User's Manual

20
1. Overview 2. Installation 3. Setup & Use 4. Troubleshooting
5. Warranty &
Specifications
21
1. Overview 2. Installation 3. Setup & Use 4. Troubleshooting
5. Warranty &
Specifications
The CAT AVfour System has been thoroughly tested as a complete system prior
to shipment. Factory default settings have been pre-set into the system. To make
installation as easy as possible, perform the following two steps before installing
the Amplifier module.
1. Synchronize the Wireless Control to the system.
2. Perform the IR Learn function to learn the IR codes from the projector remote
control.
Note: Step 2. only needs to be performed on the first classroom installation of a
series of classrooms containing the same make and model of projector. After the
first classroom, the wireless control can be used to copy set-up information to
each remaining system.
SECTION 2:
INSTALLATION
IMPORTANT SAFETY INSTRUCTIONS
PRE-INSTALLATION
Pre-Install Procedure
1. Find the Amplifier module and its
power supply.
2. Plug the DC power plug into the
power receptacle on the Amplifier.
3. Plug the AC power plug into an
appropriate wall outlet.
4. Turn the system power ON by
pushing the system power button
on the wireless control. The power
LED on the Amplifier will light.
5. Remove the battery door from the
back of the wireless control
6. Push the pairing button located
in the wireless control battery
compartment followed closely
by the pairing button on the
Amplifier.
7. Turn the system power OFF and
remove the power connections to
the Amplifier module.
• Onlyuseattachments/accessories
specified by the manufacturer.
• Unplugthisproductduring
lightning storms or when unused
for long periods of time.
• Referallservicingtoqualied
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as power-supply cord or plug is
damaged, liquid has been spilled
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
1. Instructional Literature
—All
safety and operation instructions
should be read before this
Lightspeed product is operated.
The safety and operating
instructions should be kept for
future reference. All operating and
other instructions should
be followed.
2. Heed Warnings—All warnings
on this Lightspeed product and
in these instructions should be
followed.
3. Water, Heat and Moisture—This
Lightspeed product should not be
used near water. Care should be
taken so that objects do not fall
onto and liquids are not spilled
into the Lightspeed product. This
Lightspeed product should be
situated away from heat sources
such as radiators, etc.
4. Power—This Lightspeed product
should be connected to a power
supply only of the type described
in the operation instructions or
as marked on this Lightspeed
product. Power supply cords
should be routed so that they
are not likely to be walked upon
or pinched by items placed
upon or against them. Do not
use this polarized plug with an
extension cord, receptacle or
other outlet unless the blades can
be fully inserted to prevent blade
exposure.
5. Damage Requiring Service—This
Lightspeed product should be
serviced only by qualified service
personnel. The user should not
attempt to service this Lightspeed
product. Keep all original
packaging for easy transport if
repair or return is necessary.
• Readtheseinstructions.Keep
them in a location where you have
easy access to them.
• Heedallwarningsandfollowall
instructions
• Donotusethisproductnearwater.
• Cleanonlywithadrycloth.
• Donotblockanyventilation
openings. Install in accordance
with the manufacturer’s
instructions.
• Donotinstallnearanyheat
sources such as radiators, heat
registers, stoves, or other products
apparatus (including amplifiers)
that produce heat.
• Donotdefeatthesafetypurpose
of the polarized or grounding type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the
third prong are provided for your
safety. If the provided plug does
not fit into your outlet, consult an
electrician for replacement of the
obsolete outlet.
• Protectthepowercordfrombeing
walked on or pinched particularly
at plugs, convenience receptacles,
and the point where they exit from
the apparatus.
IMPORTANT SAFETY INSTRUCTIONS CONT’D