OWNER’S MANUAL IPS LED Monitor (LED Monitor*) * L G LED Monitor applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 34UC89G www.lg.
ENGLISH TABLE OF CONTENTS LICENSE........................................3 ASSEMBLING AND PREPARING.4 -- Product Composition...................................................4 -- Supported Drivers and Software..........................5 -- Product and Button Description...........................6 How to Use the Joystick Button Input Connector -- Moving and Lifting the Monitor............................8 -- Installing the Monitor .............................................
Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
ENGLISH ASSEMBLING AND PREPARING Product Composition Please check whether all the components are included in the box before using the product. If there are any missing components, contact the retailer where you purchased the product. Note that the product and related components may look different from those shown here. CD (Owner’s Manual / Software / Guides) / Cards Power cord AC/DC Adapter USB 3.
•• Always use genuine LG components to ensure safety and product performance. •• The product warranty will not cover damage or injury caused by the use of unauthorized components. •• It is recommend that use the supplied components. •• If you use generic cables not certified by LG, the screen may not display or there may be image noises. NOTE •• The components may look different from those illustrated here.
Product and Button Description How to Use the Joystick Button ENGLISH You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger. Basic Functions Joystick Button / Power LED / •• On: Power on •• Off: Power off Power on Press the joystick button once with your finger to turn on the monitor. Power off Press and hold the joystick button once with your finger to turn off the monitor.
Input Connector ENGLISH 1 VHUYLFH#RQO\ 2
Moving and Lifting the Monitor ENGLISH When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation, regardless of its shape or size. •• Place the monitor in the original box or packing material before attempting to move it. •• Before moving or lifting the monitor, disconnect the power cord and all other cables. •• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
ENGLISH •• If you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.
Installing the Monitor 1 ENGLISH Assembling the Stand CAUTION •• To protect the screen, place the screen face down on the screen pad which is inside the box.
3 4 ENGLISH Cable Holder * Assemble the Cable Holder.
NOTE ENGLISH •• Press the stand until the button reaches the top. Installing on a Table 1 Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm away from the wall to ensure sufficient ventilation. 100 mm 100 mm 100 mm CAUTION •• Illustrations in this document represent typical procedures, so they may look different from the actual product. •• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product.
2 Connect the power adapter to the monitor and then plug the power cord into CAUTION •• Unplug the power cord before moving or installing the monitor. There is risk of electric shock. Cautions When Connecting Power Cord 3 Press the joystick button on the bottom of the monitor to turn on the monitor. 100-240 V ~ •• Make sure to use the power cord that is provided in the product package and connect it to a grounded power outlet.
ENGLISH Adjusting the Stand Height Adjusting the Angle 1 Place the monitor mounted on the stand base in an upright position. 2 Handle the monitor with both hands for safety. 1 Place the monitor mounted on the stand base in an upright position. 2 Adjust the angle of the screen. The angle of the screen can be adjusted forward or backward from -5° to 20° for a comfortable viewing experience. 20 Max. 120.
NOTE •• To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as illustrated below. •• The left or right side of the monitor head can be slightly rotated up or down (up to 3°). Adjust the horizontal level of the monitor head. 20 Monitor head -5 20 •• Be careful not to touch or press the screen area when adjusting the angle of the monitor.
ENGLISH Tidying up Cables Using the Kensington Lock Arrange the cables using the cable holder as shown in the illustration. The connector for the Kensington security system is located at the bottom of the monitor. For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website at http://www.kensington.com. Connect the monitor to a table using the Kensington security system cable. Mouse Holder NOTE •• The Kensington security system is optional.
Installing the Wall Mount Plate 1 Place the monitor’s screen face down. To protect the screen from scratches, This monitor meets the specifications for the wall mount plate or other compatible devices. cover the surface with a soft cloth. 2 Remove the stand from the monitor by pressing the button on the bottom center of the back of the monitor. 1 Place the screen face down.
Installing on the Wall ENGLISH Install the monitor at least 100 mm away from the wall and leave about 100 mm of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket. To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
NOTE Wall Mount Plate Back of the Monitor CAUTION •• Unplug the power cord before moving or installing the monitor to avoid electric shock. •• Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. •• Applying excessive force when tightening screws may cause damage to the monitor.
ENGLISH USING THE MONITOR •• The following instructions are based on the 34UC89G model. Illustrations in this manual may differ from the actual product. Press the joystick button, go to Menu → Input, and then select the input option. CAUTION •• Do not press the screen for a prolonged time. This may cause image distortion. •• Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a screensaver if possible.
•• In HDMI input, only the RGB 4:4:4 Color Format is supported. YCbCr is not supported. •• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues. •• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
ENGLISH Connecting AV Devices Connecting Peripherals HDMI Connection USB Cable connection HDMI transmits digital video and audio signals from your AV device to the monitor. Connect your AV device to the monitor using the HDMI cable as shown in the illustration below. The USB port on the product functions as a USB hub. To use USB 3.0, connect the A-B type USB 3.0 cable of the product to the PC. Peripheral devices connected to the USB IN port can be controlled from the PC.
Connecting Headphones NOTE Connect peripherals to the monitor via the headphones port. Connect as illustrated. (sold separately) NOTE (sold separately) CAUTION •• Peripheral devices are sold separately. •• If you use angled earphones, it may cause a problem with connecting another external device to the monitor. Therefore, it is recommended to use straight earphones.
Service only port ENGLISH This port is used only for "Service" VHUYLFH#RQO\
Activating the Main Menu Button Menu Status Main menu disabled Enables the main menu. Main menu enabled Exits the main menu. (Holding down the button to turn off the monitor. You can turn off the monitor this way at any time, including when the OSD is on.) 1 Press the joystick button on the bottom of the monitor. 2 Move the joystick up/down ( / ) and left/right ( / ) to set the options. 3 Press the joystick button once more to exit the main menu.
Main Menu Features ENGLISH Main Menu Power Off Input Close Game Mode Menu Description Input Sets input mode. Power Off Turns off the monitor. Menu Configures the screen settings. Game Mode Sets the game mode for gaming. Close Closes the main menu.
User Settings ENGLISH Menu Settings 1 2 3 4 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Configure the options by moving the joystick up/down/left/right. To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it. If you want to exit the OSD menu, move the joystick to until you exit.
Menu Description ENGLISH Game Mode Changes the game mode to the one optimized for a given feature. Game Adjust Adjusts the Overclock, Black Stabilizer, Response Time, Cross Hair and Game Reset. Picture Adjust Adjusts the Brightness/Contrast, Gamma, Color Temp, R/G/B and Picture Reset. Input General Input List Selects the input mode. Aspect Ratio Adjusts the aspect ratio of the screen. Sets Language, Power LED, Automatic Standby, Quick Charge, OSD Lock, Deep Sleep, Information and Reset.
Game Mode then enter the Menu. Hz 2 Go to Game Mode by moving the joystick. 3 To return to the upper menu or set other menu items, move the joystick to pressing ( ) it. 4 If you want to exit the OSD menu, move the joystick to G-SYNC or until you exit.
Game Adjust ENGLISH 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Hz 2 Go to Game Adjust by moving the joystick. 3 To return to the upper menu or set other menu items, move the joystick to pressing ( ) it. 4 If you want to exit the OSD menu, move the joystick to until you exit.
Menu > Game Adjust Game Adjust On Sets Overclock to a higher refresh rate than specified by the panel specification. Off Disables the Overclock improvement feature. NOTE •• After the monitor reboots, change the maximum refresh rate setting in the NVIDIA control panel. •• If the screen display appears abnormal, turn off the Overclock setting. •• The function can only be used through DisplayPort.
ENGLISH Sets a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use Normal. For a fast-moving picture, it is recommended that you use Fast. Setting to Fast may cause image sticking. Response Time Game Adjust Fast Sets the response time to fast. Normal Sets the response time to normal. Slow Sets the response time to slow. Off Does not use the response time improvement feature.
Picture Adjust then enter the Menu. Hz 2 Go to Picture Adjust by moving the joystick. 3 To return to the upper menu or set other menu items, move the joystick to pressing ( ) it. 4 If you want to exit the OSD menu, move the joystick to G-SYNC or until you exit.
Input ENGLISH 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Hz 2 Go to Input by moving the joystick. 3 To return to the upper menu or set other menu items, move the joystick to pressing ( ) it. 4 If you want to exit the OSD menu, move the joystick to G-SYNC or Black Stabilizer Response Time Input List Game Mode until you exit.
General then enter the Menu. Hz 2 Go to General by moving the joystick. 3 To return to the upper menu or set other menu items, move the joystick to pressing ( ) it. 4 If you want to exit the OSD menu, move the joystick to until you exit.
ENGLISH Menu > General Description Language Sets the menu screen to the desired language. Turns the power LED on the bottom of the monitor on or off. Power LED On The power LED turns on automatically. Off The power LED turns off. Automatic Standby Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function.
Nothing is displayed on the screen. Is the monitor's power cord plugged in? •• Check if the power cord is correctly plugged into the power outlet. Is the power LED on? •• Check the power cable connection and press the power button. Is the power on and the power LED displaying white? •• Check that the connected input is enabled (Menu > Input). Is the power LED blinking? •• If the monitor is in sleep mode, move the mouse, or press any key on the keyboard, to switch the display on.
The screen retains an image. ENGLISH Does image sticking occur even when the monitor is turned off? •• Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image. •• To extend the lifetime of the monitor, use a screensaver. Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.
The display color is abnormal. •• Set the color to 24 bit (true color) or higher. In Windows, go to Control Panel > Display > Settings > Color Quality. (The settings may differ depending on the operating system (OS) you use.) Does the display color appear unstable or monochrome? •• Check if the signal cable is connected properly. Reconnect the cable or reinsert the PC's graphics card.
ENGLISH PRODUCT SPECIFICATION LCD Screen Resolution Operating Frequency Type TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen Color Depth HDMI 8-bit color is supported. DP (DisplayPort) 8-bit color is supported. Pixel Pitch 0.312 mm x 0.
ADS-110CL-19-3 190110G, manufactured by Honor Output: 19 V 5.79 A Environmental Conditions Operating Conditions Storing Conditions Dimensions Weight (Without Packaging) Temperature 0 °C to 40 °C Humidity Less than 80 % Temperature -20 °C to 60 °C Humidity Less than 85 % Monitor Size (Width x Height x Depth) With Stand 819.9 x 565.3 x 279.7 (mm) Without Stand 819.9 x 364.5 x 87 (mm) With Stand 8.3 kg Without Stand 6.1 kg Specifications are subject to change without notice.
Factory Support Mode ENGLISH (Preset Mode, HDMI/ DisplayPort PC) Preset Mode Horizontal Frequency (kHz) 640 x 480 31.469 800 x 600 37.879 1024 x 768 48.363 2560 x 1080 66.64 2560 x 1080 95.50 2560 x 1080 113.24 2560 x 1080 Vertical Frequency (Hz) Polarity (H/V) Remarks 59.94 -/- HDMI/ DisplayPort 60.317 +/+ HDMI/ DisplayPort 60.0 -/- HDMI/ DisplayPort 59.98 +/- HDMI/ DisplayPort 84.96 +/- DisplayPort 99.94 +/- DisplayPort 137.22 119.
Power LED LED Color White (For a few seconds) Sleep Mode Off Off Mode Off ENGLISH Mode On Mode
This device can be used in all regions. Read the owner's manual (CD) carefully and keep it at hand. Please note that the label attached to the product provides information for technical support. Model Serial No.
