Full Product Manual

11
OPERATING INSTRUCTIONS
1. Turn the heater on or off by pressing the Power
button on the control panel (C) or by pressing
the ON/OFF button on the remote control (B).
Once the power is off, heating elements will
stop working first. The fan will continue working
for up to 90 seconds to dispense residual heat
inside the heater. This is a normal function.
1
C B
2. Select a heat setting by pressing the MODE
button on either the control panel (C) or the
remote control (B) to toggle between the three
heat settings.
Power for High is 1,500 W; Low is 1,000 W. ECO
mode is an economic energy saving function.
When ECO mode is chosen, the heater will
operate to maintain a constant warm 68°F.
Note: The ECO LED light will only illuminate
when the ECO function is active and the
ambient room temperature falls below
68ºF / 20ºC.
2
C B
HIGH LOWECO
3. Set the temperature by pressing the arrows on
the control panel (C) or the remote control (B).
You can set the temperature on the heater
anywhere between 50°F and 90°F or between
10°C and 32°C. Once you have chosen the
desired temperature, the heater will remain
on until the room temperature increases to the
temperature on the digital display. The heater
will cycle on and off to maintain the desired
room temperature.
To view the ambient temperature press the
ambient temperature button on the control
panel.
Note: To switch between Fahrenheit and
Celsius, press and hold the ambient
temperature button on the control panel
(C) for 5 seconds.
Note: To engage the child lock on the remote (B),
press and hold for 3 seconds. Deactivate
the lock by repeating these steps.
3
C
B
OR
C B