Spec Sheet

Heavy-Duty integrally molded rubber
gasket provides a superior seal.
Meets 10’ stack test requirements.
QuickTree
®
technology allows easy
removal of float without disconnecting
plumbing or pulling the pump
Specifications are subject to change without notice.
Copyright © Liberty Pumps, Inc. 2017
All rights reserved. LLIT4500-R08/17
Liberty Pumps • 7000 Apple Tree Avenue • Bergen, New York 14416 • Phone [phone] Fax [phone]
www.libertypumps.com
Specifically designed for higher head applications
such as commercial and industrial buildings.
DIMENSIONAL DATA:
Weight: 16 LBS.
Major Height:
14-1/8"
Major Width:
13-3/4"
Inlet Height (from bottom of basin):
12-5/8"
Total Capacity:
5.5 Gallons
Inlet Size:
2"
Discharge Size:
2"
Vent Size: 2"
PERFORMANCE CURVE 60 hz
0102030405060
5
10
15
20
25
30
35
40
0
Flow (GPM)
Head (Feet)
180˚ F
77˚ F
Flow (LPM)
03876 114 151 189 227
1.5
3
4.5
6
7.6
9.1
10.6
12.1
0
Head (Meters)
FEATURES:
• Factory pre-assembled.
• Fully automatic operation.
• QuickTree
®
technology allows quick
inspection and removal of float switch
without disconnecting the plumbing.
• Oil-filled motor with thermal-overload
protection.
• Corrosion-resistant polyolefin basin with
integrally molded rubber gasket for a
superior gas-tight seal.
• Maintenance-free, permanently lubricated
sealed bearings.
• 10' power cord with ground plug
• 3/8" Solids-Handling
• 1/2 hp
Maximum fluid temperature 180 degrees F.
Not intended for use with chemicals.
APPLICATIONS:
• Laundry Trays
• Commercial Sinks
• Bar Sinks
• Dishwashers
• Dehumidifiers
• Wherever gray
wastewater drainage is
needed below
gravity lines.
Discharge,
MODEL HP Volts Amps Inlet & Vent Alarm
405 1/2 115 7.3 2" No
405/A 1/2 115 7.3 2" Standard Alarm
405/A-EYE 1/2 115 7.3 2" NightEye
®
Wireless
405HV 1/2 230 3.5 2" No
Alarmed models come with factory mounted alarm float in system. No assembly required.
See Alarm literature for ALM-2 standard alarm or NightEye
®
Wi-Fi alarm for complete alarm specifications.
COMMERCIAL DRAIN PUMP
MODEL 405 & 405HV
PUMPS