Owner's Manual

Owner's Manual 13
Operating
Instructions
ENGLISH
Operation indicating
lamps
Operating
Instructions
How to insert the Batteries
Storage
and
Tips
for
using
the Remote Controller
1. Remove the
battery
cover
by pulling
it
according
to the arrow
direction.
2. Insert new batteries
making
sure that the
(+)
and
(-)
of
battery
are
installed
correctly.
3. Reattach the cover
by sliding
it back into
position.
Use 2
AAA(1.5volt)
batteries.
Do not use
rechargeable
batteries.
NOTICE
?
The remote controller
may
be stored
by mounting
it on a wall.
?
To
operate
the room air
conditioner,
aim the
remote controller at the
signal receptor.
Signal receptor
Receives the
signals
from the remote
controller.(Signal receiving
sound: two short
beeps
or one
long beep.)
Operation indicating lamps
On/Off :
Lights up during
the
system operation.
Sleep
Mode :
Lights up during Sleep
Mode Auto
operation.
Timer :
Lights up during
Timer
operation.
Defrost Mode :
Lights up during
Defrost Mode or *Hot
Start
operation (Heat pump
model
only)
:
Lights up during
outdoor unit
operation.
(Cooling
model
only)
NEO Plasma : The function illustrates its
dynamic
mode
by using
a
multiple lighting system.
Outdoor Unit
Operation
*Hot Start
operation: Stops
the indoor fan in
Heating Operation
to
prevent
cold air from
blowing
out from unit.