Process Fluid Chiller Specification Sheet

Process Fluid Chiller Designed for CTI PETNet Cyclotron 2
1050 Dearborn Drive
P.O. Box 29186
Columbus, OH 43229
Phone: [phone]
Fax: [phone]
Via Leonardo Da Vinci 8
Zona Industriale Tognana
35028 Piove Di Sacco
Italy
Phone: [phone]
Fax: [phone]
23/F Allied Kajima Bldg.
138 Gloucester Road
Wanchai
Hong Kong
Phone: [phone]
Fax: [phone]
©2000 Liebert Corporation. All rights
reserved throughout the world.
Specifications subject to change without
notice.
®Liebert and the Liebert logo are
registered trademarks of Liebert
Corporation. All names referred to are
trademarks or regisered trademarks of
their respective owners.
Model
No.
A-Width
in. (mm)
B-Height
in. (mm)
C-Depth
in. (mm)
D
Weight
lbs. (kg)
Voltage (60 Hz)
PS096A 77 (1956) 69.25 (1759) 38.5 (978) 5.5 (140) 750 (340) 460, 3-phase; 208/230, 3-phase
PS120A 77 (1956) 69.25 (1759) 38.5 (978) 5.5 (140) 750 (340) 460, 3-phase; 208/230, 3-phase
Standard Features
• Indoor/outdoor cabinet
• Hermetic compressor
• Refrigerant dehydrator
• Expansion valve
• Refrigerant receiver
• Stainless steel fluid reservoir expansion tank
• Pressure relief valve
• Hot gas bypass valve capacity control
• Stainless steel pump
Optional Features
• Refrigerant gauges and reservoir heater
Suggested Options (may not be required)
• EWB15W—Indoor wallbox with fluid filter, flow
meter, temperature gauges, shut-off/ball valves
and 1" hose barbs.
Accessories
• Emergency water bypass
• Enviro-source emergency bypass
• Water level control and alarm system
•Fluid pressure gauge
•Check valve
• Dial thermometer
• Relief valve
• Circuit setter
• Ball valve
• High temperature thermostat
• Low flow switch
• Liebert RCM8 monitor
Required Options
• 100 gallon stainless steel storage tank built into
chiller frame
Liebert Web Site—http://www.liebert.com
SL-16543 (03/01)