User's Manual

12
1. Overview 2. Installation 3. Setup & Use 4. Troubleshooting
5. Warranty &
Specifications
1. Overview 2. Installation 3. Setup & Use 4. Troubleshooting
5. Warranty &
Specifications
13
I/O SWITCHER FRONT PANEL
CONNECTORS AND CONTROLS
1. VGA VIDEO WITH AUDIO 1:
A 15 pin VGA Video connector and
3.5 mm Audio connector input for
source 1.
2. VGA VIDEO WITH AUDIO 2: A
15 pin VGA Video connector and
3.5 mm Audio connector input for
source 2.
3. COMPOSITE VIDEO WITH LEFT
AND RIGHT AUDIO 1: Yellow
RCA connector for Composite
Video with Red RCA connector
for Right Audio and White RCA
connector for Left Audio.
4. COMPOSITE VIDEO WITH LEFT
AND RIGHT AUDIO 2: Yellow
RCA connector for Composite
Video with Red RCA connector
for Right Audio and White RCA
connector for Left Audio.
5. POWER LIGHT: Glows green
when power is received from the
Amplifier module
6. ALD AUDIO OUTPUT: 3.5 mm
stereo jack sends audio signal
to external equipment such as a
recorder or an assistive listening
device like Lightspeeds LES-370
Personal FM System.
7. ALD VOLUME CONTROL:
Adjusts the Audio signal level
output through the ALD Audio
Output connector.
2
2
1
3
4
7
5
6
I/O SWITCHER BOTTOM PANEL
CONNECTORS
1. AUDIO OUTPUT/ALD AUDIO
INPUT JACK: RJ-45 connector
for carrying audio signals to the
Amplifier and ALD Audio signals
back from the Amplifier. Power for
the Switcher is also carried on the
connecting CAT-5e cable.
2. VIDEO OUTPUT JACK: RJ-45
connector for carrying video
signals to the Video Converter
module. The connecting CAT-5e
cable also carries power for the
Video Converter module and
projector control signals.
“(Picture of bottom side of the switcher showing
connectors)”
Need image – there’s not one in the Word File.