Network Card User Manual

5. Press "Enter" to see the Main Menu.
If you do not see the Main Menu, press "Enter" again several times. If the
Main Menu fails to appear, confirm that the blue configuration cable is
installed properly, that your PC or terminal COM port is active, and that
you are using the correct communication settings. If, after verifying the
cable and your communication settings are correct you still do not see the
Main Menu, reinstall the card in the Intellislot Bay.
NOTE: The card is powered by the UPS. If the UPS is ON, the card will
operate automatically. If you have the cable connected while inserting
the card, you will see initialization text scroll on your screen. If the card
has already been powered, you will not see this information.
Main Menu
From the Main Menu screen, you will find configuration information func-
tionally grouped.
Liebert Network Interface Card
Main Menu
----------
1: System Information
2: Network Interface
3: SNMP Communications
4: Web Server
5: Firmware Updates
6: Factory Settings
q: Quit and abort changes
x: Exit and save
Please select a key ?>
Changes you make using the Service Terminal will only take effect after
the card reboots.
Accordingly, always return to the Main Menu screen after making a
change or changes and then select either option "q" or "x". If you select
option "q" your changes will be aborted and the card will retain its previ-
ous settings. When you select option "x" the card will reboot and restart
with your changes.