Operation Manual

Console Overview

Starting the Treadmill

1. Turn the power switch on. It is located on the front right corner of the

treadmill.

2. The current user weight will be ashing on the display panel. Adjust your

weight to obtain accurate calorie calculations.

3. Make sure the safety key is engaged in the console.

4. Press the Start button to start the treadmill belt. The console will start

counting up from 0:00.

5. Press the buttons to adjust speed, or use the Preset key to go directly

to your preferred speed (which defaults to 1.5 mph). See the separate

section on Preset, as well as the section on Settings, for more details.

NOTE: The display will show "–––" if the Safety Key is not engaged.

Innovative Features

Intelli-Step

– LifeSpan treadmill desks come with Intelli-Step our exclusive

step counting feature that senses each time your foot lands on the walking

belt and counts your step total on the display console. If you’re in the habit of

counting daily steps or want to incorporate a daily or weekly step count goal

this feature will provide more accurate step counting than using a smartwatch

or other wearable step counting device on your wrist. Accuracy does require

that the treadmill desk is able to detect your steps and will be less accurate

for those who walk lightly including those individuals under a 100 pounds

(45.5 KG).

NOTE:

The steps are counted normally from 1 to 9,999 steps. After 9,999

steps, the display format changes to accommodate more than four

digits. Take the number shown in the display and add a zero to the

right for the correct number of steps.

Below are examples of what the display will read and what those

numbers mean:

1001 = 10,010 steps 1005 = 10,050 steps 1100 = 11,000 steps