Operation Manual

37
Installation

For optimum picture quality, adjust antenna direction if needed.
Antenna/Cable
Connection
Connection to External equipment
wall antenna
socket
VHF antenna
UHF antenna
outdoor
antenna
Single Family Home
Be careful not to bend the bronze wire
when connecting the antenna.
Bronze Wire
Bronze Wire
75Ω Round Cable
Turn clockwise to tighten.
Apartment Buildings
Typical
Antennas
Direct
Connection
VCR/DVD
Connection Panel
Cable Box Connection Panel
Connection
1. Connect the audio/video out sockets of the
VCR to audio/video in sockets of the set.
2. Press the TV/AV/RADIO button to select AV.
3. Press the PLAY button on the VCR.
The VCR/DVD playback picture
appears on the screen.
Connection
1. Use the TV/AV/RADIO button on
the remote control to select TV.
2. Tune to cable service provided
channels using the cable box.
- After subscribing to a local cable TV service and installing a converter, you can
watch cable TV programming.
- For further cable TV information, contact a local cable service provider.
 In a poor signal area to improve picture quality,
purchase and install a signal amplifier.
 If the antenna is not installed properly, contact
your dealer for assistance.
Connecting
a VCR / DVD
Cable TV
Connections
• If you have a mono VCR, connect the audio cable from the VCR to the AUDIO
L/MONO socket of the set.
NOTE