Owner's Manual

12
HOW TO USE
ENGLISH
Indicator display
1. Press the Indicator button and check the density of PM10/PM2.5/PM1.0.
• Pressing the button each time checks the density of PM10 → PM2.5 → PM1.0 in turn. Press-
ing the Indicator button during operation displays the density of PM10/PM2.5/PM1.0 at the
display for 10 seconds.
• Check the dust particle size display window.
• Dust density is displayed based on the dust density window with the highest contamination
level.
Example) When PM10 density is 79(normal), and PM2.5 is 95(bad), and PM1.0 is 50(normal),
PM2.5 value is displayed for dust density.
Cleanliness is displayed in 4-level color depending on the contamination level of
PM10/PM2.5/PM1.0 and odor.
(contaminated) red → orange → yellow → green (clean)
• The Lighting lamp color is displayed based on the worst level among PM10/PM2.5/PM1.0 and
odor.
The Jet Clean function
It operates strongly during the predetermined time and purifies the indoor air.
1. Press the button.
2. Press the Jet Clean button.
• It operates strongly for 30 minutes when the Jet clean function is selected.
• If you select the Jet Clean function while sleeping mode, the dust density display turns off
after 3 seconds, and the Jet Clean operates for 30 minutes before returning to the sleeping
mode.
1,MFL68181328,영영 2016. 10. 7. 영영 4:36 Page 12