User's Manual

10
1. Overview 2. Installation 3. Setup & Use 4. Troubleshooting
5. Warranty &
Specifications
1. Overview 2. Installation 3. Setup & Use 4. Troubleshooting
5. Warranty &
Specifications
11
WIRELESS SELECTOR CONTROLS
1. CAT AV SYSTEM POWER
SWITCH/POWER INDICATOR:
This switch is used to turn the
system power ON and OFF. When
POWER is ON, the POWER light
will glow green
2. PROJECTOR POWER ON/
PROJECTOR POWER
INDICATOR: Pushbutton sends
IR code to the projector to turn its
power ON. When Power is ON,
the projector power light will glow
green.
3. PROJECTOR POWER OFF:
Pushbutton sends an IR code to
the projector to turn its power
OFF. When Power is OFF, the
projector power ON light will be
OFF.
NOTE: Some projectors will turn
off with a single push of the OFF
button. Other projectors require
two pushes.
4. AV INPUT SOURCE SELECT
AND SOURCE INDICATORS:
Pushbutton selects the audio and
video input source as Follows:
A. VGA input 1
B. VGA input 2
C. Composite Video input 1
D. Composite Video input 2
NOTE: AV input labels for lights A,
B, C, and D can be customized to
match the AV sources connected
to the corresponding AV input on
the Switcher module.
The light will glow green when
the corresponding AV source is
selected.
5. MICROPHONE MUTE/MUTE
INDICATOR: Pushbutton mutes
all audio except the teacher’s
microphone. When Mute is
pushed, the Mute light will glow
green.
2
2
1
3
4
7
8
9
5
6
WIRELESS SELECTOR CONTROLS CONT’D
6. AV MUTE/AV MUTE
INDICATOR: Pushbutton blanks
the video being displayed and
mutes its associated audio. When
AV Mute is on, the AV mute light
will glow green.
7. VOLUME UP: Pushing the volume
up button causes the selected
source volume to increment by 1
db.
8. VOLUME DOWN: Pushing the
volume down button causes
the selected source volume to
decrement by 1 db.
9. VOLUME LEVEL LIGHTS:
Indicates the relative volume
level for the source selected.
Three pushes of the Volume UP
pushbutton will increment to the
next higher light to glow green.
Likewise, three pushes of the
Volume DOWN pushbutton will
decrement to the next lower light
to glow green. Volume levels are
saved in memory so will return to
the previously set level when the
AV source is selected again.
10. MODE SWITCH: Selects
between normal operation and
set-up mode. In set-up mode the
front panel switches take on new
meaning. See Set-Up Section of
this document for information.
11. PAIRING BUTTON: Synchronizes
the Wireless Selector to the system
for exclusive operation.
10
11
Rear Panel