User's Manual

8
1. Overview 2. Installation 3. Setup & Use 4. Troubleshooting
5. Warranty &
Specifications
1. Overview 2. Installation 3. Setup & Use 4. Troubleshooting
5. Warranty &
Specifications
9
FEATURES
WIRELESS CONTROL
CAT AV’s wireless RF selector gives
maximum flexibility for the teacher. It
can be mounted to a wall or carried
to give control anywhere in the
classroom.
AUDIO INPUTS
CAT AV Switcher can select between
four multimedia audio inputs
(associated with the video inputs).
MICROPHONE INPUTS
Up to four infrared microphone
transmitters can be used for the
wireless transmission of the teacher’s
voice. Each microphone has it’s own
volume control or the wireless control
panel can be used to set microphone
output level.
VIDEO INPUTS
CAT AV Switcher can select between
four inputs (two VGA and two
composite).
ALD AUDIO OUTPUT
CAT AV outputs a mixed audio
output (both multimedia audio and
voice) through the ALD output jack
located on the Switcher front panel.
The output includes an independent
volume control. This audio output can
be used for connection to a recording
or listening device.
TWISTED PAIR OUTPUTS
CAT AV switcher outputs Audio to
the Amplifier and Video to the Video
Converter modules through two RJ-45
connectors. Audio and video signals
can be transmitted via CAT-5 cable up
to 100 ft away.
CHECK AUDIO OUTPUT TO
SPEAKERS
16 W per channel (32 W total) output
for 1 to 4 speakers
PAGEFIRST
CAT AV connects to the classroom
paging system using an optional
paging sensor. When a page is
sensed, it mutes all audio output from
the CAT AV System during the page.
Audio is returned to its normal levels
when the page is complete.
AUTO PROJECTOR SHUTDOWN
To save energy and maximize
projector bulb life, CAT AV will turn
the projector off at a predetermined
interval after all audio inputs have
stopped. Time can be set in 30
minute intervals from 0 minutes to 3
hours.
EQUALIZER & TONE CONTROLS
Classroom acoustics are different
from room to room. To provide
the highest speech intelligibility
and natural sounding multimedia,
provision for digital adjustment is
provided for during initial system set
up.
IR LEARN MODE
CAT AV learns from your projectors
remote control. IR control codes are
learned directly from the projector’s
remote control. Codes: Projector On
& OFF, Input connection (VGA or
Video), and Video Mute.
1) CAT AV System with
Optional Page First Sensor
Connection
2) CAT AV System with four
ceiling or wall speakers
3) CAT AV System basic
interconnection using MCQ
multimedia ceiling speaker
APPLICATIONS DIAGRAM
Here are three example diagrams of application setups.
THIS IS A ROUGH
SKETCH OF A DIAGRAM
THAT IS BEING
DESIGNED