Spec Sheet

Vertical float

switch models

available in 115V

• Heavy cast iron construction

• Oil-filled, thermally protected motor

• Permanently lubricated ball bearings

• 2 Vane corrosion resistant *HYTREL

impeller

• All stainless-steel fasteners and rotor shaft

• Quick-connect 10' standard power cord

allows replacement of cord in seconds

without breaking seals to motor.

(25' length optional. 35' and 50' bare lead

cords available.)

*HYTREL

is a registered trademark of DuPont Polymers

Features

1/2 hp

2" Solids Handling

118 GPM at 10' TDH

25' Maximum Head

LE50-SERIES

Sewage Pumps

PAGE 1
LE50-SERIES Sewage Pumps 1/2 hp 2" Solids Handling 118 GPM at 10' TDH 25' Maximum Head Features • Heavy cast iron construction • Oil-filled, thermally protected motor • Permanently lubricated ball bearings • 2 Vane corrosion resistant *HYTREL® impeller • All stainless-steel fasteners and rotor shaft • Quick-connect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor. (25' length optional. 35' and 50' bare lead cords available.
PAGE 2
LE50-Series Impeller Shaft 2 Vane semi-open capable of passing a 2" spherical solid Stainless Hardware Paint Stainless Powder coat Mechanical Shaft Seal Max Fluid Temperature Unitized ceramic carbon 104°F (40°C) Continuous duty 140°F (60°C) Intermittent Bearings Motor Upper and lower ball bearings Submersible type, oil-filled, hermetically sealed, thermally protected Float Switch (automatic models) Wide-angle and vertical float switch available Power Cord Type SJTW, Quick-connect 10' standa