Assembly and installation instructions

11
10.
i nsTallaTion
9.
Use screw A or B, depending on the position of the
base of the adjacent cabinet.
Fit the magnet brackets to the screw heads.
10.
Insert the foam block into
the opening in the appli-
ance base as indicated.
1/16"
(1.4 mm)
1/16"
(1.4 mm)
9.
11.
11.
Cut the foam block to the correct height – the depth
will depend on the position of the base of the adjacent
cabinet.
12.
Fit the toe kick panel.
Important
The foam block must be touching the toe kick
panel.
12.
IMPORTANT
If the foam block is not installed, the
appliance will not deliver optimal refrigeration
performance during operation.