Network Card User Manual

The options "a" "d" and "e" allow you to manage your list of network

devices with access to the card. These options can be used as a com-

plex instruction to add a single device, specify read/write access rights,

and designate the Community String. For, example, entering:

"a 126.4.1.200 read NewCommunity"

adds device 126.4.1.200 to the community list. The menu will update:

Display/Modify Communities Menu

--------------------------------

1: 126.4.1.100 write MyCommunity

2: 126.4.1.200 read NewCommunity

<ESC>: Cancel menu level

<a>dd <d>elete <e>dit

As you are adding communities, you need to consider access rights.

Notice above, that 126.4.1.100 has write access when the device passes

the correct Community String of MyCommunity. This means that this net-

work device has both read and write access to the card, whereas

126.4.1.200 has only the ability to read information when providing the

correct Community String. Devices with write access can control the UPS

and reconfigure settings of the card.

Select option "3" to edit the list of devices you want to receive traps from

the card via SNMP.

Display/Modify Trap Communities Menu

-------------------------------------

1: 126.4.1.100 MyCommunity

<ESC>: Cancel menu level

<a>dd <d>elete <e>dit

Complex lines allowed. e.g.