Owner's Manual

HOW TO USE
11
ENGLISH
Air Cleaning Operation
It cleans the indoor with clean and fresh air.
1. Press the button in order to start operation of the air purifier.
• With the buzzer sound, it starts the operation with the operation mode indicator LED and the
Lighting lamp turned on.
2. Press the Speed button to select the desired wind volume.
• Each time you press the Speed button, a serial setting can be made in the order of Automatic
→ Low → Medium → High → Automatic.
• When first turned on, it runs AUTO mode.
(AUTO mode controls air volume depending on the air quality.)
• During a sensor stabilization period (30 seconds) after operation starts, the dust status indicator
prepares display of a cleanliness level.
30 seconds later, an indoor cleanliness level and dust density are displayed. Since the odor sen-
sor is stabilized after 2 minutes after operation start, contamination level of
PM10/PM2.5/PM1.0 is displayed for cleanliness.
Color for the air cleanliness
(contaminated) red → orange → yellow → green (clean)
HOW TO USE
…
1,MFL68181328,영영 2016. 10. 7. 영영 4:36 Page 11