User manual

ManualsBrandsLife N Soul ManualsPortable SpeakersBM209-BU

User Manual for the Bluetooth Speaker BM209

Thank you for purchasing this Bluetooth speaker BM209. Before getting started, please read the user's manual

carefully so as to ensure proper operation and optimized performance of this product.

I. Precautions

Please store and use this product at the ambient temperature;

Do not expose this product to the rain or damp surroundings;

Prevent this product from falling as that could result in serious damage;

Do not dismantle, repair or modify this product on your own;

In order to avoid any risk, do not dispose this product inappropriately or toss it into the fire as there is a

built-in lithium battery.

II. Considerate Hints

1) Do not keep volume at a consistent high level as this could shorten the service life of this product or

impair your hearing;

2) When encountering any fault during operation, please cut off the power supply and disconnect the USB

cable to prevent further damage to the speaker or other components;

3) The Bluetooth transmission range or connectivity could be affected by low battery power. In that case,

please recharge immediately.

Outer Appearance and Function Buttons

/ ：Click to pause during Bluetooth play and click to play during Bluetooth pause. Click to receive calls at

Bluetooth state. Hold down the button to refuse the calls.

III. Product Parameters

Power

switch

MicroUSB charge

interface

3.5 Aux input

interface

Indicator light and functional

buttons

NFC icon

Summary of content (8 pages)

PAGE 1
User Manual for the Bluetooth Speaker BM209 Thank you for purchasing this Bluetooth speaker BM209. Before getting started, please read the user's manual carefully so as to ensure proper operation and optimized performance of this product. I.
PAGE 2
Product Model：BM209 Bluetooth Specifications：Bluetooth V2.1+EDR（A2DP） Transmission Distance：≤10M （depending upon operation environment and devices to which it connects)） USB Recharge Voltage：DC 5V/800mA Built-in Battery：Lithium battery Output Power: 3W×2 Frequency Response: 90Hz-20KHz Sensitivity: 80db±2db Signal to Noise Ratio (SNR): ≥76dB Size : 208*φ58mm Ⅳ. System Composition 1. Speaker 1 set 2．USB Power Cable 1 set 3. User Manual 1 copy Ⅴ．Common Function Description BLUETOOTH OPERATION 1.
PAGE 3
(problem) Solutions 1. Unable to pair up with other devices Check whether the speaker is still in the process of search or switch it off and then back on. 2. There are too many Bluetooth devices in the proximity that cause difficulty in connection. Please turn them off. The sound is rather low or distorted 1. 2. Check the Bluetooth device’s volume and then adjust it to a proper level. Recharge the battery 1.
PAGE 4
Apariencia Exterior y Botones de Función Icono NFC Luz indicadora y botones de función Interfaz de carga Interfaz de entrada auxiliar 3.5 microUSB Interruptor de alimentación / : Haga clic para pausar durante la reproducción por Bluetooth y haga clic nuevamente para reproducir con el Bluetooth pausado. Haga clic para contestar las llamadas en estado de Bluetooth. Mantenga pulsado el botón para rechazar las llamadas. VI.
PAGE 5
6. 7. 8. 9. Encienda el altavoz. Active la función NFC en el dispositivo. Toque suavemente la NFC en el lado del altavoz que exhibe el dispositivo NFC compatible. Una ventana emergente aparecerá preguntando si desea proceder con la conexión en el dispositivo. Seleccione "Sí". 10. Para desconectar el dispositivo NFC, toque la NFC de nuevo. OPERACIÓN DE REPRODUCCIÓN AUXILIAR 3. Encienda el altavoz. 4. Inserte un cable de audio de 3.
PAGE 6
Notice d’utilisation de l’enceinte Bluetooth BM209 Merci d’avoir acheté cette enceinte Bluetooth BM209. Avant de démarrer, veuillez lire attentivement la notice d’utilisation afin d’assurer le bon fonctionnement et une performance optimale de ce produit. VII.
PAGE 7
IX. Paramètres du produit Modèle du produit：BM209 Spécifications Bluetooth：Bluetooth V2.1+EDR（A2DP） Portée：≤10M （selon le contexte opérationnel et les dispositifs auxquels elle se connecte） Tension de recharge USB：CC 5V/800mA Batterie intégrée：Batterie en lithium-ion Puissance de sortie: 3W×2 Réponse en fréquence: 90Hz-20KHz Sensibilité: 80db±2db Rapport signal/bruit (SNR): ≥76dB Taille: 208*φ58mm Ⅳ. Composition du système 1. Enceinte 1 2. Câble alimentation USB 1 3.
PAGE 8
Bluetooth : Le V2.1+EDR consiste en des protocoles tels qu’A2DP, AVRCP et HFP etc. Ⅶ. Dépannage (Problème) Solutions 5. Impossible de jumeler avec d’autres dispositifs Le son est assez bas ou déformé La musique s’arrête de temps en temps L’indicateur Bluetooth reste éteint Vérifier si l’enceinte est toujours en cours de recherche, ou bien éteindre et rallumer. 6. Il y a trop de dispositifs Bluetooth à proximité qui empêche la connexion de s’établir. Veuillez les éteindre. 5.