User's Manual

32
1. Overview 2. Installation 3. Setup & Use 4. Troubleshooting
5. Warranty &
Specifications
33
1. Overview 2. Installation 3. Setup & Use 4. Troubleshooting
5. Warranty &
Specifications
Procedure:
1. Enter Set Up Mode
2. Make sure LED 6 is glowing green
or:
a. Push the Microphone Mute
button
b. Use the up & down arrow
buttons until LED 6 lights
3. Push the Mute AV Source button.
The first green LED next to the
Select button will light.
4. The frequency band is represented
using the volume level LEDs. The
center is zero. The band can be
boosted by using the up arrow key
to increase the setting or cut by
using the down arrow key.
5. Use the Select button to move
through the bands from low to
high as shown in figure xx.
6. Repeat step 4 to adjust each
frequency band.
7. Push the Microphone Mute button
to leave this set up mode and
select another function.
6. EQUALIZER LEVEL SETTING CONT’D
Picture of LED 6 lit &
location of AV Mute & Mute
buttons
Picture of selector showing
the new meaning of the
select LEDS (frequency 1:
500Hz, frequency 2: 1000Hz,
frequency 3: 2000Hz,
frequency 4: 4000Hz)
Procedure:
1. Enter Set Up Mode
2. Make sure LED 5 is glowing green
or:
a. Push the Microphone Mute
button
b. Use the up & down arrow
buttons until LED 5 lights
3. Push the Mute AV Source button.
The first green LED next to the
Select button will light.
4. The frequency band is represented
using the volume level LEDs. The
center is zero. The band can be
boosted by using the up arrow key
to increase the setting or cut by
using the down arrow key.
5. Use the Select button to move
through the bands from low to
high as shown in figure xx.
6. Repeat step 4 to adjust each
frequency band.
7. Push the Microphone Mute button
to leave this set up mode and
select another function.
The tone control is used to personalize the sound of music played through the
CAT AV system. Using the tone control you can increase or decrease the base,
mid frequency, or treble tone of the music. The result will be a full range natural
sound for multimedia.
7. TONE CONTROL SETTING
Picture of LED 5 lit & location of
AV Mute & Mute buttons
Picture of selector showing the
new meaning of the select LEDS
(Bass: 500Hz range, Mid: 1000Hz
range, Treble: 2000Hz range)