Assembly and installation instructions

8
p lanning i nformaTion
Mounting the premounted bracket on the
appliance bottom
• Use two 4 x 19 screws.
• Screw into the designated
holes. Do not tighten the
screws yet.
• Adjust the bracket until the
front surface of the panel is
flush with the door front.
• Finally, tighten the screws.
Mounting the Dust Filter
The supplied dust filter prevents dirt
from getting into the motor compartment,
which can impair the refrigeration perfor-
mance.
Therefore, always install the dust filter.
Remove the protective film from
the dust filter.
Insert the filter at the bottom and
click into place at the top.
Appliance Venting
The required air flow is directed through the toe kick
base.
It is important to use the provided
toe kick panel for the ventilation
opening.