OWNER’S MANUAL Safety and Reference Wall Mount Bracket Please read this manual carefully before operating your set and retain it for future reference. WB21LGB Printed in Korea *MFL71772303* (2108-REV04) www.lg.com Copyright 2021 LG Electronics Inc. All Rights Reserved.
Accessories Precautions for Safety _index ENGLISH -- Professional installers should read this manual carefully to ensure proper installation. -- Professional installers should forward this manual to customers after installation and encourage them to read and store it in a convenient place for future reference. After reading the installation manual, keep it in a convenient place for future reference. Wall mount fixing anchors 12 pcs. Wall mount fixing screws 12 pcs. TV fixing screws 4 pcs.
Caution Make sure a wall is available prior to proceeding with installation. Make use of the anchors and screws provided with the product. Use of any unauthorized anchors or screws may not support the product's weight, which poses safety risks. When drilling in the wall for installation, be sure to use drill bits and drills of the specified diameter. Follow the instructions for the hole depth.
_index ENGLISH • Check the enclosed accessories before installation. We are not responsible for any lost or damaged accessories after the inner packaging is opened. • When an infant or small child swallows the enclosed accessories, various safety accidents such as choking may occur. Keep the enclosed accessories out of the reach of infants and children. • When tightening screws, tighten until fully snug. Avoid using excessive force when tightening the screws.
For installation on concrete wall 1. Drill holes in anchor locations with a drill bit of Ø 8 mm to a depth of 80 mm (3.1 inches) to 100 mm (3.9 inches). _index ENGLISH 2. Attach the guide paper to the wall when determining the TV’s installation site. -- Ensure the guide paper is level when attaching it to the wall. -- Attach it by referring to the outer line of the TV and the location of the TV center. B A A B 2. Clean the drilled holes. 3.
5. Tighten screws for fixing the wall mount to the holes. At this time, tighten the screws with the torque more than 45 kgf/cm (39.0 lbf/in) to 60 kgf/ cm (52.0 lbf/in). ENGLISH Screws for fixing the wall mount 4. A ssembling the wall surface support and wall mount support 1. Fasten the two wall surface supports together by using the wall surface support fixing screws. _index For installation on wood stud Use the Ø 4 mm drill bit for wood to drill holes with the depth of 76 mm (2.9 inches).
5. I nstalling the wall mount supports and the wall surface supports: By country or region ENGLISH North America (406 mm (15.9 inches)) 1. 86-Inch model _index 2.
Japan (455 mm (17.9 inches)) 1. 86-Inch model _index ENGLISH 2.
Australia (600 mm (23.6 inches)) 1. 86-Inch model _index ENGLISH 2.
6. I nstalling wall surface supports and wall mount supports _index ENGLISH 1. Install the wall mount support at the location marked on the guide paper. Insert the wall mount fixing screws into the wall mount supports by matching the holes. -- Here, turn and fasten the wall mount fixing screws until the screws, the wall mount support, and the wall surface come into full contact with each other.
_index 4. On the back, attach the protective cushions on the bottom left and right side. 5. Once the wall mount and cushions are attached to the TV, install it on the wall with wall support attached. -- Caution: Ensure two or more people work together when mounting the TV. (If the product is lifted by one person, it may fall and result in injury or damage.) Be careful not to trap the power cord between the wall mount bracket and the TV when mounting the TV.
_index ENGLISH 6. Push the TV close to the wall. -- Be sure to gently push the upper and lower parts of the TV so that the pushing doesn't affect the TV. -- Gently push the upper center of the TV once again until it's completely pressed against the wall. -- Caution: Do not apply excessive force to the screen. (Doing so can damage the screen.) 7. Adjust the product’s position by hand so it’s horizontal. -- Adjust it in the desired direction by pushing the sides of the TV. 12 8.
_index ENGLISH 3. Push the TV until it makes close contact with the wall. -- Push the left side of the TV to balance it, and then gently push the top and bottom parts of the TV so that it does not affect the product. -- Gently push the upper center of the TV once again until it's completely pressed against the wall. -- Caution: Do not apply excessive force to the screen. (Doing so can damage the screen.) 4.
Specifications [Unit: mm (inches)] 170 (6.6) 191.5 (7.5) 125 (4.9) _index ENGLISH 135.4 (5.3) 99.5 (3.9) 17.2 (0.6) 11.2 (0.4) 100 (3.9) 14 316 (12.4) 100 (3.9) 82 (3.2) 25 (0.9) 13˚ 50 (1.9) 60 (2.3) 100 (3.9) 65 (2.5) 50 (1.
135.4 (5.3) Height (mm (inches)) 191.5 (7.5) Depth (mm (inches)) 17.2 (0.6) Product Weight (kg (lbs)) 1.2 (2.6) x 2 Screws Distance (mm (inches)) 75 Inch 1281 x 125 (50.4 x 4.9) 86 Inch 1586 x 125 (62.4 x 4.9) Max. Tensile Load (kg (lbs)) 70 (154.3) Wall Mount Support (mm (inches)) 100 x 100 (3.9 x 3.