Installation Manual

7
Step 2: Selecting a lighting location
■
■
Lay the lights out, below their intended installation location.
Determine how you want the light to fall.
Position the lights to give the desired illumination on counter.
■ For optimal lighting, the lights should be located
toward the front of the cabinet.
Step 3: Install mounting brackets
1.
2.
3.
4.
Establish location for mounting brackets*.
Measure and mark location for pilot hole.
Drill 1/16th” hole. (Optional)
Mount mounting brackets.
*For Lilium LED light panel, pull the blue label
to locate the mounting hole.
Double sided adhesive tape can be used
alternative to mounting brackets.
For most of cases, mounting bracket can be
installed using the screwdriver only. However,
if you find it difficult, please pre-drill a small
hole for screw.
Lightkiwi® Modular LED Under Cabinet Lighting