Quick Reference Guide LED TV * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 32LN541C 39LN541C 42LN541C 47LN541C 55LN541C 32LN549E 39LN549E 42LN549E 47LN549E 55LN549E 32LP560M 42LP560M P/NO : MFL67694912 (1303-REV00) www.lgsolutions.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. yyDo not use this apparatus near water. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS yyProtect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. yyOnly use attachments/accessories specified by the manufacturer. yyUse only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
IMPORTANT SAFETY INSTRUCTIONS yyGrounding (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
IMPORTANT SAFETY INSTRUCTIONS Preventing “Image burn” or “Burn-in” on your TV screen For USA and Canada FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
LICENSES / OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, visit ‘www.lg.com’. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
TABLE OF CONTENTS 7 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS 6 LICENSES 6 OPEN SOURCE SOFTWARE NOTICE 7 TABLE OF CONTENTS 8 Installation Procedure 8 ASSEMBLING AND PREPARING 8 10 11 12 13 13 14 16 17 17 Unpacking Optional Extras (For LN549E series) Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand - Mounting on a table - Mounting on a wall - External speaker out - Tidying cables 18 REMOTE CONTROL 22 SPECIFICATIONS 24 TROUBLESHOOTING 25 CAUTION f
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING Installation Procedure 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
ASSEMBLING AND PREPARING (For LN541C series) 9 (For LN549E, LP560M series) ENERGY AV MODE INPUT TV SAVING 1 2 4 5 7 8 9 0 FLASHBK LIST 3 6 MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Remote Control, Batteries (AAA) (See p. 20) Quick Reference Guide Power Cord Stand Body, Stand Base (See p. 13) Stand Screws 7 EA, M4 x 14 (See p. 13) Cable Holder (See p.
ASSEMBLING AND PREPARING Optional Extras (For LN549E series) Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies.
ASSEMBLING AND PREPARING 11 Parts and buttons For LN549E series IN 3 USB IN Wireless Dongle Screen Side Connection Panel Power Indicator Remote Control Sensor Buttons / DVI IN 1 2 OPTICAL EXTERNAL SPEAKER OUT AUDIO OUT RJP AV IN R RS-232C IN (CONTROL & SERVICE) / ( / ( (OK / ANTENNA/ CABLE IN AUDIO IN (RGB DVI) Button / VIDEO L/MONO -AUDIO- R L RGB IN (PC) Rear Connection Panel Description ) Scrolls through the saved channels. ) Adjusts the volume level.
ASSEMBLING AND PREPARING Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yyUse at least two people to move a large TV. yyWhen transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yyAvoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING 13 Setting up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. CAUTION yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yyMake sure that the screws are fastened tightly.
ASSEMBLING AND PREPARING Mounting on a table 1 Adjusting the angle of the TV to suit view Lift and tilt the TV into its upright position on a table. (For 32LN541C, 32LN549E, 32LP560M) - Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation. Swivel 15 degrees to the left or right and adjust the angle of the TV to suit your view. 10 cm (4 inch) 10 cm 15˚ 15˚ m 10 c 10 cm 2 Connect the power cord to a wall outlet.
ASSEMBLING AND PREPARING Using the Kensington security system (optional) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. 15 Securing the TV to a wall (optional) (Depending on model) Connect the Kensington security system cable between the TV and a table.
ASSEMBLING AND PREPARING Mounting on a wall CAUTION An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount.
ASSEMBLING AND PREPARING 17 External speaker out Tidying cables Connect the external speaker. 1 Install the power cord holder and power cord. It will help prevent the power cable from being removed by accident. 2 Gather and bind the cables with the cable holder.
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries and ends to the label inside the (1.5 V AAA) matching the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. or CAUTION yyDo not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL FLASHBK AUDIO 19 PICTURE Changes the image mode. INFO Shows information on the current program. SOUND Changes the sound mode. SETTINGS Accesses the main menu. Q.MENU Accesses the quick menu. OK Selects menus or options and confirms your input. BACK Returns to the previous screen. EXIT Clears all on-screen displays and returns to TV viewing. Accesses the AV devices connected to the TV. Opens the SIMPLINK menu. SLEEP Sets the length of time until the TV to turns off.
REMOTE CONTROL For LN549E, LP560M series (POWER) Turns the TV on or off. Q. MENU Accesses the quick menu. Q.MENU TV INPUT TV 1 4 7 DVD .,;@ ghi pqrs 2 5 8 DVD Selects the remote’s operating mode: DVD. MARK abc jkl tuv 0 3 6 9 INPUT Changes the input source. def MARK Not functional mno wxyz FLASHBK Number button Enters numbers. CHAR/NUM CC VOL TIMER DELETE CH — (DASH) Inserts a dash between numbers such as 2-1 and 2-2. ENGLISH GUIDE VOL Adjusts the volume level.
REMOTE CONTROL Q.MENU PORTAL Displays the EzSign content on a TV screen. (LN549E series) Displays and removes the interactive menu. (LP560M series) MARK INFO Shows or hides the information on TV remote control buttons in EzSign mode. (LN549E series) Shows information on the current program. (LP560M series) INPUT TV 1 4 7 DVD .,;@ ghi pqrs 2 5 8 abc jkl tuv 0 3 6 9 GUIDE Shows or hides Contents List in EzSign mode. (LN549E series) Displays and removes the electronic program guide.
SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions.
SPECIFICATIONS 47LN541C (47LN541C-UA) MODELS 47LN549E (47LN549E-UA) 1,080 x 694 x 264 (mm) With stand 42.5 x 27.3 x 10.4 (inch) Dimensions (W x H x D) 1,080 x 642 x 80.5 (mm) Without stand Weight 42.5 x 25.3 x 3.2 (inch) With stand 14.7 kg (32.4 lbs) Without stand 13.4 kg (29.5 lbs) Current Value / Power consumption 1.3 A / 130 W 55LN541C (55LN541C-UA) MODELS 55LN549E (55LN549E-UA) 1,250 x 790 x 297 (mm) With stand 49.2 x 31.1 x 11.7 (inch) Dimensions (W x H x D) 1,250 x 737 x 79.
TROUBLESHOOTING TROUBLESHOOTING General Problem Solution Cannot control the TV with the remote control. yyCheck the remote control sensor on the product and try again. yyCheck if there is any obstacle between the product and the remote control. to yyCheck if the batteries are still working and properly installed ( to , No image display and no sound is produced. yyCheck if the product is turned on. yyCheck if the power cord is connected to a wall outlet.
CAUTION for using EzSign 2.0 25 CAUTION for using EzSign 2.0 For LN549E series yyDo not remove a USB drive while data is being copied. It can corrupt the data and EzSign may not work properly. yyWhile loading a USB device or dongle, your TV may function slower than normal. yySome user-created subtitles may not work properly. yySome special characters are not supported in subtitles. yyHTML tags are not supported in subtitles. yySubtitles in languages other than the supported languages are not available.
IR CODES IR CODES (Depending on model) Code (Hexa) Function 08 (POWER) Note Remote control Button (Power On/Off) ENGLISH 30 AV MODE Remote control Button 0B INPUT Remote control Button 0F TV Remote control Button 10-19 Number Key 0-9 Remote control Button 4C - (DASH) / LIST Remote control Button 1A FLASHBK Remote control Button 02 VOL + Remote control Button 03 VOL - Remote control Button 1E FAV Remote control Button 09 MUTE / DELETE Remote control Button 00 CH ^ /
EXTERNAL CONTROL DEVICE SETUP 27 EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/ V control system) to control the product’s functions externally. Type of connector; D-Sub 9-Pin Male 1 5 Connect the serial port of the control device to the RS232C jack on the product back panel. 6 9 RS-232C IN (CONTROL & SERVICE) RS-232C IN (CONTROL & SERVICE) No.
EXTERNAL CONTROL DEVICE SETUP RS-232C configurations Set ID Set ID number.
EXTERNAL CONTROL DEVICE SETUP 29 Communication Parameters yyBaud rate: 9600 bps (UART) yyData length: 8 bits yyParity : None yyStop bit: 1 bit yyCommunication code: ASCII code yyUse a null modem cable. Command reference list 01. Power COMMAND1 COMMAND2 DATA (Hexadecimal) k a 00 - 01 COMMAND1 COMMAND2 DATA (Hexadecimal) 14. Treble k r 00 - 64 b (See p. 31) 15. Bass k s 00 - 64 k c (See p. 31) 16. Balance k t 00 - 64 04. Screen Mute k d 00 - 01 17.
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set.(j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired set ID number in Option menu. Adjustment range is 1~ 99. When selecting Set ID 0, every connected the set is controlled.
EXTERNAL CONTROL DEVICE SETUP 01. Power (Command: k a) To control Power On/Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * Note: In this model, set will send the Acknowledge after power on processing completion.
EXTERNAL CONTROL DEVICE SETUP 12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 13. Remote Control Lock Mode (Command: k m) To lock the remote control and the front panel controls on the set.
EXTERNAL CONTROL DEVICE SETUP 20. Auto Configuration (Command: j u) To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode. Transmission [ j ][u][ ][Set ID][ ][Data][Cr] Data 01: To set Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 21. Channel Tuning (Command: m a) To tune channel to following physical/major/minor number.
EXTERNAL CONTROL DEVICE SETUP * Table List (Channel Tuning) 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 Reserved 3 2 1 0 Step 0 Main 0 Two 0 Use x 0 0 0 0 NTSC Air 1 Sub 1 One 1 No Use x 0 0 0 1 NTSC Cable x 0 0 1 0 ATSC Air x 0 0 1 1 ATSC Cable_std x 0 1 0 0 ATSC Cable_hrc x 0 1 0 1 ATSC Cable_irc x 0 1 1 0 ATSC cable_auto x 0 1 1 1 Reserved x x x x x ...
CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE • The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
The model and serial numbers of the TV are located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL Pro:Centric is a trademark of LG Electronics U.S.A., Inc. All other trademarks or registered trademarks are the property of their respective owners. LG Customer Information Center For inquires or comments, visit www.lg.