TDS

TECHNICAL DATA SHEET
Effective: April 25, 2017
Page 1 of 2
[phone] | homedepot.com
PHYSICAL PROPERTIES & PACKAGING (FLOATING MULTILAYER MODULAR FLOORING)
Construction
Extruded Vinyl Core
Top Layer
Pre-Attached Underlayment
7.0mm Gauge / 6mil Wear Layer – 190 Plank
4.0mm (0.157") Rigid Core
2.0mm (0.079") Luxury Vinyl Tile (LVT)
1.0mm (0.039") HDPE with Ultra-Fresh
7.0mm Gauge / 6mil Wear Layer – Wide Plank
4.0mm (0.157") Rigid Core
2.0mm (0.079") Luxury Vinyl Tile (LVT)
1.0mm (0.039") HDPE with Ultra-Fresh
Use
Light Commercial & Residential
Light Commercial & Residential
Size
7.48" x 47.64" (190mm x 1210mm)
8.66" x 47.64" (220mm x 1210mm)
Wear Layer
6mil (0.15mm)
6mil (0.15mm)
Edge Detail
Square Edge
Square Edge
Finish
Urethane with Enhanced
Ceramic Bead (ECB) & Ultra-Fresh
Urethane with Enhanced
Ceramic Bead (ECB) & Ultra-Fresh
Embossing(s)
In-Register
Handscraped, Honed, In-Register
Gauge
7.0mm (0.276”)
7.0mm (0.276”)
Pieces/Carton
8
7
Coverage/Piece
2.475 Sq.Ft. (0.2299 Sq.M.)
2.865 Sq.Ft. (0.2662 Sq.M.)
Coverage/Carton
19.8 Sq.Ft. (1.839 Sq.M.)
20.055 Sq.Ft. (1.863 Sq.M.)
Limited Warranty
5-Year Light Commercial / Lifetime Residential
5-Year Light Commercial / Lifetime Residential
NORTH AMERICAN STANDARDS – SAFETY & PERFORMANCE
Standard
Description
Requirements
Results
ASTM E648
Radiant Panel (Critical Radiant Flux)
Class I: ≥ 0.45 W/cm
2
Passes Requirements
ASTM E662
Smoke Density
Flaming & Non-Flaming ≤ 450
Passes Requirements
ASTM D2047
Coefficient of Friction (Slip Resistance)
N/A
≥0.6 (Dry)
ASTM F970
Static Load
±0.005”, 250-Lbs. Load
Passes Requirements
SIM Test
Static Load Limit
Test to Limit
≥500 lbs.
ASTM F2199
Dimensional Stability
≤0.020"/Linear Foot
Surpasses Requirements
ASTM F925
Chemical Resistance
No more than “Slight Change”
Surpasses Requirements
ASTM F1514
Resistance to Heat
Average & Max ΔΕ < 8.0
Surpasses Requirements
ASTM F1515
Resistance to Light
Average & Max ΔΕ < 8.0
Surpasses Requirements
ASTM G21
1
Antifungal Activity
N/A
Top: 0-1; Bottom: 0-1
ASTM F963
Heavy Metals
Refer to Standard
Passes Requirements
ASTM D7823
Phthalates
Refer to Standard
Meets CPSIA Guidelines
NALFA/ANSI STANDARDS (LF-01-2011) – PERFORMANCE
Standard
Description
Class 1
(Residential)
Class 2
(Light Commercial)
Class 3
(Commercial)
Class 4
(Heavy Commercial)
Meets
Requirements
Section 3.2
Thickness Swell
≤18%
≤16%
≤16%
≤12%
Classes 1-4
Section 3.5
2
Large Ball IR
>800mm/31.5”
>1,000mm/39.4”
>1,200mm/47.3”
>1,400mm/55.1”
Classes 1-4
Section 3.6
2
Small Ball IR
>200mm/7.9”
>200mm/7.9”
>350mm/13.8”
>500mm/19.7”
Classes 1-4
Section 3.10
Surface Bonding
1 N/mm
2
1.25 N/mm
2
1.25 N/mm
2
1.5 N/mm
2
Classes 1-4