Manual

When washing cycle is completed,
"End "is displayedonthe "Multi
display'.
When child lock is selected, the
,,r _ ,,is displayed.
t.t.
When time delay is selected, itshows
the remaining times to finish the selected
program.
If the washer encounters a fault during
operation, the associated fault will be
displayed.
"PE": Water pressure sensing error
"FE" :Problem ofoverfillingwater
"dE" : Door is not closed
"LE ": Over load in motor.
"rE ": Over load in motor.
",'E":Water inlettrouble
"OE": Drainage trouble
"UE" : Unbalanced load
"/_E ": water temperature trouble
"dHE ": Dry heater or thermostat
trouble
If these error lettersare displayed,please
refer to the troubleshootingpage26 and
follow the guide.
During washing cycle, the remaining
washing time is displayed.
Recommended program by
manufacturer.
[WASH]
-SANITARY: Approx.1 hourand37minutes
-COTTON: Approx.1hourand22minutes
-PERM.PRESS:Approx.1hourand
17minutes
-WOOL/SILK:Approx.56minutes
-RINSE+SPIN:Approx.32minutes
[WASH/DRY]
-SANITARY:Approx.4 hoursand46minutes
-COTTON: Approx.4hoursand31minutes
-PERM.PRESS:Approx.4 hoursand
25minutes
-RINSE+SPIN:Approx.3 hoursand
41minutes
The washing time may vary by the
amount of laundry,water pressure,
water temperature and other washing
conditions.
If an unbalanced load is detected or if
the suds removing program operates,
the wash time may be extended.
(Max. increasing time is 45minutes.)