Assembly and installation instructions

7
p lanning i nformaTion
• Use two 4 x 19 screws.
• Screw into the designated holes.
Do not tighten the screws yet.
• Adjust the bracket until the front surface of the panel
is flush with the door front.
• Finally, tighten the screws.
Angle Bracket for Cover Panel
Depending on the height of the toe kick and the height of the counter, the supplied angle bracket
can be installed on the top or bottom of the appliance to cover unwanted openings with a panel.
The long holes in the bracket enable the bracket to slide in and out in order to align the filler
panel with the front of the door.
Dimensions of the mounted angle bracket
Mounting the premounted bracket on the
appliance top
Mounting the panel onto the angle bracket
Mount the panel onto the angle bracket using three
4 x 14 screws.