User's Manual

4
1. Overview 2. Installation 3. Setup & Use 4. Troubleshooting
5. Warranty &
Specifications
1. Overview 2. Installation 3. Setup & Use 4. Troubleshooting
5. Warranty &
Specifications
5
CAT AV is truly the media hub of the classroom supporting speech
reinforcement, full range multimedia sound, and video switching and control.
The unique wireless control that can be mounted anywhere in the classroom and
moved as often as necessary as there are no wires to install or move. You can
locate it on your teaching wall or you can take with you for control anywhere in
the room. Up to four infrared wireless REDMIKE Volume control microphones
provide clear distribution of the teachers voice across the entire classroom.
The AV switcher allows up to four audio and video inputs (two VGA and two
composite). The switcher directs the selected AV input and sends the Audio via
CAT-5 cable to the system amplifier. It also directs the selected video signal to
the Video Converter module where it is converted back to its appropriate video
connector and signal type to connect with the classroom projector.
Designed for the classroom, CAT AV is fast and simple to install. Three CAT-5
twisted pair cables carry audio and video signals, control signals and power
between all system modules and plenum rated speaker wire carries the amplified
audio to the ceiling speaker(s).
This user guide includes all of the information necessary for installation, set up
and operation of the CAT AV system. Call Lightspeed Technologies, Inc. at 800-
732-8999 with any questions regarding this system.
SECTION 1:
OVERVIEW
SYSTEM COMPONENTS AND UNPACKING
The standard configuration of the CAT AV will contain:
Amplifier and Cable
Wireless
Selector with
Wall Mount
I/O Switcher and Cable
System Power Supply
SYSTEM OVERVIEW