Operating instructions Refrigerator Read the operating instructions before switching on for the first time Page 8 GB 7083 327-00 GKv 1012
Disposal notes Range of appliance use The appliance contains reusable materials and should be disposed of properly - not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws. The appliance is suitable solely for cooling food in a domestic environment or similar.
Safety instructions and warnings • To prevent injury or damage to the unit, the appliance should be unpacked and set up by two people. • In the event that the appliance is damaged on delivery, contact the supplier immediately before connecting to the mains. • To guarantee safe operation, ensure that the appliance is set up and connected as described in these operating instructions. • Disconnect the appliance from the mains if any fault occurs. Pull out the plug, switch off or remove the fuse.
Setting up • Do not place the appliance in direct sunlight or near cookers, radiators and similar sources of heat. Appliance dimensions • The floor on which the appliance stands should be horizontal and level. Compensate for uneven floors with the adjustable feet. • Do not cover ventilation openings or grille.
Setting the temperature Increasing the temperature Press the Up button. Reducing the temperature Press the Down button. - When pressing one of the buttons for the first time, the display will start to flash. - Pressing this button again enables you to change the temperature setting. - The electronic controls will switch over automatically about 5 seconds after the last time you pressed the button, and the actual temperature will be displayed.
Cooling Malfunctions The ventilation slots on the inside must not be covered! • Appliance does not function: – Is the appliance switched on? – Is the plug correctly fitted in the mains socket? – Is the fuse intact? The grid shelves can be moved to accommodate different height bottles or packages. Cooling with fan With the fan function switched on, a uniform temperature distribution will be attained in the refrigerator compartment. This is recommended: - in high room temperatures (approx.
GB Changing over door hinges 1. Remove screw from lower hinge bracket. 2. Lift door, tilt to the right and remove. 5. Turn lower hinge pin through 180° and remove. 6. Insert pin on the opposite side and turn through 180°. 7. Locate door on upper pin. 8. Tilt door inwards from the left. 9. Secure hinge pin with screw. 3. Transfer upper hinge components to the opposite side. 4. Transfer lower hinge bracket and cover plate to the opposite side. 10.