Installation Manual

ENGLISH
15
INSTALLATION OF DECORATIVE PANEL(ACCESSORY)
7 Connect one display connector and two
vane control connectors of front panel to
indoor unit PCB.
The position marking on PCB is as:
Display connector : CN-DISPLAY
Vane control connector: CN-VANE 1,2
8 Close the cover for control box.
9 Fit the link on the panel as shown in
picture. (The link is included in the front
panel unit box.) (TM/TN/TP)
10 Attach the other side of link on the filter
guide of inlet grille. Install the air inlet
grille and filter on the panel. (TM/TN/TP)
11 Install the air inlet grille and Filter on the
panel.
CN-VANE 1,2
CN-DISPLAY
Link
Link
Filter
guide
Link
Link
Filter
guide
LinLink
Link
Filter
guide
Link
Link
Lin
Link
Filte
Filter
guid
guide
Link
Filter
guide
Link
Link
Filter
guide
Air conditioner
unit
Decorative panel
Fit the insulator (this part) and
be careful for cool air leakage
Good example
Ceiling
board
Ceiling
board
Decorative
panel
Air
Cool air leakage
(no good)
Bad example
Air conditioner unit
CAUTION
Install certainly the decorative panel.
Cool air leakage causes sweating. 
Water drops fall.
!