When a cart is used, caution when moving the cart/apparatus combination to avoid 9 injury from being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. as tip-over. this apparatus during lightning storms when unused for long periods of time.
577Gen-1 06/8/24 8:33 AM Page 4 CONTENTS WARNING/CAUTION............................1 SPECIAL FUNCTIONS SAFETYINSTRUCTIONS......................2-3 PIP/Twin Picture INTRODUCTION -WatchingPIP/TwinPicture.............................31 -TVProgramSelectionforPIP.........................31 Selecting an Input Signal Source - Accessories......................................................7 CONTE Controls/ConnectionOptions....................8-11 RemoteControlKeyFunctions....................
577Gen-1 06/8/24 8:33 AM Page 5 Lock TV MENU On Screen Menus Selection and Adjustment . . . . 33 SettingUpYourPassword................................62 LockSystem....................................................63 SetPassword..................................................63 Setup(Channel) AutoProgram:ChannelSearch........................34 Manual Program : Adding /Deleting Channels 35 FineTuningAdjustment...................................36 FavoriteChannelssetup.......................
577Gen-1 06/8/24 8:33 AM 6 Page INTRODUCTION What is a Plasma TV ? The Plasma TV is the best way to achieve flat Using plasma panel displays with excellent image quality and large screen sizes that are easily viewable. The Plasma TV can be thought of as a descendant of the neon lamp and or a series of fluorescent lamps. INTRODUC pixels, which are comprised of three sub-pixels, corresponding to the colors red, green, and blue.
577Gen-1 06/8/24 8:33 AM Page 7 ACCESSORIES Ensure that the following tact the dealer where you accessories are purchased the included with your product. product. If an accessory is missing, please con- INPUT TV DVD ARC PIPCH- TV POWER INPUT VCR CAPTON PIP SIZE PIPCH+ MEMORY/ERASE POSTION PIP INPUT MENU MTS EXIT SLEEP ENTER REVIEW Owner's Manual VOL CH MUTE 123 456 789 1.5V 1.
577Gen-1 06/8/24 8:33 AM 8 Page INTRODUCTION CONTROLS This is the front This is a panel of models 42PC3RV* TVs. simplified representation of the front panel. Here shown may be somewhat different from your TV. Front Panel Controls INTRODUC CHANNEL Buttons CH VOLUME Buttons VOL ENTER ENTER Button MENU MENU Button INPUT INPUT Button ON/OFF Button Remote Control Sensor Power Standby Indicator Illuminates red in standby mode. Illuminates white when the set is switched 8 on.
06/8/24 577Gen-1 8:33 AM 9 Page CONNECTION OPTION This manual explains the features available on the 42PC3RV * .
577Gen-1 06/8/24 8:33 AM Page 10 INTRODUCTION CONTROLS This is the front This is a panel of models 26/32LC2R* TVs. simplified representation of the front panel. Here shown may be somewhat different from your TV. Front Panel Controls INTRODUC CHANNEL Buttons CH VOLUME Buttons VOL ENTER Button ENTER MENU MENU Button INPUT INPUT Button R ON/OFF Button Remote Control Sensor Power Standby Indicator Illuminates red in standby mode.
06/8/24 577Gen-1 8:33 AM Page 11 CONNECTION OPTIONS This manual explains the features available the 26/32C2R * on . Back Connection Panel 26LC2R* 32LC2R* AUDIO Input Connections AUDIO sound from available for listening stereo external device. are an VIDEO VIDEO Input Connects the video device.
577Gen-1 06/8/24 8:33 AM Page 12 INTRODUCTION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control POWER Turns your TV or TV INPUT INPUT or off, depending any other sensor on programmed equipment the TV. on INPUT mode. on TV Returns to the TV mode. If you press the button once, the input source OSD will appear on screen as shown.
577Gen-1 06/8/24 8:33 AM MODE PIP SIZE POSITION 13 Page Selects the remote Switches the sub Adjusts the sub Moves the sub PIPCH-/+ Selects operating picture PIP, picture picture. DW mode. G size. G G p.31 p.32 p.32 channel for the sub a mode: TV, VCR, DVD. picture. G INTRODUC p.
577Gen-1 06/8/24 8:33 AM 14 Page INSTALLATION UNFOLDING THE STAND BASE 1 Place the set with the screen down soft cloth on a cushion or (For 42PC3RV*) facing as shown. Before unfolding the stand, please make sure two locks (A) on the bottom of the stand push outward. INSTAL O Pull the stand out 2 as (A) shown. After unfolding the stand, please insert tighten the screws (provided as parts of the product) in the holes (B) on and the bottom of the stand.
577Gen-1 06/8/24 8:33 AM 15 Page STAND INSTALLATION Carefully place side down will on a the product (For 32LC2R*) screen cushioned surface that protect product and screen from damage. Place the as product stand on the product shown. Install the 4 bolts of the product securely, in the holes INSTAL O in the back provided.
577Gen-1 06/8/24 8:33 AM Page 16 INSTALLATION DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4inches on each side from the wall. 26/32LC2R* 42PC3RV* 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches INSTAL O R CAUTION G Ensure adequate ventilation by following the clearance recommendations. Here shown may be somewhat different from your TV.
577Gen-1 06/8/24 8:33 AM 17 Page ATTACHING THE TV TO A WALL We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward potentially causing injury Caution: Please make or sure damaging the direction, product. that children don't climb on or hang from the TV.
577Gen-1 06/8/24 8:33 AM Page 18 INSTALLATION BASIC CONNECTION 1 Connect the cables After connecting the To connect INSTAL O 18 2 as Arrange an necessary. cables additional the cable as (For 42PC3RV*) neatly, arrange the cables to the Cable Holder. equipment, shown. see the Connections & Setup section.
577Gen-1 06/8/24 8:33 AM Page 19 WIRE ARRANGEMENT (Only 26/32LC2R*) This function 1 explains the features available Connect the cables After connecting To connect an as on the 26/32LC2R*. necessary. the cables additional neatly, arrange the cables to the Cable Holder. equipment, see the External equipment Connections section. INSTAL O CABLE HOLDER 2 Install the CABLE MANAGEMENT as shown.
577Gen-1 06/8/24 8:33 AM Page 20 CONNECTIONS & SETUP 'Connections & Setup' part explains the features available the 26/32LC2R*. on ANTENNA CONNECTION Wall Antenna Socket For or Outdoor Antenna without optimum picture quality, adjust a Cable Box Connections. antenna direction if needed.
577Gen-1 06/8/24 8:33 AM Page 21 VCR SETUP To avoid picture If the 4:3 screen. picture This does not When noise ( interference ) , leave format is used; the fixed adequate an images on distance between the VCR and TV the sides of the phenomenon is common to all manufactures the product bearing this phenomenon. screen may remain visible on the and in consequence the manufactures warranty cover connecting with an antenna 1.
577Gen-1 06/8/24 8:33 AM 22 Page VCR SETUP When connecting with S-Video cable an 1. How to connect VCR ANT IN Connect the S-VIDEO 1 S-VIDEO input on Connect the audio 2 input jacks on output of the VCR to the IN SANT OUT the set. EO OUT SW CH OUT (AUD(L)VEO 34 outputs of the VCR to the A U D I O COMPONENT IN V DEO AUDIO 1 the set. 2 2 1 AV OUT 2. How to CONETIS&UP Insert use video tape into the VCR and press PLAY a on the VCR.
577Gen-1 06/8/24 8:33 AM Page 23 DVD SETUP When with connecting a component cable 1. How to connect outputs ( Y, PB, Connect the video 1 COMPONENT IN VIDEO2 Match the jack PR ) jacks on B R (R) Connect the audio outputs of the COMPONENT IN AUDIO2 2. How to Turn on Select button DVD to the jacks on the set. AV OUT the DVD insert player, Component 2 input a DVD.
577Gen-1 06/8/24 8:33 AM 24 Page CONNECTIONS & SETUP When connecting with a HDMI cable 1. How to connect Connect the HDMI 1 HDMI IN jack output of the DVD to the the set. on (PC/DTV) No 2 2. How to separated AUDIO IN (RGB) UDOOUT input source with using 1 the INPUT button the remote control. Refer to the DVD CONETIS&UP REMOTE CONTROL IN use Select HDMI on audio connection is necessary. HDMI IN player's manual for operating DVD instructions.
577Gen-1 06/8/24 8:33 AM 25 Page HDSTB SETUP When with connecting a component cable 1. How to connect outputs ( Y, PB, Connect the video 1 box to Match PR ) of the digital set top the COMPONENT IN VIDEO2 jacks on the set. the jack colors (Y blue, and PR green, PB red). = Connect the audio 2 = Set-top R AUDIO (R) (L) Box = output of the digital set-top box the COMPONENT IN AUDIO2 2. How to B Digital jacks on 2 1 to the set.
577Gen-1 06/8/24 8:33 AM Page 26 CONNECTIONS & SETUP When connecting with a D-sub 15 pin cable 1. How to connect Digital Connect the RGB 1 output of the digital set-top box the RGB IN ( PC DTV ) Connect the audio 2 AUDIO 2. How to Turn on ( Refer IN RGB ) ( CONETIS&UP on jack RGB-DTV OUTPUT to the 1 2 the set. the digital set-top box. to the owner's manual for the button (L) the set.
577Gen-1 06/8/24 8:33 AM 27 Page PC SETUP This TV When and provides Plug connecting Play capability, meaning with a D-sub 15 that the PC adjusts automatically to the TV's settings. pin cable 1. How to connect AUDIO Connect the RGB 1 ( PC DTV ) jack output of the on RGB-PC OUTPUT PC PC to the RGB IN the set. 2 Connect the PC audio 2 ( RGB ) 2. How to Turn on jack on output to the AUDIO IN 1 the set. use REMOTE CONTROL IN AUDIO IN (RGB) the PC and the set.
577Gen-1 06/8/24 8:33 AM Page 28 CONNECTIONS & SETUP ! NOTE get the the best picture quality, adjust the PC graphics card to 640x480, 60Hz (42PC3RV*) /1360x768, 60Hz (26/32LC2R*). G To G DOS mode may HDMI to DVI Cable is in use. Depending on not work if a the graphics card, G When Source Devices connected with HDMI TV SET Resolution ( 480p, 720p, 1080i) and TV SET Display fit EIA/CEA-861-B Specification to Screen.
577Gen-1 06/8/24 8:33 AM 29 Page BASIC OPERATION TURNING THE TV ON First, 1 connect power cord correctly. At this moment, the TV switches to In mode to turn TV standby CH D / E button INPUT, CH + -, on, mode. press the , INPUT , INPUT press the POWER, TV, Number(0~9)button on the remote on the TV standby or control and then the TV will switch TV TV POWER INPUT DVD on.
577Gen-1 06/8/24 8:33 AM 30 Page BASIC OPERATION ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown First select your the on in the selected screen Press the M E N U button and then ton to select the BASICOPERTN Special use D or E but- menu. Press the G button and then use D or E button to use D or E button to select Language. Press the G button and then select your desired language.
577Gen-2 06/8/24 8:21 AM Page 31 SPECIAL FUNCTIONS PIP lets you view 2 different inputs (sources) will be large, and the other Twin Picture mode splits the One source sources to be shown half the screen. on screen the TV 480i resolution of Each press of PIP access changes your TV screen will show a images, allowing at the time. Each same at the two time. image. picture is given source HDMI mode.
577Gen-2 06/8/24 8:21 AM Page 32 SPECIAL FUNCTIONS Sub Picture Size Press the SIZE button to PIP / Twin Picture Adjustment (PIP adjust the sub picture mode only) INPUT TV DVD ARC VCR size. CAPTION PIP CH- With SIZE button in PIP mode, sub picture is PIP SIZE PIP CH+ MEMORY/ERASE the Sub Picture (PIP mode only) Press the POSITION button. Repeatedly SPECIALFUNTO/WR 32 POSTION PIP INPUT adjusted.
577Gen-2 06/8/24 8:21 AM Page 33 TV MENU ON SCREEN MENUS SELECTION AND Your TV's OSD ( On Screen Display ) may differ 1 Press the MENU button and then 2 Press the G button and then Channel use use D slightly or from what is shown in this manual. E button to select the each DEFG button to Picture menu ADJUSTMENT display menu. the available menus.
577Gen-2 06/8/24 8:21 AM TV MENU 34 Page SETUP (CHANNEL) AUTO PROGRAM: CHANNEL SEARCH Auto Program nels in your There are can use should be used to memorize all the active chan- area before you two ways of are storing able to use the TV. channels in the TV's memory. You either. MEMORY/ERASE One is called AUTO PROGRAM and the other is called MANUAL MENU MTS EXIT SLEEP PROGRAM. ENTER In AUTO PROGRAM mode, the TV will memorize the channels in numerical order.
577Gen-2 06/8/24 8:21 AM 35 Page MANUAL PROGRAM: ADDING/DELETING CHANNELS You can add or delete channels from the channel scan MEMORY/ERASE manually. MENU EXIT MTS SLEEP ENTER REVIEW VOL CH MUTE Use the CH- 1 + you want to add or or 123 NUMBER buttons to select the channel number 456 delete. 789 * 2 Press the MEMORY ERASE button. 3 Press the MEMORY ERASE button to select On 4 Press the ENTER button. or Off 0 FCR .
577Gen-2 06/8/24 8:21 AM TV MENU 36 Page SETUP FINE TUNING Normally fine tuning is ADJUSTMENT only remove from necessary if reception is poor. channel, reprogram the tuning channel with Auto program or Manual Program. To fine (CHANNEL) a finely-tuned MEMORY/ERASE If finely-tuned channel is memorized, number changes to yellow.
577Gen-2 06/8/24 8:21 AM 37 Page FAVORITE CHANNELS SETUP Favorite Channels is scan the TV to scan convenient feature that lets you Review) through having quickly MEMORY/ERASE MTS MENU EXIT to wait for SLEEP all the in-between channels. ENTER favorite channel, press the FCR (Favorite Channel button repeatedly. The 8 favorite channels appear on To tune to the a up to 8 channels of your choice without screen a in numerical order.
577Gen-2 06/8/24 8:21 AM Page TV MENU 38 PICTURE ADJUSTMENT AUTO PICTURE CONTROL (APC) PIP CH- APC adjusts the TV for the best preset value in the APC menu , In the User1 the contrast, , based Time Daylight Optimum Night picture quality at the factory picture on are PIP INPUT the program category. Settings and PIP CH+ appearance. Select the are preset for optimum MEMORY/ERASE adjustable.
577Gen-2 06/8/24 8:21 AM Page 39 MANUAL PICTURE CONTROL (APC-USER OPTION) PIP CH- Adjust the picture ing situations. appearance to suit your preference PIP CH+ PIP INPUT and view- MEMORY/ERASE MTS MENU EXIT SLEEP ENTER REVIEW VOL CH MUTE Picture APC 1 Press the MENU button and then D the Picture or E button to select ACC XD menu. Advanced Reset Press the G button and then D 2 E button to select A P C.
577Gen-2 06/8/24 8:21 TV MENU AM Page 40 PICTURE ADJUSTMENT AUTO COLOR TEMPERATURE CONTROL Choose one of three automatic color to enhance hotter colors such intense colors with more as red, adjustments. or Set to set to cool to (ACC) warm see less blue. MEMORY/ERASE MENU EXIT MTS SLEEP ENTER REVIEW VOL CH MUTE Picture APC ACC XD 1 2 Press the M E N U button and then D the Picture or E button to select Advanced Reset menu.
577Gen-2 06/8/24 8:21 AM Page 41 MANUAL COLOR TEMPERATURE CONTROL (ACC You ing can the - USER also adjust user menu. OPTION) the detailed settings (Red, Green, Blue) by select- MEMORY/ERASE MTS MENU EXIT SLEEP ENTER REVIEW VOL CH MUTE Picture 1 Press the M E N U button and then D the Picture or E button to select APC ACC menu. XD Advanced Reset 2 Press the G button and then D E button to select ACC or .
577Gen-2 06/8/24 8:21 AM TV MENU Page 42 PICTURE ADJUSTMENT XD PIP CH- PIP CH+ PIP INPUT XD is LG Electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. MEMORY/ERASE MENU EXIT When selecting APC options (Daylight, Optimum time), XD is automatically changed to Auto. When selecting APC options (User 1 and User and SLEEP Night ENTER 2), you can choose the Auto / Manual.
577Gen-2 06/8/24 8:21 AM Page 43 ADVANCED-CINEMA MODE SETUP PIP CAPTION Set up the TV for the best picture appearance for viewing PIP CH- SIZE PIP CH+ POSTION PIP INPUT movies. When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for MEMORY/ERASE display. This feature operates 480i mode.
577Gen-2 06/8/24 8:21 AM TV MENU Page 44 PICTURE ADJUSTMENT ADVANCED-BLACK LEVEL Adjusting the contrast and the the black level of the brightness of the screen using screen. PIP CAPTION PIP CH- This feature operates only in AV (NTSC-M) or SIZE PIP CH+ POSTION PIP INPUT HDMI mode. MEMORY/ERASE MENU EXIT MTS SLEEP ENTER 1 Press the MENU button and then D or E button to select REVIEW the Picture VOL menu.
577Gen-2 06/8/24 8:21 AM Page 45 RESET PIP CH- quickly reset all the Picture original factory preset values. Use to menu options PIP CH+ PIP INPUT to their MEMORY/ERASE MENU EXIT MTS SLEEP ENTER REVIEW VOL CH MUTE 123 456 789 Picture 1 Press the MENU button and then D the Picture or E button to select APC ACC menu. XD Advanced Reset 2 Press the G button and then D or E button to select Res et. DE FG MENU 1 3 Press the G button to initialize the adjusted value.
577Gen-2 06/8/24 8:21 AM 46 Page TV MENU AUDIO ADJUSTMENT DIGITAL AUTO SOUND PROCESSING (DASP) preferred sound setting; Surround Max, Flat, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. You can select your MEMORY/ERASE MENU EXIT DASP lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the MTS SLEEP ENTER program content.
577Gen-2 06/8/24 8:21 AM 47 Page SOUND FREQUENCY (DASP Adjust - USER the sound ADJUSTMENT OPTION) equalizer. MEMORY/ERASE MENU MTS EXIT SLEEP ENTER REVIEW VOL CH Sound 1 Press the MENU button and then D the Sound E button to select or DASP AVL menu. Balance 0 Speaker 2 Press the G button and then D or E button to select D A S P. DE 3 Press the G button and then D or E button to select User FG MENU 1 . Sound DASP Surround MAX G 4 Press the G button.
577Gen-2 06/8/24 8:21 AM TV MENU Page 48 AUDIO ADJUSTMENT AUTO VOLUME LEVELER AVL automatically keeps change program. on an equal (AVL) volume level even if you Sound DASP AVL Balance 1 TVMENU / 2 Press the MENU button and then D the Sound 48 0 Speaker E button to select menu. Press the G button and then D or DE E button to select A V L. FG MENU 1 Sound 3 Press the G button and then D or AUDIOJSTMEN or Off or E button to select O n DASP AVL G Balance .
577Gen-2 06/8/24 8:21 AM BALANCE Adjust room the Page 49 ADJUSTMENT left/right sound of speaker to suit your taste and situations. MEMORY/ERASE MENU EXIT MTS SLEEP ENTER REVIEW VOL CH MUTE Sound DASP 1 Press the MENU button and then D the Sound or E button to select AVL Balance menu. 0 Speaker 2 Press the G button and then D or E button to select Balance . DE FG MENU 1 3 Press the G button and then F desired or G button to make Sound adjustment.
577Gen-2 06/8/24 8:21 AM TV MENU Page 50 AUDIO ADJUSTMENT TV SPEAKERS ON/OFF SETUP Turn the TV speakers Feature turns the TV off if using external audio equipment. Speakers option On or Off. PIP CH- PIP CH+ MEMORY/ERASE MENU EXIT PIP INPUT MTS SLEEP ENTER REVIEW Sound 1 Press the M E N U button and then D or DASP E button to select AVL the Sound menu. Balance 0 Speaker 2 Press the G button and then D Speaker or E button to select .
06/8/24 577Gen-2 8:21 AM Page 51 STEREO/SAP BROADCASTS SETUP The TV receive MTS stereo programs and any SAP can (Secondary Audio that Program) accompanies gram; if the broadcaster transmits in addition to the original one. Mono: The Signal Stereo: The Signal mono 1 signal MEMORY/ERASE right speakers. MENU EXIT MTS SLEEP mono. primary language is heard from left and right speakers. is heard from left and right speakers ENTER mode is stereo.
577Gen-2 06/8/24 8:21 AM Page 52 TV MENU TIME SETTING AUTO CLOCK SETUP The time is set time provided by Set the clock from automatically The PBS channel a PBS channel signal. includes information for the current signal the broadcasting manually station. if the current time is set incorrectly by MEMORY/ERASE MENU MTS EXIT the auto clock function. SLEEP ENTER REVIEW VOL CH MUTE 123 1 Press the M E N U button and then D or E button to select 456 the Time r menu.
577Gen-2 06/8/24 8:21 AM Page 53 MANUAL CLOCK SETUP If the current time setting is wrong, reset the clock manually. MEMORY/ERASE MENU MTS EXIT SLEEP ENTER REVIEW VOL CH MUTE 123 456 1 Press the MENU button and then D select the Tim er or E button to 789 menu. 0 * FCR Timer Clock 2 3 Press the G button and then D Clock or E button to select Off timer On timer . Press the G button and then Auto off use D or E button to select Manual.
577Gen-2 06/8/24 8:22 AM TV MENU Page 54 TIME SETTING ON/OFF TIMER SETUP The timer function operates only if the current time has been set. The Off-Timer function overrides the On-Timer function if are both set to the same they time. MEMORY/ERASE The TV must be in standby mode for the On-Timer to work. SLEEP If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert standby to MTS MENU EXIT ENTER mode.
7Gen-2 06/8/24 8:22 AM Page 55 AUTO OFF If set to cally on CAPTION PIP CH- and there is no input signal, PIP SIZE PIP CH+ POSTION PIP INPUT the TV turns off automatiMEMORY/ERASE after 10 minutes. MENU EXIT MTS SLEEP ENTER REVIEW VOL CH MUTE 123 456 Timer 1 Press the MENU button and then use D or Clock E button Off timer to select the Timer menu. On timer Auto off 2 Press the G button and then use D or E button to select Auto Off.
577Gen-2 06/8/24 8:22 AM TV MENU 56 Page TIME SETTING SLEEP TIMER MEMORY/ERASE MENU EXIT The Sleep Timer turns the TV off at the Note that this setting preset time. MTS SLEEP ENTER is cleared when the TV is turned off. REVIEW VOL 1 Press the SLEEP button the - timer 2 repeatedly to select the number of minutes. First option appears on the screen, followed by the following sleep options : 10, 20, 30, 60, 90, 120, 180, and 240 minutes.
577Gen-2 06/8/24 8:22 AM Page TV MENU 57 SPECIAL FEATURES KEY LOCK The TV be set can so that the remote control is needed to con- trol it. This feature locking This TV is set to can be used to prevent unauthorized panel controls. viewing by MEMORY/ERASE out the front to remember which programmed even MENU MTS EXIT option it was SLEEP last ENTER if you turn the set off.
577Gen-2 06/8/24 8:22 AM TV MENU SPECIAL FEATURES ( IMAGE ISM - for 42PC3RV* A frozen still the Use the STICKING MINIMIZATION) METHOD only from picture for screen image. on 58 Page a PC/video game displayed on a ghost any fixed image prolonged periods unique method to will result in minimize our screen. MEMORY/ERASE MTS MENU EXIT SLEEP ENTER 1 Press the MENU button and then to select the Special D use or E button menu.
06/8/24 577Gen-2 8:22 AM Page 59 LOW POWER - for 42PC3RV* only Low power reduces the plasma display power consumption. MEMORY/ERASE MENU EXIT MTS SLEEP ENTER REVIEW VOL CH MUTE 123 456 789 Special 1 Press the MENU button and then to select the Special use D or Language E button Key lock ISM Method menu. Low power Set ID Caption/Text Parental 2 Press the G button and then select Low power use D or E button to XD Demo .
577Gen-2 06/8/24 8:22 AM Page TV MENU 60 SPECIAL FEATURES CLOSED CAPTIONS Closed is a process which converts the audio television portion program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration captioning of 1. Poor reception a conditions ? are encountered: IGNITION: Picture may black spots, of television programs. Usually Closed Captions lamps, dialogue and narration of television programs.
577Gen-2 06/8/24 8:22 AM Page 61 XD DEMO PIP CH- Use it to see the difference between XD Demo on PIP CH+ PIP INPUT and XD Demo off. MEMORY/ERASE It's not available to use this function in RGB[PC] mode. MTS MENU EXIT SLEEP ENTER REVIEW VOL CH MUTE 123 456 789 Special 1 Press the MENU button and then select the Special use D or Language E button to Key lock ISM Method menu.
577Gen-2 06/8/24 8:22 AM TV MENU 62 Page LOCK Parental Control can ADJUSTMENT be used to block The Parental Control Function ble to the station. The default viewing viewing based sources. on the is to allow all programs to be viewed. : 1. Set 2. is used to block program and other ratings broadcasting setting can be blocked by choosing the type of the program and the categories. It is also possiblock all program viewing for a time period.
577Gen-2 06/8/24 8:22 AM 63 Page LOCK SYSTEM Special Enables or disables the scheme you set up blocking previously. Language Key lock ISM Method Low Power 1 Press the M E N U button and then to select the Special use D or E button Set ID Caption/Text menu. Parental XD Demo 2 Press the G button and then to select Parental 3 the D or E button DE FG MENU 1 Press the G button and then to select Lock use . use the D or Parental E button Lock Set .
577Gen-2 06/8/24 8:22 AM 64 Page TV MENU LOCK ADJUSTMENT MOVIE RATING Blocks movies fied, the so according (MPAA) to the movie ratings limits children cannot view certain movies. You limit ratings ratings above movie ratings speci- can set out all the movies with the by blocking specified level. Keep in mind that the limit only applies to movies shown on TV, a not TV programs, such as soap operas.
577Gen-2 06/8/24 8:22 AM 65 Page AGE BLOCK TV Rating Based your on the family General ratings, blocks certain TV programs that you and Special do not want to view. Language Key lock ISM Method TV Rating Children Low Power Set ID Prevents children from to the according apply to other watching certain children's TV programs, ratings limit set. The children rating does not Parental XD Demo TV programs.
577Gen-2 06/8/24 8:22 TV MENU AM 66 Page LOCK ADJUSTMENT CONTENT BLOCK Special 1 Press the M E N U button and then select the Special use D or Language E button to Key lock menu. ISM Method Low Power 2 Press the G button and then the D use or Set ID E button to Caption/Text select Parental. Parental XD Demo 3 Press the G button and then select Content block the D use or E button to DE FG MENU .
577Gen-2 06/8/24 8:22 AM 67 Page CANADIAN TV Rating English Selecting TV canadian French Rating Selecting english language rating system. canadian french Special language rating system. Language Key lock ISM Method Low Power Set ID 1 2 Press the MENU button and then select the use D or E button to Caption/Text Parental Special menu. Press the G button and then select Parental XD Demo use the D or DE E button to FG MENU 1 .
577Gen-2 06/8/24 8:22 AM Page TV MENU 68 SCREEN AUTO CONFIGURE ADJUSTMENT MODE (RGB [PC] ONLY) PIP CH- Automatically adjusts picture position shaking. and minimizes Although the image is still not correct, your properly but needs further adjustment. set is PIP CH+ PIP INPUT image functioning MEMORY/ERASE MENU MTS EXIT SLEEP ENTER REVIEW VOL CH MUTE 123 456 789 Screen config. Auto Manual config.
577Gen-2 06/8/24 8:22 AM 69 Page MANUAL CONFIGURE PIP CH- If the if characters PIP CH+ PIP INPUT isn't clear after auto picture are adjustment and especially trembling, adjust the picture phase still manually. MEMORY/ERASE This function works in the following mode : RGB-PC (60Hz), RGB-DTV (60Hz), Component 480p/720p/1080i (60Hz), HDMI 480p/720p/1080i (60Hz).
577Gen-2 06/8/24 8:22 AM TV MENU Page 70 SCREEN ADJUSTMENT ASPECT RATIO CONTROL (ARC) This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the Component (480p,720p,1080i), RGB-PC/DTV, 4:3 or picture is to be HDMI DTV input INPUT TV displayed.
577Gen-2 06/8/24 8:22 AM 71 Page SELECTING WIDE VGA/XGA MODE To see a normal picture, MEMORY/ERASE match the resolution of RGB mode and MTS MENU EXIT SLEEP selection of VGA/XGA mode. ENTER This function works in the following mode: RGB[PC] mode. REVIEW VOL CH VGA Mode: 42PC3RV MUTE XGA Mode: 26/32LC2R 1 Press the M E N U button and then to select the Screen use D or E button Screen config. Auto menu. Manual config.
577Gen-2 06/8/24 8:22 AM TV MENU Page 72 SCREEN INITIALIZING ADJUSTMENT (RESET TO ORIGINAL FACTORY SETTINGS) This function operates in current mode. To initialize the adjusted PIP CH- PIP CH+ PIP INPUT value. MEMORY/ERASE MTS MENU EXIT SLEEP ENTER REVIEW VOL CH MUTE 123 456 789 Screen 1 Press the MENU button and then select the Screen use D or config. Auto E button to Manual config. VGA mode menu.
577Gen-2 06/8/24 8:22 AM Page 73 APPENDIX EXTERNAL CONTROL DEVICE SETUP Connect the RS-232C (serial port) input jack to an external control device (such as a computsystem) to control the product's functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product. er or an A/V control RS-232C REMOTE CONTROL Setup A DIOIN RGB) R S-232C IN CONTRO SERV CE) PC Type of Connector; No.
577Gen-2 06/8/24 8:22 AM Page 74 APPENDIX RS-232C Configurations Configurations ( Standard 7-Wire RS-232C cable ) PC TV RXD 2 3 3-Wire TXD Configurations ( Not standard ) PC TV RXD 2 3 TXD TXD 3 2 RXD TXD 3 2 RXD GND 5 5 GND GND 5 5 GND DTR 4 6 DSR DTR 4 6 DTR DSR 6 4 DTR DSR 6 4 DSR RTS 7 8 CTS RTS 7 7 RTS CTS 8 7 RTS CTS 8 8 CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID Use this function to Refer to 'Real Data specify a Mappin
577Gen-2 06/8/24 8:22 AM Page 75 Command Reference List COMMAND1 COMMAND2 k 01. Power DATA (Hexadecimal) a 0~1 16. Color DATA COMMAND1 COMMAND2 k u 0~3 k v 0~3C(or50) k w 0~3C(or50) k $ 0~3C(or50) Temperature (Hexadecimal) Ratio k c 1~5 17. Red 03. Screen Mute k d 0~1 18. Green 04. Volume Mute k e 0~1 19. Blue 05. Volume Control k f 0~64 20 Abnormal Status k z 06. Contrast k g 0~64 21. ISM Method j p 0~3 07. k h 0~64 22.
577Gen-2 06/8/24 8:22 AM 76 Page APPENDIX 01. Power 05. (Command2:a) To control Power On/Off of the TV. Transmission Volume To adjust You [k][a][ ][Set ID][ ][Data][Cr] Power Off : Data 1 : can Power On also Transmission Acknowledgement [a][ ][Set ID][ ][OK][Data][x] volume with the volume buttons adjust [k][f][ ][Set ID][ ][Data][Cr] DataMin:0~Max:64 To show Power On/Off. Transmission (Command2:f) volume. remote control.
577Gen-2 06/8/24 10. 8:22 AM Page 77 15. Balance Sharpness (Command2:k) To adjust You can the also screen adjust sharpness Transmission To sharpness. in the Picture [k][k][ ][Set ID][ ][Data][Cr] 1'. See page 78. mapping Screen (On 16. Color Display) on/off when To con- trolling remotely. Transmission [k][l][ ][Set ID][ ][Data][Cr] To panel If you're not on/off, 13.
577Gen-2 06/8/24 8:22 AM 78 Page APPENDIX 20. Abnormal State To recognize an available for all Transmission 24 (Command2:z) abnormal state. (This Orbiter Pix el Setting . feature is not To models.) [k][z][ ][Set ID][ ][FF][ ][Cr] Transmission Data 0: Normal (Power Data 2: Turn the TV off on and signal exist) by sleep Data 4: Turn the TV off by 25 To RS-232C function adjust picture position shaking automatically.
577Gen-2 06/8/24 8:22 27. Channel Add AM 79 Page Del (Command1:m, Command2:b) To add and delete the channels Transmission [m][b][ ][Set ID][ ][Data][Cr] Key (Command1:m, Command2:c) Transmission Data: adjust input Transmission source , Command2:y) for sub picture in PIP mode. [x][y][ ][Set ID][ ][Data][Cr] code.
577Gen-2 06/8/24 8:22 AM 80 Page APPENDIX IR CODES 1. How to Connect Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes Output waveform modulated with 37.
577Gen-2 06/8/24 Code (Hexa) 8:22 AM Function Page 81 Code Note (Hexa) Function Note 0F TV Remote control Button 44 ENTER Remote control Button 0B INPUT Remote control Button 72 PIP CH-Remote control Button (Power On/Off) 71 PIP CH+ Remote control Button Power 61 PIP INPUT Remote control Button 02 VOL + Remote control Button 08 POWER Remote control Button C4 POWER ON Discrete IR Code (Only C5 POWER OFF Discrete IR Code (Only Power OFF) 60 PIP Remote control B
577Gen-2 06/8/24 8:22 AM 82 Page APPENDIX PROGRAMMING THE REMOTE CONTROL The provided universal remote control be can programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a 1 code into a remote mode To find out whether your remote control (such VCR) as a and press the can corresponding operate each device without programming, mode button on turn on the device the remote.
577Gen-2 06/8/24 8:22 AM Page 83 VCRs Brand Codes AIWA 034 AKAI 016 043 125 146 046 Brand Codes MAGNAVOX 031 033 067 068 012 031 124 MARANTZ 034 033 041 Brand Codes SAMSUNG 032 040 102 104 105 107 109 112 113 115 120 122 067 125 069 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 0 43 MARTA 101 MATSUI 027 030 BROKSONIC 035 037 129 MEI 031 033 CANON 028 031 033 MEMOREX 003 010 014 031 CAPEHART 108 033 034 053 072 CRAIG
577Gen-2 06/8/24 8:22 AM 84 Page APPENDIX TROUBLESHOOTING CHECKLIST The does operation not work normally.
577Gen-2 06/8/24 8:22 AM Page 85 The audio function does not work. Press the VOL Picture OK No VOLUME button. or Sound muted? Press MUTE button. & Try sound another channel. The problem Are the audio cables installed output from one the speakers No of Adjust A Unusual sound from inside the There is The product problem a is signal out change when the in of PC mode. in ambient product option.
577Gen-2 06/8/24 8:22 AM 86 Page APPENDIX MAINTENANCE Early malfunctions have your new Cleaning the 1 Here's a 2 it to Make a the Cleaning the To remove Please be dirt sure prevented. Careful and regular cleaning can extend the amount of time you will unplug the power cord before you begin any cleaning. to turn the power off and way to keep the dust off your little fabric softener wipe sure be sure Screen great water and use can TV.
577Gen-2 06/8/24 8:22 AM Page 87 PRODUCT SPECIFICATIONS MODELS including 26.8 stand (Width x Height x 681.0 Dimensions 26.8 stand x 681.0 Weight including excluding stand 40.8 stand 33.5 (26LC2R-UJ) (32LC2R-UJ) 21.3 x 6.8 inches x 542.0 19.3 x x x 172.0 31.9 pounds / pounds / x 119.0 18.5 15.2 31.9 9.3 inches x 235.0 mm 48.2 kg kg 40.8 -50/60Hz, 1.3A 22.3 x x 4.9 inches 566.8 x pounds / pounds / AC100-240V 123.5 21.9 18.5 mm kg kg -50/60Hz, 1.
577Gen-2 06/8/24 8:22 AM 88 Page PRODUCT SPECIFICATIONS 42PC3RV MODELS (42PC3RV-UJ) including 44.4 stand Dimensions (Width x Height 748.5 x stand 44.4 x 27.4 3.8 inches 1129.0 Weight Power x 695.0 98.5 x mm 62.6 pounds / 28.4 kg excluding stand 54.0 pounds / 24.5 kg AC100-240V -50/60Hz, 2.