Full Product Manual

12
OPERATING INSTRUCTIONS
4. To set the timer power off, start the unit and
press the Timer button on the control panel
(C) or remote control (B).
Note: The timer-power-off function can only
be set when the heater is in power-on
mode.
The digital display on the control panel (C)
changes from the set temperature readout
to a time value for the timer. Press the Timer
button repeatedly to change the number value
between a range of 0 to 12 hours (in 1-hour
intervals).
The Timer light turns on when the timer is
set.
4
C
B
TIMER
5. To set the timer power on, while powering off
the unit press the Timer button on the control
panel (C).
Note: The timer-power-on function can only
be set when the heater is in power-off
mode.
The digital display on the control panel (C)
will indicate time value for the timer. Press
the Timer button repeatedly to change the
number value between a range of 0 to 12
hours (in 1-hour intervals).
The Timer light turns on when the timer is
set.
5
C
B
TIMER
6. To replace the batteries, remove the battery
cover (1) from the remote (B) by applying
pressure to the battery cover (1) and sliding
it away from the remote (B). Insert two AAA
batteries (not included) (2) and close the
remote by placing the battery cover (1) back
on the remote (B).
Note: Do not mix old and new batteries. Do
not mix alkaline, standard (carbon-zinc),
or rechargeable (NiCad, ni-mh, etc)
batteries.
6
B
1 2