Instruction Manual

Spirit II User’s Manual Section 4: Operation with Automatic Gas Console
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
4-1
Section 4: Operation
Operating the Plasma Console
The Plasma Console is the touch screen interface to the entire Spirit system when the
Automatic Gas Console (AGC) is used instead of the Manual Gas Console (MGC).
OFF Button
Push to disable the Spirit system.
Release (turn to the right) to enable
the system, which can then be
energized using the ON Button.
Touch Screen
Turns on automatically when AC
power is applied to the Spirit system.
Press the screen to operate as
described below.
Navigation and ON Button
Press the navigation buttons to access the various screens described in this section.
Change settings by simply pressing that part of the screen.
Navigation Buttons
Press to access the desired screen.
ON Button
Press to energize the system (the
OFF Button must be released first).
This button also indicates three
different system conditions:
The system is ON; cooling fans
and coolant pump are running.
The system is OFF.
Press to turn
the system ON.
The system is OFF, but enabled
(OFF Button has been released)
.
Press to turn the system ON.