Specification

ManualsBrandsLiberty Pumps ManualsPlumbingPRG-Series ProVore 1 HP Automatic Grinder Pump

Pump Specifications

PRG - SERIES 1HP Submersible Grinder Pump

0 20 40 60 80 100 120 140 160 180

0 10 20 30 40 50

TOTAL HEAD IN METERS

LITERS PER MINUTE

TOTAL HEAD IN FEET

GALLONS PER MINUTE

Summary of content (7 pages)

PAGE 1
Pump Specifications PRG - SERIES 0 20 40 1HP Submersible Grinder Pump LITERS PER MINUTE 60 80 100 120 140 160 180 60 18 16 50 14 12 10 30 8 20 6 4 TOTAL HEAD IN METERS TOTAL HEAD IN FEET 40 10 2 0 0 0 10 20 30 40 50 GALLONS PER MINUTE PRG100_ R6/6/2017 ©Copyright 2017 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
PAGE 5
ProVore® PRG100 - Series Electrical data MODEL HP VOLTAGE PHASE SF FULL LOAD AMPS LOCKED ROTOR AMPS THERMAL OVERLOAD TEMP STATOR WINDING CLASS CORD LENGTH FT DISCHARGE AUTOMATIC PRG101A 1 115 1 1.0 12 47.5 105˚C 221°F B 10 2” NPT WIDE ANGLE PRG101A-2 1 115 1 1.0 12 47.5 105˚C 221°F B 25 2” NPT WIDE ANGLE NO PRG101M 1 115 1 1.0 12 47.5 105˚C 221°F B 10 2” NPT PRG101M-2 1 115 1 1.0 12 47.5 105˚C 221°F B 25 2” NPT NO PRG101AV 1 115 1 1.0 12 47.
PAGE 6
ProVore® PRG100 - Series Specifications 1.01 OPERATING CONDITIONS: Each submersible pump shall be rated at 1 hp_____ volts _______ phase 60 Hz. 3450 RPM. The unit shall produce ______G.P.M. at ______ feet of total dynamic head. The submersible pump shall be capable of handling residential sewage and grinding it to a fine slurry, enabling it to be pumped over long distances in pipelines as small as 1.25" in diameter.
PAGE 7
6.01 IMPELLER The impeller shall be class 25 gray cast iron with pump out vanes on the back shroud to keep debris away from the seal area. It shall be keyed and bolted to the motor shaft. 7.01 CUTTER MECHANISM The cutter and plate shall be of the V-Slice® design and consist of 440 stainless steel with a Rockwell C hardness of 55-60. The stationary cutter plate shall have specially designed orifices through it, which enable the slurry to flow through the pump housing at an equalized pressure and velocity.