TDS

TECHNICAL DATA SHEET
Effective: July 11, 2017 Page 1 of 2 [phone] | homedepot.com
PHYSICAL PROPERTIES & PACKAGING (FLOATING MULTILAYER MODULAR FLOORING)
Construction
Extruded Vinyl Core
Top Layer
Pre-Attached Underlayment
8.0mm Gauge / 22mil Wear Layer – XXL Plank
5.0mm (0.197") Rigid Core
2.0mm (0.079") Luxury Vinyl Tile (LVT)
1.0mm (0.039") HDPE with Ultra-Fresh
Use
Light Commercial & Residential
Size 8.7" x 72" (220mm x 1828.8mm)
Wear Layer 22mil (0.55mm)
Edge Detail Square Edge
Finish
Urethane with Enhanced
Ceramic Bead (ECB) & Ultra-Fresh
Embossing(s) In-Register
Gauge 8.0mm (0.315”)
Pieces/Carton 6
Coverage/Piece 4
1
/
3
Sq.Ft. (0.4023 Sq.M.)
Coverage/Carton 26.00 Sq.Ft. (2.414 Sq.M.)
Limited Warranty 10-Year Light Commercial / Lifetime Residential
NORTH AMERICAN STANDARDS – SAFETY & PERFORMANCE
Standard Description Requirements Results
ASTM E648
Radiant Panel (Critical Radiant Flux) Class I: ≥ 0.45 W/cm
2
Passes Requirements
ASTM E662 Smoke Density Flaming & Non-Flaming ≤ 450 Passes Requirements
ASTM D2047 Coefficient of Friction (Slip Resistance) N/A ≥0.6 (Dry)
ASTM F970 Static Load ±0.005”, 250-Lbs. Load Passes Requirements
SIM Test Static Load Limit Test to Limit ≥500 lbs.
ASTM F2199 Dimensional Stability ≤0.020"/Linear Foot Surpasses Requirements
ASTM F925 Chemical Resistance No more than “Slight Change” Surpasses Requirements
ASTM F1514 Resistance to Heat Average & Max ΔΕ < 8.0 Surpasses Requirements
ASTM F1515 Resistance to Light Average & Max ΔΕ < 8.0 Surpasses Requirements
ASTM G21
1
Antifungal Activity N/A Top: 0-1; Bottom: 0-1
ASTM F963 Heavy Metals Refer to Standard Passes Requirements
ASTM D7823 Phthalates Refer to Standard Meets CPSIA Guidelines
ASTM F410 Wear Layer Thickness Commercial: ≥20mil (0.5mm) Passes Requirements
ASTM D4060 Abrasion Resistance N/A Average: ≥20,000 cycles
NALFA/ANSI STANDARDS (LF-01-2011) – PERFORMANCE
Standard Description Class 1
(Residential)
Class 2
(Light Commercial)
Class 3
(Commercial)
Class 4
(Heavy Commercial)
Meets
Requirements
Section 3.2 Thickness Swell ≤18% ≤16% ≤16% ≤12% Classes 1-4
Section 3.5
2
Large Ball IR >800mm/31.5” >1,000mm/39.4” >1,200mm/47.3” >1,400mm/55.1” Classes 1-4
Section 3.6
2
Small Ball IR >200mm/7.9” >200mm/7.9” >350mm/13.8” >500mm/19.7” Classes 1-4
Section 3.10 Surface Bonding 1 N/mm
2
1.25 N/mm
2
1.25 N/mm
2
1.5 N/mm
2
Classes 1-4