Instruction Manual

Section 3: Installation Spirit II User’s Manual

This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to

non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.

3-18

Plasma Console Connections

Perform the following steps to connect the plasma console to the Spirit system.

CAN Communications

• Insert the male end of the CAN communication cable. See "CAN Communication

Connections" for more details.

CAN Communications

• Insert the female end of the CAN communication cable or the CAN termination plug,

depending upon the connection scheme. See "CAN Communication Connections"

for more details.

RS-422 Communications

• Insert an RS-422 cable, if necessary, to connect to other devices.

RS-422 Communications

• Insert an RS-422 cable, if necessary, to connect to other devices.

USB

• Either USB port can be used to update the Spirit II software.

Ethernet

• No connection. For future development.